Author Topic: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision] (Read 42971 times)

sQs · « **on:** February 20, 2011, 06:35:15 PM »

Disculpen por el ingles, soy de Mexico y yo no hablo ingles, esta es una ayuda de nuestro amigo Google.
Sorry for the English, I'm from Mexico and I do not speak English, this is a help to our friend Google.

sQs RapidF 2TC (8 MODES)
------------------------------------------------
-- 6 programed modes & 2 custom programmable --
Author sQs

CHANGES IN FINAL REVISION

- Changing the order of modes
- Fixed some bugs that slows performance
- Fixed some errors in programming mode LED 4
- Fixed Shot burst mode now work perfectly in Right and Left Triggers
- Added fast-forward and fast-rewind in programing mode

CREDITS:
Hazer's (All work is based on Open Source GameplayRF2)
t0pP8uZz (I did it based on the installation of t0pP8uZz for his great tutorial for installation)

MODE 1: - Normal Fire - Gears of War 2 (Hammerburst)
MODE 2: - Normal Fire - Gears of War 2 (Pistol)
MODE 3: - Normal Fire - Modern Warfare 2
MODE 4: - 3 Shot Burst - Modern Warfare 2
MODE 5: - Normal Fire - Black Ops
MODE 6: - 4 Shot Burst - Black Ops
MODE 7: USER PROGRAMMABLE MODE Normal Cycle (Default Speed # 195 for HALO Reach)
MODE 8: USER PROGRAMMABLE MODE with Duty Cycle (Default Speed # 208 for Call of Duty 5)

SUPPORTED CONTROLLERS:
Matrix - Tested/Working
CG - Tested/Working
CG2 - Tested/Working

HOW TO USE

When the controller is powered on.. LED 3 & 4 flashed the number of last used mode.
Both rapidfire triggers will be OFF.
To turn on/off either of the rapidfire just give either tactile a quick press..
the corresponding LED indicator will light up.. indicating that rapidfire is on.

Change Next Mode:
Hold down right tactile.

Change Back Mode:
Hold down left tactile.

Custom Programming:
We need to be in MODO 7 or 8 so we want to programing.
Hold down right and left tactile at the same time for enter programing mode.
Left tactile subtract 1 Speed (More Slow)
Hold left tactile subtract 10 Speed (More Slow), Each flashing at the same time the LED 3 & 4 shall be subtract 10 Speed, release when we want to stop subtracting.
Right tactile add 1 Speed (More Fast)
Hold right tactile add 10 Speed (More Fast), Each flashing at the same time the LED 3 & 4 shall be add 10 Speed, release when we want to stop adding.
You can check the rates table (LED 3 & 4 indicate the speed), INCLUDED IN ZIP FILE
OR
---------- YOU CAN CHECK THE SPEED ON REAL-TIME WITHOUT LEAVE ----------
To save and exit, Hold down right and left tactile at the same time.

NOTE:
Working all perfectly.....

INSTALLATION TUTORIAL: https://www.acidmods.com/forum/index.php/topic,34229.0.html

CG/CG2:

MATRIX:

zip pass:

Code: [Select]

https://www.acidmods.com/

Data Hacker · « **Reply #1 on:** February 20, 2011, 11:26:12 PM »

OMG thank you!!!!

this is the best code on this site!! right next to t0pfire's

my friends say topfires is a little slow compared to what they see other players use but it seems fine for me :/ did you base your speeds and such off of t0pfire's as well?

thanks!! ive been waiting for someone to release something like this!

EDIT: if any of the controllers i install this on are CG or CG2 ill use t0pfire's install diagrams and tell you if its working or not if someone does not beat me too it

EDIT2: t0pfire's code for me had this problem where it got all trippy if i used it while CHARGING like it would randomly aim or sometimes it would not go off of aim and some person shot me and looking at me aim the whole time. or it would shoot randomly (i got some kills like this but i dont like it) i dont know why it does that will reply if it does with this one too or its my install or what.

Anonamous · « **Reply #2 on:** February 21, 2011, 11:25:05 AM »

Quote from: Data Hacker on February 20, 2011, 11:26:12 PM

OMG thank you!!!! this is the best code on this site!! right next to t0pfire's my friends say topfires is a little slow compared to what they see other players use but it seems fine for me :/ did you base your speeds and such off of t0pfire's as well?

thanks!! ive been waiting for someone to release something like this!

EDIT: if any of the controllers i install this on are CG or CG2 ill use t0pfire's install diagrams and tell you if its working or not if someone does not beat me too it

EDIT2: t0pfire's code for me had this problem where it got all trippy if i used it while CHARGING like it would randomly aim or sometimes it would not go off of aim and some person shot me and looking at me aim the whole time. or it would shoot randomly (i got some kills like this but i dont like it) i dont know why it does that will reply if it does with this one too or its my install or what.

It would do that with almost all codes. When using the play and charge kit, the controller is using a higher voltage than with the batteries, so its gonna go a little screwy

sQs · « **Reply #3 on:** February 22, 2011, 09:22:24 PM »

Someone had a problem or can confirm it works or not in CG controller.

TheGeneral · « **Reply #4 on:** March 01, 2011, 07:14:28 AM »

Hello,

Thanks alot for sharing the hex file. I will test the rapidfire on a CG board and post a msg tonight.

Did anyone test this on the Halo Reach game?

Thanks.

Yasin

zxseta · « **Reply #5 on:** March 02, 2011, 07:41:29 AM »

what is the pass of the zip??

sQs · « **Reply #6 on:** March 02, 2011, 07:47:07 AM »

Quote from: zxseta on March 02, 2011, 07:41:29 AM

what is the pass of the zip??

https://www.acidmods.com/

Modded Matt · « **Reply #7 on:** March 02, 2011, 08:30:20 AM »

https://www.acidmods.com/

hk-1978 · « **Reply #8 on:** March 09, 2011, 08:13:12 PM »

is thie hex for PIC 12F683 ??
sorry for noob question

laxboy · « **Reply #9 on:** March 09, 2011, 08:19:10 PM »

Quote from: hk-1978 on March 09, 2011, 08:13:12 PM

is thie hex for PIC 12F683 ??

Yes this is for that chip. All of our rapid fire codes are for that chip.

drummerdude · « **Reply #10 on:** March 20, 2011, 06:03:17 PM »

Just Tryed out this code and its amazing and way better then t0pfire. I love how the burst modes dont require you to hold down the triggers. The blackops mode is very fast compared to other codes too.

freestyler666 · « **Reply #11 on:** March 22, 2011, 03:49:44 AM »

hello friend sorry for my english I'm french ... lol
I did not understand how to get the password for the zip file of SQS?
I've installed since a while the program is going very well t0pP8uZz and I am very happy that I want to test if, but when I click on your link I will return to the home page is I can not find the pass.
sorry for noob's questions.
thank you

drummerdude · « **Reply #12 on:** March 22, 2011, 03:55:19 AM »

I just copy/pasted the link into the password box and that worked for me.

freestyler666 · « **Reply #13 on:** March 22, 2011, 04:02:55 AM »

I thank you very much drummerdude his nickel works

FOOKz™ · « **Reply #14 on:** March 22, 2011, 09:27:43 PM »

Will this install be the same in the new matrix board controllers?

Phantom · « **Reply #15 on:** March 22, 2011, 10:30:11 PM »

i noticed the switched power source on the left side of the board that everyone uses for RF is no longer there on the new matrix. it might have switched power on the headset connector like the CG?

FastBrad · « **Reply #16 on:** March 28, 2011, 01:42:17 AM »

Wow, i just installed this on a cg2 pad, and I gotta tell ya...i'm impressed. I have a viking legacy,flex,t0pfire, a gamermodz pad and another opensource hosted on another site, (lugnuts code) for the veterans here. This code is write up there with the best of them. I have one question, do i need the 330ohm to the trigger pots, coz there is a couple of conflicting illustrations in regards to the install. Anyway kudos to the author well done, and keep up the good work.

drummerdude · « **Reply #17 on:** March 28, 2011, 04:04:23 AM »

No, you dont need the 330 ohms on the triggers for the cg2. Check out the wiring diagram:)

sQs · « **Reply #18 on:** March 28, 2011, 10:40:13 AM »

Someone could upload a picture of the new PCB Matrix.

