Author Topic: A good place to but a button on a wired pad....  (Read 5539 times)

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
A good place to but a button on a wired pad....
« on: August 19, 2010, 12:58:40 PM »
Well as some of you know I'm currently backpacking around europe.... but still it dont stop me from modding.... well i did this a while back before i left home.... but i've got my netbook and i had my "mods" file sent out on a flash stick to me so i can clear some of my back log of work so here it is...

a good suttle place to put a mod button on your wired controllers.... for any mods that need a grounded tactile..... ie RF chips, flasher chips, fader chips ect....


first solder your tactile to the ground at the top of the pad near the usb wire... the red wire on the tactile runs to whatever mod chip you have installed.....



then carefully drill a hole in the top rail for it to slot through....


check it all fits and works right then secure it with some hot glue


and  here's the final product.......

« Last Edit: August 19, 2010, 01:12:55 PM by spurgurgle »

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline XxKILLx3RxX

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +0/-0
Re: A good place to but a button on a wired pad....
« Reply #1 on: August 21, 2010, 12:08:41 AM »
do you think it would fit on a wireless controller? but on the other side, where there is no sync button?

Offline IndyChav

  • Original.
  • E = MC² Mad Scientist
  • *
  • Posts: 2315
  • Post quality +2/-0
  • Gender: Male

Re: A good place to but a button on a wired pad....
« Reply #2 on: August 21, 2010, 08:13:12 AM »
Awesome tutorial, Since you're global can you move it to tutorials though, More people will see it that way [=

Offline radddogg

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 53
  • Post quality +0/-0
  • Acidmods User
Re: A good place to but a button on a wired pad....
« Reply #3 on: August 21, 2010, 04:22:48 PM »
do you think it would fit on a wireless controller? but on the other side, where there is no sync button?
Yes but you would have to be wary of the metal tab that goes round the PnC.




By the way, what is the tab for? I've got a nasty feeling its an aerial for the wireless as I took mine off when I removed the PnC plug and ever since the wireless disconnects unless I'm right next to it.
« Last Edit: August 21, 2010, 04:23:34 PM by radddogg »

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: A good place to but a button on a wired pad....
« Reply #4 on: August 22, 2010, 03:18:45 AM »
do you think it would fit on a wireless controller? but on the other side, where there is no sync button?

also there is no ground up there on a wireless pad so you cant solder the button straight there.....

i have put a button there before but it gets blocked by the PnP charge lead when u plug it in.....



Post Merge: August 22, 2010, 03:20:37 AM
Awesome tutorial, Since you're global can you move it to tutorials though, More people will see it that way [=

hmmm i guess it is a tutorial really.... but i didnt think of it as a tut whilst making it..... also im not in charge of the tuts section..... but now u mention it yeah it should be in the tuts area so here we go ill shall move it.....
« Last Edit: August 22, 2010, 03:20:37 AM by spurgurgle »

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: A good place to but a button on a wired pad....
« Reply #5 on: August 23, 2010, 12:58:33 PM »
By the way, what is the tab for? I've got a nasty feeling its an aerial for the wireless as I took mine off when I removed the PnC plug and ever since the wireless disconnects unless I'm right next to it.
Yes it's the Antenna.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal