Author Topic: GT5 themed PS3 (Read 29439 times)

wetfusion · « **Reply #30 on:** December 09, 2011, 11:37:59 AM »

just tested out the oven. and here are the result.
this is the pic before

this is after some paintwork. its done on a hotwheels, which is roughly the length of ur pinky finger.

Rodent · « **Reply #31 on:** December 09, 2011, 11:45:09 AM »

I though this was a work log on a PS3 GT 5 theme i dont see any modding getting done on this just a bunch of pics that has nothing to do with what you first posted

robin1989 · « **Reply #32 on:** December 09, 2011, 11:49:37 AM »

rodent i think he is practicing airbrushing on the hotweels cars

very nice - how detailed can you go - could you paint on the headlights and door handles

Rodent · « **Reply #33 on:** December 09, 2011, 11:52:53 AM »

Quote from: Mactastic Mendez on December 09, 2011, 11:49:37 AM

rodent i think he is practicing airbrushing on the hotweels cars

very nice - how detailed can you go - could you paint on the headlights and door handles

that would make sence then... yea more detail would make it that much better also like the door handles headlights, white letter tires

wetfusion · « **Reply #34 on:** December 09, 2011, 12:19:11 PM »

Quote from: Rodent on December 09, 2011, 11:45:09 AM

I though this was a work log on a PS3 GT 5 theme i dont see any modding getting done on this just a bunch of pics that has nothing to do with what you first posted

in the end you can see how this will relate to the end result of doing this ps3 mods.

as you can see bro the paintwork that was done is a whole new level compared what you, or any other modder here have done. im not using cheap spray cans, instead im using a high quality 2K paint. and you can see that is the red that i will be using for the PS3. its starbright red met.

and as we speak now bro, im doing another hotwheels with not just a simple paint. im talking about doing a single letter which is in the size of an ant like in this picture

there's a limit on how small you can go with an airbrush, and i just learned how to get even smaller. you just have to see it next week.

doing a cut in the case, spraying a base coat and throw in some led is easy.

but doing a detailed design like my previous work

its in a different level. things need to be try out and perfected first before its being done on the real thing.

and trust me dont worry too much about if this thread will end with me not finishing it or not. i have been around since 2008. done countless of mods here. sure my post here is not as much as yours, but i can assure you i have been posting more mods here than you

.

Rodent · « **Reply #35 on:** December 09, 2011, 12:34:30 PM »

we shall see the results!!!!!

wetfusion · « **Reply #36 on:** December 14, 2011, 11:42:40 AM »

here you go rodent

here are the small details that i mention

comparing to a rice.

before this, whenever i do a paint job on a psp or controller, some icon like the memory card icon can't be painted back because it was too small. however, that wont be a problem now

so let's start

Rodent · « **Reply #37 on:** December 14, 2011, 04:17:53 PM »

Wetfusion i always liked your work , as for painting yea you done some cool stuff, and I am sure that the PS3 will come out nice, but as for small detail on the cars I did that stuff when i was in the ages of 5 to 9... nice job, keep up the good work, just hope to see this finished like your designe started.

wetfusion · « **Reply #38 on:** December 14, 2011, 05:13:07 PM »

Quote from: Rodent on December 14, 2011, 04:17:53 PM

Wetfusion i always liked your work , as for painting yea you done some cool stuff, and I am sure that the PS3 will come out nice, but as for small detail on the cars I did that stuff when i was in the ages of 5 to 9... nice job, keep up the good work, just hope to see this finished like your designe started.

really? you have access to lacquer at the age of 5? can you explain the process?

nEoVaLoR · « **Reply #39 on:** December 14, 2011, 06:14:28 PM »

Quote from: wetfusion on December 09, 2011, 12:19:11 PM

in the end you can see how this will relate to the end result of doing this ps3 mods.

as you can see bro the paintwork that was done is a whole new level compared what you, or any other modder here have done. im not using cheap spray cans, instead im using a high quality 2K paint. and you can see that is the red that i will be using for the PS3. its starbright red met.

and as we speak now bro, im doing another hotwheels with not just a simple paint. im talking about doing a single letter which is in the size of an ant like in this picture

there's a limit on how small you can go with an airbrush, and i just learned how to get even smaller. you just have to see it next week.

doing a cut in the case, spraying a base coat and throw in some led is easy.

but doing a detailed design like my previous work

its in a different level. things need to be try out and perfected first before its being done on the real thing.

and trust me dont worry too much about if this thread will end with me not finishing it or not. i have been around since 2008. done countless of mods here. sure my post here is not as much as yours, but i can assure you i have been posting more mods here than you .

I personally think it has to do with his mod. He's practicing for the final project. And showing never, ever hurts. I actually enjoyed the process of seeing him paint the cars, I even went to his blog to see more in depth about it.

Wetfusion has been my friend since I first joined the site, and modding is nothing new for him lol. He always get's the job done. He's the last person to worry about completing a mod.

However I don't think personal attacks are necessary... We're all a family here, A tad bit disfunctional lol, but still a family

let's get along boys

Rodent · « **Reply #40 on:** December 14, 2011, 07:05:47 PM »

Quote from: wetfusion on December 14, 2011, 05:13:07 PM

really? you have access to lacquer at the age of 5? can you explain the process?

Yes that is all we had was Laguer when i was 5 years old and enamel paints, I been around cars since i was 3 so wasnt nothing special about it... lol and now days you have to be 18 to buy Rattle cans ...lol i was buying rattle cans at age 8... man how times have changed.

Nice work cant wait to see this finished now it should be perfect

hyper999 · « **Reply #41 on:** December 15, 2011, 08:30:15 AM »

are you telling me you painted those logos with an airbrush?

wetfusion · « **Reply #42 on:** December 16, 2011, 12:29:37 AM »

Quote from: hyper999 on December 15, 2011, 08:30:15 AM

are you telling me you painted those logos with an airbrush?

thanks for the interest hyper999. its a new technique. i will share it when i finish the work. or better maybe rodent can explain a little bit about the technique. i did a little bit more of training before doing it on a controller. being asian, kamen rider is quite popular, so i did this for my friend who is a fan of the series.

i will finish the controller 1st starting tonight.

hyper999 · « **Reply #43 on:** December 16, 2011, 08:37:22 AM »

Quote from: wetfusion on December 16, 2011, 12:29:37 AM

thanks for the interest hyper999. its a new technique. i will share it when i finish the work.

Ok, so not with an airbrush then, good.

If I had to guess at how I would say you did it with something like those little decals you get with Airfix sets, the ones that come on a sheet, then you wet them, pick them off the sheet with tweezers and place them on the model.

Rodent · « **Reply #44 on:** December 16, 2011, 08:48:07 AM »

Quote from: hyper999 on December 16, 2011, 08:37:22 AM

Ok, so not with an airbrush then, good.

If I had to guess at how I would say you did it with something like those little decals you get with Airfix sets, the ones that come on a sheet, then you wet them, pick them off the sheet with tweezers and place them on the model.

thats how they come Hyper999 in the model kits ...lol ;p

zbblanton · « **Reply #45 on:** December 16, 2011, 12:10:30 PM »

It couldn't have been decals, how the hell would he have the custom logos then? He said it was a new technique, decals is not a very new technique.

wetfusion · « **Reply #46 on:** December 17, 2011, 01:46:24 PM »

Sammy · « **Reply #47 on:** December 17, 2011, 02:04:07 PM »

LOOKIN AWESOME WETFUSION!!! keep up the good work!

wetfusion · « **Reply #48 on:** December 17, 2011, 02:05:21 PM »

Quote from: Sammy on December 17, 2011, 02:04:07 PM

LOOKIN AWESOME WETFUSION!!! keep up the good work!

i dunno dude... it looks weird

whitetop · « **Reply #49 on:** December 17, 2011, 02:55:51 PM »

its looking really nice man cannot wait for the final parts

PsychoticWolf · « **Reply #50 on:** December 17, 2011, 04:16:58 PM »

Dude whos PS3 Controller is that? The before pics make me want to throw up. I always clean my controllers. that is just nasty lol. But awesome work with the tiny details man.

hyper999 · « **Reply #51 on:** December 17, 2011, 04:52:29 PM »

Quote from: zbblanton on December 16, 2011, 12:10:30 PM

It couldn't have been decals, how the hell would he have the custom logos then? He said it was a new technique, decals is not a very new technique.

10 seconds on google and I now know you can make custom decals quite easily. http://reviews.ebay.co.uk/Transfer-Paper-Decal-paper-Quick-Tips-To-Using-It?ugid=10000000003583358

And as far as I'm concerned using decals like this is a new technique when it comes to the console modding world, have you ever seen a case mod that uses them? cos I certainly haven't.

But hey ho, I guess we we'll just have to wait and see :P

wetfusion · « **Reply #52 on:** December 17, 2011, 05:17:40 PM »

Quote from: hyper999 on December 17, 2011, 04:52:29 PM

10 seconds on google and I now know you can make custom decals quite easily. http://reviews.ebay.co.uk/Transfer-Paper-Decal-paper-Quick-Tips-To-Using-It?ugid=10000000003583358

And as far as I'm concerned using decals like this is a new technique when it comes to the console modding world, have you ever seen a case mod that uses them? cos I certainly haven't.

But hey ho, I guess we we'll just have to wait and see :P

i guess you get that 80% right bro :P

izzit ez? ahh man for me i cant say so, i have been try and errors on this stuff a lot of times. here's atip. use laser inkjet printers that have high DPI.

the other 20%? lies on how to clear coat it to make it look like its not a sticker.

Rodent · « **Reply #53 on:** December 17, 2011, 05:25:08 PM »

Quote from: wetfusion on December 17, 2011, 05:17:40 PM

i guess you get that 80% right bro :P

izzit ez? ahh man for me i cant say so, i have been try and errors on this stuff a lot of times. here's atip. use laser inkjet printers that have high DPI.

the other 20%? lies on how to clear coat it to make it look like its not a sticker.

have to feather the clear coat to the decal takes alot of time and patients, If you look at my Honda xbox i did its very quite easy todo, I was trying some new stuff that 1TONpete and I both tried , Next one I do with decals will come out alot better , hard to lay decals and clear over them not knowing if your printed decals , will cahnge color or runn when applying clear coat so always test on something before trying to do your finished product

hyper999 · « **Reply #54 on:** December 17, 2011, 05:36:49 PM »

Quote from: wetfusion on December 17, 2011, 05:17:40 PM

i guess you get that 80% right bro :P

YESS

I assumed the fact that you clear coated it was obvious but hey I'll happily take 80% :P

zbblanton · « **Reply #55 on:** December 17, 2011, 05:40:50 PM »

Quote from: hyper999 on December 17, 2011, 04:52:29 PM

10 seconds on google and I now know you can make custom decals quite easily. http://reviews.ebay.co.uk/Transfer-Paper-Decal-paper-Quick-Tips-To-Using-It?ugid=10000000003583358

And as far as I'm concerned using decals like this is a new technique when it comes to the console modding world, have you ever seen a case mod that uses them? cos I certainly haven't.

But hey ho, I guess we we'll just have to wait and see :P

10 seconds on google and I found decals on consoles.

He said it was a new technique and as far as I'm concerned using decals isn't a new technique when it comes to the console modding world.

hyper999 · « **Reply #56 on:** December 17, 2011, 05:45:18 PM »

Quote from: zbblanton on December 17, 2011, 05:40:50 PM

10 seconds on google and I found decals on consoles.

He said it was a new technique and as far as I'm concerned using decals isn't a new technique when it comes to the console modding world.

Link me to a console mod where this kind of decals were used.

wetfusion · « **Reply #57 on:** December 17, 2011, 05:51:05 PM »

a new technique that i learn. this, is just the controllers. be patient.

normal decals yes, but specifically this type of decal it would be a few.

zbblanton · « **Reply #58 on:** December 17, 2011, 05:57:21 PM »

Hell if I know lol. I don't know what kind of decals he used. And I just kicked in the ass, I misread rodents post. I thought he was saying decals in general.

But anyway keep up the good work man. Still waiting on this new

on your blog lol.

wetfusion · « **Reply #59 on:** December 20, 2011, 02:27:53 AM »

finish clear coat the top part.
*i think*... it look okay...

proceed bottom part tomorrow

News:

Author Topic: GT5 themed PS3 (Read 29439 times)