Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
I own a PS360 controller the l3/r3 are hard to push down
Hi Melissa, wow you been thru alot, looks like your still going for everything possible in life which is good you can never give up. Welcome to Acidmods, as you can see there are some very helpfull members here. I know these people have helped others. Here is a link from Hazer (Awesome Modder/Very careing person also) check out his link https://www.acidmods.com/forum/index.php/topic,39591.msg296985.html#msg296985
It is very difficult to make a 360 controller fit inside a PS3 shell I would say it is pretty much impossible to do it with a wired controller. But Perhaps we could use a stock PS3 controller connected to an arduino via bluetooth then have the arduino connected to a 360 controller and pass through the button states of the PS3 controller to the 360 board?
Thank you Rodent!That thread is awesome!
Moosh89: My wheelchair lift on my van looks like the Powerloader, everytime I get out I feel like shouting "Get away from her, You !"
I don't care if this sounds lame, but this made me cry! hahaha .... This is just way too great. Thank you Hazer, and anyone else involved... I feel like I've just witnessed a miracle or something!
Thank you for the compliment Melissa. It was a privilege to make that controller for Chuck. I am hoping we can help you with your needs as well. I really like the fact you plan to do mods on your own.I dont know if trying to do a 360 controller in a PS3 shell is the best way to go. As you have read already, most attempts to date are extreme and ended up with something missing from the controller (wireless for instance).I do have a suggestion for an alternative: The Razor Onza http://www.razerzone.com/minisite/onza for X360 is lighter, has tactile ABYX that are easier to push, adjustable tension sticks, and already has the built-in extra bumper buttons that natively can be assigned any button on the controller. The CONs would be that it is still a X360 design (wider and stick placement in X360 style instead of PS3 style) and is a wired controller (but has 15 feet of cord). What I am thinking is if this controller is already half of the requiremetns for you to play on the X360, maybe some of us can figure the rest out: For instance, install those extra buttons to relocate the R3/L3 clicks to the side of the controller and use the extra bumpers to assign the R2/L2 triggers. We can also look at possibly doing a reconfigure of the stick and making it the same as the PS3 layout (swapping the DPAD and left stick). I can also look at doing a full remap of the ONZA using the same technique as Chucks controller.Even if the ONZA is not good enough to start with, I would recommend we look for a 3rd party controller to start with instead of trying to hack up the official ones to fit.For instance the MLB from mad catz http://www.madcatz.com/mlg/360_controller.htm. I just noticed that one is wired also, but it already has the relocatable sticks. I could have sworn I saw a 3rd party PS3 style wireless (had a USB dongle) that worked on both the PS3 and the X360. I will have to dig to find it.If the ONZA might be a possibility, let me know. I have one I could send your way to 'try out' for feel/wieght. If its not that bad to begin with, we can arrange to fix it so it fits your style.
You sound Cool Girl, One BADASS chick nice to meet you.
Thanks everyone!hahaha, Thank you! I'm a big fan of the Aliens movies!, kinda nerdy hey? haha
I think you are wanting a SPDT (single pole double throw) momentary rocker switch or DPDT (double pole double throw) momentary rocker switch.
Thanks, I couldn't find any suitable on ebay, so I'm trying Digikey.ca. I'm looking for "Momentary-Off-Momentary", right?I did find one of their "cheaper" ones thats about 15mm x 12mm (cut out), its $5.26 for 1, plus the standard $8.00 shipping:http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=106534837&uq=634556679552695288Does anyone know where I can find something similar, for a little cheaper? $13.26 for 1 little switch is kind of, ridiculous hahahabut if we can't find anything else, I guess I'll get it from there haha
you link told me part not found, I might have something but want to know exactly what you want. and maybe i can find it in the US cheaper then digi-key.
doesnt have to be momentary-off-momentary. if i know correctly. momentary only works when you push them. so unloess its pushed it wont wrok. could be wrong.