PSP modding Question

[baseball3]

Hi, i was just wondering if you had to use 30 guage wire for the PSP led trigger mod.
Thanks in advance.

[RawryP]

It helps to use a fine wire, so 30 is good. But if your soldering isn't too good or something you could go up to 25ish I suppose, maybe bigger.

Also, welcome to AM.

[baseball3]

Thanks for the greeting and quick reply. I also have another question. Does the wire have to be Kynar?
Thanks in advance.

P.S. I dont have any modding experience.
But i have electronics experience

[wasu]

Thanks for the greeting and quick reply. I also have another question. Does the wire have to be Kynar?
Thanks in advance.

P.S. I dont have any modding experience.
But i have electronics experience

kynar is better then magnet wire so yes it has to be kynar but u can use magnet but it will bring problems in the future...so use 30 gauge kynar

[l0rdnic0]

So according to your profile you live in the US... Take a trip to your local Radio Shack and get some of this....

50-Ft. Blue Insulated Wrapping Wire (30AWG)
Model:
278-503
 | Catalog #: 278-503


-or-

50-Ft. Red Insulated Wrapping Wire (30AWG)
Model:
278-501
 | Catalog #: 278-501


-or-

50-Ft. White Insulated Wrapping Wire (30AWG)
Model:
278-502
 | Catalog #: 278-502




The only thing different between them is the color of the jacket on the wire.... Or you could mail order it... but if you live close to a Radio Shack your set.   

[baseball3]

Ok thanks Wasu. l0rdnic0 Thats what i planned to do but i was just checking if you had to use kynar becuase i have some old hook-up wire lying around. Thanks everyone