Author Topic: flex rapid fire help  (Read 1213 times)

Offline snowcolt17

  • Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
flex rapid fire help
« on: September 04, 2011, 02:30:37 PM »
i need a little advice on what to do.. i installed it. i didnt have any 30awg laying around so i used 24.. it works good. i get 2 modes. and player 4 doesnt work...

http://youtu.be/HauV1XncIs0


Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: flex rapid fire help
« Reply #1 on: September 04, 2011, 02:35:15 PM »
You might have lifted the led off the pad when you soldered the wire to it.

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline snowcolt17

  • Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: flex rapid fire help
« Reply #2 on: September 04, 2011, 02:42:28 PM »
led is burnt a tad bit. but here is the best pic i could get with my sh*tty webcam


Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: flex rapid fire help
« Reply #3 on: September 04, 2011, 02:43:53 PM »
looks lifted off the pad to me, and no solder  on the pad from what i can tell hard to really see it  .


EDIT: try and add some solder to the led, might just  be  missing  the trace, it lights up when, you press the tac button just not lighting when you turn the controller on. your on the positive side of the led, when  you solder the wire to  it  other side is grounded
« Last Edit: September 04, 2011, 02:46:01 PM by Rodent »

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline snowcolt17

  • Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: flex rapid fire help
« Reply #4 on: September 04, 2011, 02:45:57 PM »
i know my cam sucks. i will try to add a bit more solder.

solved one thing since rodent was right. lmao.. it wasnt attached to the pad. it was powering on because it was getting power when i activated the mode.. .facepalm. 
« Last Edit: September 04, 2011, 03:15:00 PM by snowcolt17 »


Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: flex rapid fire help
« Reply #5 on: September 04, 2011, 03:18:52 PM »
thanks , just doing my job...lol glad you got it fixed   :tup:

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline snowcolt17

  • Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: flex rapid fire help
« Reply #6 on: September 15, 2011, 02:25:18 AM »
so i have tried multiple times to build a programmer...

and the last one seems to work.
when reading, verifying, or writing it lights up.

but i still get a error. but i think thats just a verifying error. here is the error and the log from it




 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal