Slim Lite-On 0225 wont load any discs

[Luigus]

Hey guys, i got a slim in today, had a WINBOND chip.

So it kamikaze'd it and i got the SPI unlock status. I flashed it following the JF tutorial (they use a unlocked pcb btw) and i wrote the F/W and everything looked right.
I put the drive back into the slim, and tested it with a Black Ops II backup and a Amped III original, the xbox just kept sayin Open Tray.
So i thought it was a bad flash. Re unlocked the drive with alcohol swabs, rewrote the firmware. tested again, and still doesn't work.

Heres the log on the second try:


[spoiler]

Code: [Select]


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.92 Beta (304)

Session Started Wed Nov 14 10:51:05 2012



This is a 32 bit process running on 4 x 32 bit CPUs

X360USB PRO detected, Version 0.18



portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 3 I/O Ports.

Found 1 Com Ports.

Found 9 windows drives C: D: E: F: J: K: L: M: N:

Found 2 CD/DVD drives E: F:



New CD/DVD detected.

Found drive C: - Hard Drive.

Found drive D: - Hard Drive.

Found drive E: - CD/DVD.

Found drive F: - CD/DVD.

Found drive G: - CD/DVD.

Found drive J: - Hard Drive.

Found drive K: - Removable.

Found drive L: - Removable.

Found drive M: - Removable.

Found drive N: - Removable.

No Hitachi drives were found!

Sending Vendor Intro to port 0x0000

Status 0x51

Re-sending Vendor Intro:

.

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x01

Manufacturer ID: 0x1

Device ID: 0x1

Flash Name:  Unknown type

Flash Size:  n/a

Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xEF

Device ID: 0x11

Flash Name:  Winbond/NEX(W25P20/NX25P20)

Flash Size:  262144 bytes

Loading firmware file C:\Users\Pa & Ma Wessels\Desktop\Louis Stuff\JungleFlasher v0.1.92 Beta (304)\Drive previous Firmwares\Aidan (Slim LiteOn 0225)\Dummy.bin

MD5 hash:  e6bff76bbd471061368571767c4039a4

Inquiry string found

Identify string found

Drive key @ 0xA030 97EAE6***************D9CB5ED0

Firmware Osig: [PLDS    DG-16D4S        0225]

Firmware is:  SlimKey Extract                 

Loading firmware file C:\Users\Pa & Ma Wessels\Desktop\Louis Stuff\JungleFlasher v0.1.92 Beta (304)\Drive previous Firmwares\Aidan (Slim LiteOn 0225)\Dummy.bin

MD5 hash:  e6bff76bbd471061368571767c4039a4

Inquiry string found

Identify string found

Parse Failed !



Loading firmware file C:\Users\Pa & Ma Wessels\Desktop\Louis Stuff\JungleFlasher v0.1.92 Beta (304)\Drive previous Firmwares\Aidan (Slim LiteOn 0225)\Lite-OFW.bin

MD5 hash:  ce3b53f5652827376b93c8375b879f44

Drive key @ n/a 97EAE6A9**********7A8D9CB5ED0

Firmware Osig: [PLDS    DG-16D4S        0225]

Firmware is:  Stock                           

Spoofing Target

DVD Key already matches

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target

Serial data already matches



Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name:  Unknown type

Flash Size:  n/a

Unknown flash type Write aborted !

Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name:  Unknown type

Flash Size:  n/a

Sending Vendor Outro to port 0x0000

Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name:  Unknown type

Flash Size:  n/a



Sending Spi Lock request to Port 0x0000

Lock Failed !

Spi Status: 0x00



Sending Spi Lock request to Port 0x0000

Lock Failed !

Spi Status: 0x00



Sending Spi Lock request to Port 0x0000

Lock Failed !

Spi Status: 0x00



Sending Spi Lock request to Port 0x0000

Lock Failed !

Spi Status: 0x00



Sending Spi Lock request to Port 0x0000

Lock Failed !

Spi Status: 0x00

Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name:  Unknown type

Flash Size:  n/a

Unknown flash type Read aborted !

Unknown flash type Erase aborted !

Unknown flash type Erase aborted !

Unknown flash type Erase aborted !



Drive in Vendor Mode! DVDkey files extraction aborted!



Sending Vendor Outro to port 0x0000



Drive in Vendor Mode! DVDkey files extraction aborted!



Sending Vendor Outro to port 0x0000

Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name:  Unknown type

Flash Size:  n/a



Sending Spi Lock request to Port 0x0000

Lock Failed !

Spi Status: 0x00



Drive in Vendor Mode! DVDkey files extraction aborted!





Drive in Vendor Mode! LO83info extraction aborted!



Sending Vendor Outro to port 0x0000

Sending Vendor Outro to port 0x0000

Sending Vendor Outro to port 0x0000

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A95**********7A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A95********A8D9CB5ED0

Key has been tested and verified, thanks C4eva !





0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS   

0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S       

0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............

0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 44 37 31 34 43 47 31 30 - 38 38 30 31 30 30 30 58 D714CG108801000X

0070: 55 20 20 20                                       U               



Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Manufacturer ID: 0xEF

Device ID: 0x11

Flash Name:  Winbond/NEX(W25P20/NX25P20)

Flash Size:  262144 bytes

............

Key: 97EAE6A955B8***********D9CB5ED0 is verified, Thanks C4eva



Grabbing Key sector: ................

Key Sector verified.

Grabbing Serial info: ........



Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A95***********7A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS   

0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S       

0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............

0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 44 37 31 34 43 47 31 30 - 38 38 30 31 30 30 30 58 D714CG108801000X

0070: 55 20 20 20                                       U               



0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0010: 00 00 00 00 37 44 34 31 - 47 43 30 31 38 38 31 30 ....7D41GC018810

0020: 30 30 58 30 00 55 00 00 - 00 00 00 00 00 00 32 30 00X0.U........20

0030: 35 32 20 20 20 20 4C 50 - 53 44 20 20 20 20 47 44 52    LPSD    GD

0040: 31 2D 44 36 53 34 20 20 - 20 20 20 20 20 20 00 00 1-D6S4        ..

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 00 00 00 0F 00 40 00 04 - 00 02 06 00 00 00 00 00 .....@..........

0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0080: 03 00 78 00 78 00 78 00 - 78 00 00 00 00 00 00 00 ..x.x.x.x.......

0090: 00 00 F8 00 10 02 00 00 - 02 02 00 00 60 00 40 00 ............`.@.

00A0: F8 00 10 02 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00B0: 3F 20 00 00                                       ? ..           



0000: 44 37 31 34 43 47 31 30 - 38 38 30 31 30 30 30 58 D714CG108801000X

0010: 55 20 20 20 FF FF FF FF - 31 42 31 33 30 35 35 33 U   ....1B130553

0020: 31 36 30 39 35 58 58 52 - 41 30 FF FF 53 34 50 31 16095XXRA0..S4P1

0030: 32 31 36 30 30 30 30 30 - 30 37 31 35 37 32 00 00 21600000071572..

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 41 30 FF FF ............A0..



Hashing Drive: ................



Dummy.bin file saved to Dummynewbackup.bin

Loading firmware from buffer

Inquiry string found

Identify string found

Drive key @ 0xA030 97EAE6A955B898AADCF907A8D9CB5ED0

Firmware Osig: [PLDS    DG-16D4S        0225]

Firmware is:  SlimKey Extract                 

Key database updated



Loading firmware file C:\Users\Pa & Ma Wessels\Desktop\Louis Stuff\JungleFlasher v0.1.92 Beta (304)\LT+ 3.0\Firmware\LTPlus-0225-v3.0.bin

MD5 hash:  1a38d3a2a*/*********866642c513

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS    DG-16D4S        0225]

Firmware is:  LT-Plus 3.0                     

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A955B8********A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

Sending Vendor Intro to port 0x0000

Status 0x51

Re-sending Vendor Intro:

............

Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xEF

Device ID: 0x11

Flash Name:  Winbond/NEX(W25P20/NX25P20)

Flash Size:  262144 bytes



Getting Status from port 0x0000

Spoofing Target

DVD Key copied to target

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target



Sending Vendor Intro to port 0x0000



Serial flash found with Status 0x72



Sending Device ID request to port 0x0000

Spi Status: 0x00

Manufacturer ID: 0xEF

Device ID: 0x11

Flash Name:  Winbond/NEX(W25P20/NX25P20)

Flash Size:  262144 bytes



Getting Status from port 0x0000

SPi flash found with Status 0x72



Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................

............

Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Dumped in 4587mS



Write verified OK !



Restoring sector 0x3E000.



Sending Sector Erase to Port 0x0000

Erasing: 0x3E000

Writing: 0x3E000

............

Authorised !

................

Restore verified OK !

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A955B8******907A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A955B898AADCF907A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A95*******A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A955B898AADCF907A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A955B898AADCF907A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

Sending Vendor Outro to port 0x0000

Drive is Slim Lite-On..



Key found in KeyDB at record (2 - Aidan (Slim LiteOn 0225))

Key is: 97EAE6A95************F907A8D9CB5ED0

Key has been tested and verified, thanks C4eva !

[/spoiler]

any ideas? my a POT tweak or new lazer? or a new Replacement PCB?

Thanks
`Luigus

[Rodent]

I have had this same issue at times , sometimes you need to hit the outro/ATA Reset  a couple of times also did you lock the spi before clicking the outro/ATA Reset?  sometimes you have to do that twice this also allows you to play xbl i from what i seen in a few videos. so you dont get banned. (not sure if thats true) just know from frlahsing drives that is recommended on the slims 

If so i would say its time for a new laser, the slim drive lasers seem to burn out faster then a normal drive. I tried pot adjustments but doesn't seem to last as long. for a few bucks you can get a laser pretty cheap just make sure you carefully change them . seem very cheaply made and break easy.

[Gizmo613]

I somewhat have the same problem. Except mine would say play game, as I click it, it would sign me out and go back to the dashboard. I just restart my xbox and it'll be fine. Try restarting your xbox. Also post picture of the winbond chip. You might have drilled a little too deep. Which drill did you use to drill? The 1.0mm that came with the template, if so there's a good chance you went to deep. As it is recommended to use the 1.0mm to mark the spot and use the 0.8mm to drill.

[Rodent]

just helped him out , looks like it needs a laser.. flashing went a 100 %

[Luigus]

I don't think it went too deep, i used a dremel, and took a photo of the chip and used paint to determine where to drill, used a .8mm drill point.
Rodent went through all the flashing steps with me just now, and it still doesn't work , the flashing went smooth.

So the conclusion is too buy a new laser and see where that takes me. thanks for your help

Here's a image of the hole i drilled:

[Gizmo613]

Kool. Rodent quick as always.

[cobi_vw]

very nice photos. What camera are you using?

[Luigus]

very nice photos. What camera are you using?

It's a Cannon EOS 500D

[Luigus]

So bad news guys.. i had a thread about this over at ixtreme.com, and according to them the hole i drilled for kamekaze is way too deep.

So my only sulotion is replacement pcb.. i want to order local (south africa) and the cheapest.. so i got two options the Matrix Freedom replacement or the TX replacement.. the matrix is cheaper by about 15$

so planningon buying that, just want to get someones opinion on this before i buy it

thanks

[3D0kassiah]

all you had to do was drill a little bit to get your drilling spot then finish her off with a low w solder iron simple twisting motion with the weight of the solder iron
the iron wouldve done the job just fine done it numerous times

ask rodent about the matrix pcb i sent rodent one dont remember if he told me how it worked out

[Gizmo613]

Did you already order a replacement laser? Since you already dump your original firmware, why not get another board and drill again? They are about $20-$35 shipped on evay.

[KingMike_OS]

thats is why i never drill , Use Iron

[Luigus]

ahh ok, i'll ask Rodent about the Matrix.

also if i buy a new board off ebay, can't i just buy one that has a MXIC spi? then theres basically no chance off screwing up? or do i need to buy a WINBOND again and Kamakaze?

lol my friend is getting impatient, and the matrix freedom ships ina week, so he wants it even thougg its costing him.

[3D0kassiah]

dont buy a board just buy a tx or matrix
both come unlocked so all you have to do is flash ur firmware and dvd key and your good to go

[Rodent]

ahh ok, i'll ask Rodent about the Matrix.

also if i buy a new board off ebay, can't i just buy one that has a MXIC spi? then theres basically no chance off screwing up? or do i need to buy a WINBOND again and Kamakaze?

lol my friend is getting impatient, and the matrix freedom ships ina week, so he wants it even thougg its costing him.

The matrix works great and for the money if your going to spend it's worth buying, also if you can get a TX unlock board they work great also... I knew that idea of drilling a hole in the chip was a bad idea...  I have a winbond regular board i sell if you like to try it again. I dont know what shipping would cost . to south africa but cant be that much. 

Its $17.00 usd to ship let me know we work on a price if you want.

[Luigus]

The matrix works great and for the money if your going to spend it's worth buying, also if you can get a TX unlock board they work great also... I knew that idea of drilling a hole in the chip was a bad idea...  I have a winbond regular board i sell if you like to try it again. I dont know what shipping would cost . to south africa but cant be that much. 

Its $17.00 usd to ship let me know we work on a price if you want.

thanks for the offer Rodent, but i already bought the Matrix last night.

I will update here if the Matrix fixed the problem. Thanks for all the input guys. Helped a lot!

 

[Rodent]

thanks for the offer Rodent, but i already bought the Matrix last night.

I will update here if the Matrix fixed the problem. Thanks for all the input guys. Helped a lot!

 

No Problem , figure i would save you some money, and you could try again   you will like the matrix PCB easy install. if you need help let us know  keep us up to date also 

[Luigus]

OK Guys, Finally Got it working :P

First off all thanks to Everyone who helped out, theodor, EDO, kingMike and ecpessially Rodent, you guys Rock..

So i ordered a Matrix Freedom Lite PCB, and decided to use the solder less installation first just to see if its actually the pcb that's the problem, turns out it is, and weren't the laser at all...

So me being me, decided, to scrap the solder less, and solder myself, Stupid Idea.

I ended up soldering two wires wrong way, and frying the laser..
thank goodness, i had a laser shipped before, when i thought it was the laser...
Popped in the new one, and the games now run, but may need a tweak, since its struggling to run some originals and backups...

[Gizmo613]

Glad you got it working. Yeah Everytime I put in a new laser, it always needs a bit of tweaking. no matter what system I get a new laser for.

[Luigus]

Glad you got it working. Yeah Everytime I put in a new laser, it always needs a bit of tweaking. no matter what system I get a new laser for.

yea i tweaked it abit last night. and couldn't better my results.. dude do u maybe have a link to a tut on how to tweak or some general guidelines?

thanks

p.s. was wonderig if u could somehow put the pcb of the slim liteon into lets say a phat liteon drive, would it work?

[Rodent]

yea i tweaked it abit last night. and couldn't better my results.. dude do u maybe have a link to a tut on how to tweak or some general guidelines?

thanks

p.s. was wonderig if u could somehow put the pcb of the slim liteon into lets say a phat liteon drive, would it work?

I have replaced lasers never had to tweak a new laser , usually older lasers if swapped them from another drive... also no the slime liteon pcb will not work on the older phats. lasers are different if you look at them

[Gizmo613]

Aren't new laser shipped with the antistatic solder point. That has to be removed? Not sure if it applies to every new laser.

[Rodent]

yes they are and need to removed.

[Anonamous]

You should always unplug the laser from the drive before flashing the drive. I have heard from many people that their laser burned out and they receive the "open tray" error after flashing a lite -on drive (both slim and phat lite-on drives) with the laser still plugged in.

[Luigus]

thanks for the info, ill plug it out next time. as for the solder i need to remove? where is it? ife read about it, but couldn't locaTe it..