FastBrad · « **Reply #19 on:** March 30, 2011, 02:38:03 AM »

Hey sqs, love the code being playing bops all day today. One small problem, your black ops mode gets mod blocked. Particularly when you using m16 or g11, and also happened a few times with the fal. Any chance you couls tweak it a little, maybe just a few sps slower. Ps i am a cod fanatic and play a lot.

drummerdude · « **Reply #20 on:** March 30, 2011, 03:48:29 AM »

Ive never gotten blocked using this code on blackops. Maybe you should try using the user programmable mode.

sQs · « **Reply #21 on:** March 30, 2011, 12:15:54 PM »

Quote from: FastBrad on March 30, 2011, 02:38:03 AM

Hey sqs, love the code being playing bops all day today. One small problem, your black ops mode gets mod blocked. Particularly when you using m16 or g11, and also happened a few times with the fal. Any chance you couls tweak it a little, maybe just a few sps slower. Ps i am a cod fanatic and play a lot.

Only thing to lose 1 or 2 sps, but could use the programmable mode with duty cycle, using 194 or lower speed with that is sure to solve the problem.

If deemed necessary could then correct the program mode. Not the views of the rest of the people who to use.

FastBrad · « **Reply #22 on:** March 30, 2011, 02:42:10 PM »

I am only talking about mode 5, nothing else, and I am using the user mode now, however I was simply letting you know about mode 5. I know what am talking about I have been around modding controllers since the original spitfire, of which I still have in my draw. Never the less works well otherwise.

drummerdude · « **Reply #23 on:** March 30, 2011, 02:43:35 PM »

Do you still have the spitfire code?

sQs · « **Reply #24 on:** March 30, 2011, 03:22:15 PM »

Quote from: FastBrad on March 30, 2011, 02:42:10 PM

I am only talking about mode 5, nothing else, and I am using the user mode now, however I was simply letting you know about mode 5. I know what am talking about I have been around modding controllers since the original spitfire, of which I still have in my draw. Never the less works well otherwise.

Ok, I can do something for you, choose the speed that you think fits best for black ops mode 5 and tell me.
To do this test speed in mode 8, the default speed is # 208.

FastBrad · « **Reply #25 on:** March 30, 2011, 06:04:42 PM »

Quote from: drummerdude on March 30, 2011, 02:43:35 PM

Do you still have the spitfire code?

The spitfire code is basically useless now. It was one speed back when cod 4 was first released. It also had the ability to change the mapping of some buttons. I only have it on the chip (16f688) from memory, and I need a new program board. King mike may have the original asm for it maybe, not sure, you would have to ask him.

drummerdude · « **Reply #26 on:** March 30, 2011, 06:05:49 PM »

I guess i dont need it then anyway, if its only a one speed. Thanks anyway. Glad im not missing out on anything...

FastBrad · « **Reply #27 on:** March 30, 2011, 06:07:03 PM »

Quote from: sQs on March 30, 2011, 03:22:15 PM

Ok, I can do something for you, choose the speed that you think fits best for black ops mode 5 and tell me.
To do this test speed in mode 8, the default speed is # 208.

Bops will detect anything over 8.94-9.00 sps. So according to your sps table speed 200.

FastBrad · « **Reply #28 on:** March 30, 2011, 06:11:39 PM »

Quote from: drummerdude on March 30, 2011, 06:05:49 PM

I guess i dont need it then anyway, if its only a one speed. Thanks anyway. Glad im not missing out on anything...

Het man spitfire was the pioneer of chip modded rapid fire controllers. Then people like hazer started working there magic with 8 bit mcu's and walla, gameplay rf was born

One of the main reason's to keep perfecting the codes and adding more features, was to take away the market from the ebay c=nts, who were trying to profit from some peoples genuine interest in the area.

sQs · « **Reply #29 on:** March 30, 2011, 07:04:02 PM »

Quote from: sQs on March 30, 2011, 03:22:15 PM

Ok, I can do something for you, choose the speed that you think fits best for black ops mode 5 and tell me.
To do this test speed in mode 8, the default speed is # 208.

Try this HEX, mode 5 has the speed # 200

News:

Author Topic: sQs RapidF 2TC (8 MODES) (FREE-RELEASE-HEX) [Final Revision] (Read 42971 times)