Author Topic: Clear Analog LED Mod (Read 13161 times)

1TONpete · « **Reply #30 on:** May 10, 2011, 07:18:23 AM »

check it out

FOOKz™ · « **Reply #31 on:** May 12, 2011, 03:40:59 PM »

Nice that looks crispy. I read you tutorial you made and I need to get some of that stuff.

1TONpete · « **Reply #32 on:** May 12, 2011, 11:46:40 PM »

Wait on tute I need to update the tute.

1TONpete · « **Reply #33 on:** May 15, 2011, 06:20:32 PM »

Now taking special requests for custom nubs. Think big. I'll try to do my best to create a mold tailored for you. post ideas here, pm for requests.

whitetop · « **Reply #34 on:** May 15, 2011, 06:40:43 PM »

try a acidmods design on one

if your making them so you can take the top part off and put differ one's on ill like to see a block dice

1TONpete · « **Reply #35 on:** May 15, 2011, 07:01:50 PM »

good ideas white. I was thinking about donating a batch of AM ones to the site.

whitetop · « **Reply #36 on:** May 15, 2011, 07:09:21 PM »

or do a cod/battlefield one with a small bullet in it, but for payed people

1TONpete · « **Reply #37 on:** May 17, 2011, 06:13:33 AM »

I got shells coming later this week hopefully. Talked to my "gun nut" buddy , he's going to collect some shells , so i can mold them.
9mm , .45acp ammo, shotgun , .223 , .762.

i7vSa7vi7y · « **Reply #38 on:** May 18, 2011, 05:45:02 PM »

Nice maybe finally i can get my hands on some clear buttons

1TONpete · « **Reply #39 on:** May 18, 2011, 07:31:36 PM »

All molds are ready except the bullet molds. Next nice day I will make the pour.
I got a couple hours yesterday to do a pour. First batch with the new molds look great.
All parts are unsanded and unpolished , fresh from the mold. Collection of good molds are as fallows:
PS3: buttons x,o,etc ,

dpad ,

thumb sticks 2parts including skull thumb stick,

triggers 1, triggers 2
l2r2

The mold was so good it got the part #

lil finish work done on trigger

R1/L1 modified with insets for leds in back pre-molded. this one got a couple bubbles in it and is NFG.

XBOX: xbox button also skulled,

buttons ,

thumb sticks also 2 parts with a skulled version available. Dpad and triggers coming soon.

PSP : I didn't forget about my favorite console to mod. I just did buttons for now.

more pics coming.

whitetop · « **Reply #40 on:** May 20, 2011, 07:58:29 AM »

looking really nice are these the beta's or final tested ones.

1TONpete · « **Reply #41 on:** May 20, 2011, 08:06:17 AM »

These are first test batch of new beta's. Final molds (mass production molds need to be made now)
these beta's are on par with my quality, I will be using the beta buttons on the sharpshooter. public buttons will be ready next week. as well as public thumb sticks. Dpads are available now.
notes :
1 vibrator necessary.
2 mass production is very difficult atm due to different pour ratios. thinner parts need more hardener. To much hardener in larger parts makes so bubbles get stuck. So high detail thin parts like the l2/r2 need to be pour by themselves . analog bottoms are also on this pour.
3 analog bottoms are being extraordinarily difficult. I've made the mistake of pouring the same ratio as buttons twice now. part to soft and not complete. Air keeps getting trapped in the round part. This part is so thin, that if any air bubbles get stuck in there the part is unusable.
mass production molds are started for ps3 buttons and dpad. triggers will not be mass produced and will be special order only.

whitetop · « **Reply #42 on:** May 20, 2011, 01:09:47 PM »

if you get them good as you want and are ready to sell (bubbles or not) i'll buy 2 sets depending on price but ill sure buy one off you

1TONpete · « **Reply #43 on:** May 20, 2011, 02:13:18 PM »

Yeah the bubble problem is solved now, but before certain molds if they got a bubble in them the pour would be ruined because of how thin the material was.

Crumbz · « **Reply #44 on:** May 22, 2011, 11:32:12 PM »

Should think about adding this stuff to the AM store. But thats just a thought.

whitetop · « **Reply #45 on:** May 23, 2011, 05:06:39 AM »

Quote from: CreativeMindMedias on May 22, 2011, 11:32:12 PM

Should think about adding this stuff to the AM store. But thats just a thought.

think he mite do but he's trying to sort the bubbles out first as i dont think many would go for them

1TONpete · « **Reply #46 on:** May 23, 2011, 05:43:03 AM »

I was going to talk to admins about that once i had complete sets in production. Last piece of the puzzle still needs to be proved . The bottoms of the analogs are giving me trouble. The weather has been bad and I lost a friend in a motor cycle accident the other day so I have not been working. I will post results soon. White I'll get back to you when I get my head straight.

whitetop · « **Reply #47 on:** May 23, 2011, 05:49:18 AM »

hey mate take your time life comes first i can wait and im sure others can sorry to hear about the loss of a friend mate sort stuff out.

i was wondering why you been on but not said anything hope your ok man

802Chives · « **Reply #48 on:** May 23, 2011, 11:00:20 AM »

diggin the skull thumbsticks and xbox button i could see those being very popular. nice work sofar cant wait to see more

1TONpete · « **Reply #49 on:** May 24, 2011, 09:09:30 PM »

OK I think I need to put this idle mind and hands back to work on something engaging , so weather permitting Ill be pouring, when the weather wont cooperate Ill be working on final assembly of m16 sharpshooter. So keep an eye for updates.

whitetop · « **Reply #50 on:** May 25, 2011, 02:06:24 PM »

den them update pictures are great mate i can see your hard work is paying off.

1TONpete · « **Reply #51 on:** May 26, 2011, 08:24:06 AM »

Did a full pour today. fingers crossed

tempermodz · « **Reply #52 on:** May 26, 2011, 08:35:36 AM »

Nice! !! Did you glued on the leds by the joysticks mechanism? Also where did you get that button to
turn the leds on/off I been looking all over the place, cause its not a normal tactical button right.
Do you have a tutorial of how to do the drop shot? Or is it in a pic chip mod?

News:

Author Topic: Clear Analog LED Mod (Read 13161 times)