Broken connector to backlight ( damaged pads )

[macsurf]

Hello

I got console with damaged solder pads on mainboard, the pads are the backlight connector.
I need to find alternative points to solder these connector in place damaged pads.
Please take a look at photo of mainboard with damaged solder pads. Mainboard is TA-086. Thank you for help and I am sorry for my poor english

[Luigus]

I'm Guessing here, I haven't worked on psp's for a while now. It won't hurt to give it a try.



EDIT: The copper lettering on the picture (eg. CN4902) are ground

[macsurf]

Thanks for your help
So I marked ground point on the photo I hope that now everything is good.

[Luigus]

As long as that two points is ground, it should work.

[COREGAMER]

OR if that does not work you can mod the backlight and but in some white 0603's in there. I have done it once and it worked pretty good

[snowcolt17]

this is a pic from the psp phat raw scans. the best pic i can find. thanks to robin. but it looks different from yours