Author Topic: Llama Acrylic Bevel Window Case Cuts  (Read 1358 times)

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Llama Acrylic Bevel Window Case Cuts
« on: October 06, 2011, 07:44:52 AM »
I was wondering if any would happen to know how I could do this because this is exactly what I have always wanted out of a case cut. Link

In case the page in the link changes, here is what it has as of today and what I'm looking at.
[spoiler]These are screenshots

[/spoiler]

Offline snowcolt17

  • Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: Llama Acrylic Bevel Window Case Cuts
« Reply #1 on: October 06, 2011, 11:55:05 AM »
thought about doing a cool case mod.. still might.. but hand etching something into plexiglass and placing leds around the edges so it will shine through and hit the etching.. it says they used a cnc.. idk what kind of material it is.

[spoiler]

[/spoiler]
« Last Edit: October 06, 2011, 12:01:19 PM by snowcolt17 »


Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Llama Acrylic Bevel Window Case Cuts
« Reply #2 on: October 06, 2011, 01:02:58 PM »
with hardcore skills and a router... or a CNC router

Offline snowcolt17

  • Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: Llama Acrylic Bevel Window Case Cuts
« Reply #3 on: October 06, 2011, 01:21:24 PM »
yup. cnc. if you know anyone that has one. or anyone in school. be helpful


Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: Llama Acrylic Bevel Window Case Cuts
« Reply #4 on: October 06, 2011, 01:51:44 PM »
CNC is best, but you can still do it by hand using carbon paper. Thats how I did my Wii.
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline snowcolt17

  • Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: Llama Acrylic Bevel Window Case Cuts
« Reply #5 on: October 06, 2011, 03:38:45 PM »
CNC is best, but you can still do it by hand using carbon paper. Thats how I did my Wii.

my friend runs a laser cnc at school.. lol. if you dont have access to a cnc. i would use a dremel.


Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: Llama Acrylic Bevel Window Case Cuts
« Reply #6 on: October 07, 2011, 08:28:54 AM »
I figured I could use a router. As long as its a simple design it shouldnt be too hard I guess

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal