« previous next »
Pages: [1]   Go Down

Author Topic: ps3 rf trace problem  (Read 5054 times)

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
ps3 rf trace problem
« on: May 28, 2011, 03:38:56 PM »
i was installing bmuv2 on my ps3 controller and the tp18 point ripped out of the board, if you were to look at the to18 point you would see brown, how can i fix this, can i use an alternate point, what is the tp18 used for(it is the r1), i have the ps3 controller that looks like this(it is one of the first sixaxis controller, it does not have dual shock 3):
https://www.acidmods.com/forum/index.php?action=dlattach;topic=37745.0;attach=2379;image
Logged

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: ps3 rf trace problem
« Reply #1 on: May 28, 2011, 03:57:12 PM »
hi please keep in the right section

ok if its come off im not sure if it can be fixed but don't take my word for it
Logged
come to the rite place if you kiss admins as they promote you to admin.

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: ps3 rf trace problem
« Reply #2 on: May 28, 2011, 03:59:18 PM »
sorry for not putting it in the right section
Logged

Offline nEoVaLoR

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: ps3 rf trace problem
« Reply #3 on: May 28, 2011, 04:51:24 PM »
just follow the trace and solder whatever component it leads to.
Logged

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: ps3 rf trace problem
« Reply #4 on: May 28, 2011, 05:18:09 PM »
idk which one leads to it
Logged

Offline nEoVaLoR

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: ps3 rf trace problem
« Reply #5 on: May 28, 2011, 07:47:08 PM »
the trace is a copper line... if your vision sucks use a magnifying glass.
Logged

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: ps3 rf trace problem
« Reply #6 on: May 28, 2011, 07:48:44 PM »
ya i know that, my vision is really good, it is just that i can't really see anything going into the point
Logged

Offline nEoVaLoR

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: ps3 rf trace problem
« Reply #7 on: May 28, 2011, 07:52:28 PM »
i don't have a sixaxis so I can't find out. don't know what to tell ya.
Logged

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: ps3 rf trace problem
« Reply #8 on: May 28, 2011, 07:54:00 PM »
thanks for trying to help, it doesn't really matter i don't play on ps3 that much
Logged

Offline nEoVaLoR

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: ps3 rf trace problem
« Reply #9 on: May 28, 2011, 07:57:01 PM »
haha i didn't help at all really

i haven't been playing much either, but since psn is back up its about time to
Logged

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: ps3 rf trace problem
« Reply #10 on: May 28, 2011, 08:50:04 PM »
First of all , I am not sure this can be fixed, and if you took the tp18 out, you might have lost one side of the controller. I did this once and lost the use of the right side of the controller, i tried to fix it and didnt have any luck, thought about going back and trying it again but just havent had the time, all you can do is search for the wireing schematic on the controller, they are out there just have to find them. just something to think about when you try to repair this.

good luck. If I find any info I will post back .
Logged

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: ps3 rf trace problem
« Reply #11 on: May 28, 2011, 08:51:03 PM »
ok thanks
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: ps3 rf trace problem
« Reply #12 on: May 29, 2011, 05:41:59 AM »
If you pulled tp18 throw it away.

why are you installing a xbox code in a ps3 anyway? it dont work like that
Logged

Offline manwinder

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: ps3 rf trace problem
« Reply #13 on: May 29, 2011, 06:47:38 AM »
i forget what the code was it was like bmuv2 or bmuv1, but it is for ps3, i will see if the controller still works, if not, i will just sell it
Logged

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: ps3 rf trace problem
« Reply #14 on: May 30, 2011, 03:57:19 AM »
From most of the scans I have seen, the TP18 and TP17 points (both COM lines) are not part of the main trace. The main path of the trace is on the backside of the PCB and an extra via brings the COM to the top side only for the test point. Lifting the pad should not have ruined the controller, but you will not want to install RF without it.
Logged
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline nEoVaLoR

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: ps3 rf trace problem
« Reply #15 on: May 31, 2011, 06:59:04 AM »
Quote from: Hazer on May 30, 2011, 03:57:19 AM
From most of the scans I have seen, the TP18 and TP17 points (both COM lines) are not part of the main trace. The main path of the trace is on the backside of the PCB and an extra via brings the COM to the top side only for the test point. Lifting the pad should not have ruined the controller, but you will not want to install RF without it.
^^^ this
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal