Author Topic: Razor nub install prototype video (Read 50407 times)

F00 f00 · « **on:** May 03, 2007, 02:58:17 PM »

Well I've had an awful lot of people asking me about this one, so I thought I'd put up a short clip of what I have now. This is still very much the testing faze and not full functional yet. But we have made quite alot of progress an discovered enough to be able to say that this is something that will happen in the very near future.

Full props go to cyberpyrot an Neubit (where you at man?), without them this would not have been possible.

Any way enough reading hit the vid

lethal_b · « **Reply #1 on:** May 03, 2007, 03:05:49 PM »

dam that looks sexy cant wait to get one and i love that game ghost in the shell

SmoQ · « **Reply #2 on:** May 03, 2007, 03:08:07 PM »

Looks sweet

Good job

looks like new PSP with 2 original analogs

[HoP] · « **Reply #3 on:** May 03, 2007, 03:14:06 PM »

interesting that you say its a work in progress... was there problems?

BruceLee · « **Reply #4 on:** May 03, 2007, 03:16:13 PM »

Now that's what the PSP should have been like in the first place. Good job!

wrcsti · « **Reply #5 on:** May 03, 2007, 03:18:01 PM »

damn that looks sick as heck, i jut wanna order the stuff for it now, but im unsure of when itll come out, so ill wait

Takahashi · « **Reply #6 on:** May 03, 2007, 03:20:28 PM »

Tight stuff, definitely gonna b a big hit when fully released to the public.

wrcsti · « **Reply #7 on:** May 03, 2007, 03:39:33 PM »

ill do a full review when i get mine, whenever that is ill install that same day if i have the parts, and rview the very next day on how it feels, thisll help in call of duty

devin27 · « **Reply #8 on:** May 03, 2007, 03:58:09 PM »

it looks so...clean so....NATURAL
NIIIIICCCCEEEE

:icon30:

robin1989 · « **Reply #9 on:** May 03, 2007, 04:15:05 PM »

that looks really nice - it seems very responive as well - i hope you all get the kinks sorted out and that neubit stops bieng awol

Takahashi · « **Reply #10 on:** May 03, 2007, 04:23:37 PM »

There is NO INFORMATION AVAILABLE on how much this product will be because they havent sent it out yet to see how much it would cost to get manufactured. Everything follows after there with NO INFORMATION NONE

bncplix · « **Reply #11 on:** May 03, 2007, 04:46:09 PM »

sweet, will be doing this for sure

replicashooter · « **Reply #12 on:** May 03, 2007, 05:03:35 PM »

Props to Pyro, Neu and F00 - You've done what Sony couldn't.

[HoP] · « **Reply #13 on:** May 03, 2007, 06:31:23 PM »

once i talk to cyberpyrot and neubit i think that the modders will be happy with the result. more then likely it would be cheaper than people think!

B D09 · « **Reply #14 on:** May 03, 2007, 10:33:40 PM »

cant wait for it to be released, i want a second nub that looks stock

Ilzwalrus · « **Reply #15 on:** May 03, 2007, 11:27:34 PM »

Looks awesome.
But I gotta ask, like [Hop], why is it a work in progress? It looks pretty much fully functional.

Optix · « **Reply #16 on:** May 04, 2007, 12:23:19 AM »

That SIR. Looks frickign awesome. Gonna get me one as soon as its released. Props to f00/cyber/neubit.

btw, Where is neubit anyway? Is he hiding for cyber? (Heard rumors that cyber was showing his new night-dress on the webcam

)

dedafmonteur · « **Reply #17 on:** May 04, 2007, 01:31:22 AM »

no, in china they have vacation atm, i think he will be back soon, and otherwise it was the night-dress lol!

LIAMMR · « **Reply #18 on:** May 04, 2007, 02:40:04 AM »

Looks sweet FOO f00!

I want this on my PSP so bad!

(LOL at the waving in the reflection part)

Wicked Insider · « **Reply #19 on:** May 04, 2007, 03:24:27 AM »

Quote from: BruceLee on May 03, 2007, 03:16:13 PM

Now that's what the PSP should have been like in the first place. Good job!

I'm with Bruce Lee on this one, very sweet for sure.
Very clean, looks factory but I'm wondering whats
not fully functional about it?

Can't wait for it's release.

DubbleDutch · « **Reply #20 on:** May 04, 2007, 04:42:53 AM »

well done

but did i see u removed the yellow charge thing :P (don't know the name of it)

and do we also have to remove it ? when we install the razor nub ?

purechinoy · « **Reply #21 on:** May 04, 2007, 06:21:31 AM »

it looks good. i'm just wondering what still needs to be worked on? since i'm planning on getting some work done...it would be sweet if i could get this new version.

SYSTEM aka (Cyberpyrot) · « **Reply #22 on:** May 04, 2007, 06:53:55 AM »

Quote from: purechinoy on May 04, 2007, 06:21:31 AM

it looks good. i'm just wondering what still needs to be worked on? since i'm planning on getting some work done...it would be sweet if i could get this new version.

Ok for all of you wondering, We are waiting on Neubit to ship us the proto type boards. The reason we are saying it is a work in progress is because we hand made the circuit boards with plastic, conductive tape, conductive pen and wire because the proto type is very fragile it degrades with every test meaning the fuctionality gets worse everytime we use it. When and If Neubit sends us the proto PCB's we would be able to send them out to be mass produced.. We cannot send the bluprints to the PCB manufacture because it is a one time shot meaning they won't make just one board for use to test to make sure they got the dimentions spot on. so if we sent the PCB manufacturers an actual PCB from Neubit there will be no margin for error. Now that you know whats going on maybe you can understand why it is taking so long.

Vaughan14 · « **Reply #23 on:** May 04, 2007, 07:08:18 AM »

Brings a tear to my eye!

Ima gonna be the first on the waiting list.

Edit: so now I know why it's taking so long to test. Good luck.

Ilzwalrus · « **Reply #24 on:** May 04, 2007, 07:08:44 AM »

Ah, right..

I like this: "we hand made the circuit boards with plastic, conductive tape, conductive pen and wire"
Old skool.

Neubit, please come back. We really miss you.

purechinoy · « **Reply #25 on:** May 04, 2007, 07:35:57 AM »

Quote from: cyberpyrot on May 04, 2007, 06:53:55 AM

Ok for all of you wondering, We are waiting on Neubit to ship us the proto type boards. The reason we are saying it is a work in progress is because we hand made the circuit boards with plastic, conductive tape, conductive pen and wire because the proto type is very fragile it degrades with every test meaning the fuctionality gets worse everytime we use it. When and If Neubit sends us the proto PCB's we would be able to send them out to be mass produced.. We cannot send the bluprints to the PCB manufacture because it is a one time shot meaning they won't make just one board for use to test to make sure they got the dimentions spot on. so if we sent the PCB manufacturers an actual PCB from Neubit there will be no margin for error. Now that you know whats going on maybe you can understand why it is taking so long.

i really hope that Neubit sends those to you soon. i'm planning on getting my psp worked on within the next couple of weeks and this mod is gonna be one that i want.

Neubit....for some incentive i'll pay for the shipping

MattZani · « **Reply #26 on:** May 04, 2007, 07:59:16 AM »

that looks soo sweet, completely what the PSP should have looked like!

Can't wait for the final design, would it help if you knew how many you were definitely going to sell?

SYSTEM aka (Cyberpyrot) · « **Reply #27 on:** May 04, 2007, 08:01:06 AM »

Quote from: MattZani on May 04, 2007, 07:59:16 AM

that looks soo sweet, completely what the PSP should have looked like!

Can't wait for the final design, would it help if you knew how many you were definitely going to sell?

yes as we would know how many to make

diabloNL · « **Reply #28 on:** May 04, 2007, 08:30:00 AM »

Looks great! I want one for sure! :icon30:

purechinoy · « **Reply #29 on:** May 04, 2007, 09:22:26 AM »

right now i'm just waiting for a final price quote from F00 F00 for work on my PSP.

FOR SURE i want this done!!! i'm gonna get the second nub but I WANT THIS UPDATED VERSION!!!

News:

Author Topic: Razor nub install prototype video (Read 50407 times)