Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Problem I am not getting any activation light on the readout only in power. I also notice with the Micro SD to SD adapter for the card reader I get power for 5 minute then it shut off till I pull it out and push it back in. In jrunner when using a micro SD to USB adapter it reads out as "Physical drive 1" but with 0Mb even if the micro SD adapter is out of the USB unit. I thought it was because I was on my HP laptop with windows 8 x64. But I tried it on my Windows7 x64 desktop with the same issue. I have a built in card reader with micro SD slot. I got the card reader from eBay for under $15.
it will still dump the nand even though it says 0mb, just press continue when it says its not the normal size. When I did mine it showed 0mb aswell, then put the NAND as the source file and j-runner will verify its ok.the console shouldnt boot when you have the switch set to R/W, if it does theres something wrong with your soldering
huy...... the only main difference between the trinity and corona boards is the nand chip and the hana chip. trinity has both the normal 16mb and hana chip. the corona has the variation in nand chips as well as the normal 16mb chip. also the corona does not have the hana chip. other than that and the missing post out traces, the install points should be the same. stop trying to figure out the which point belongs to which for the nand-x or jrp. you need the 4gb r/w kit for the 4 gb corona. also the reason you are not seeing the glitch(green) light blinking, its simple. you dont have the coolrunner programmed with the timing files. as is without programming it, it is blank. thats why theres only a red light.check r2c10 and make sure there is a resistor there, if not, bridge it. the r/w kit is picky on which card reader you use. you have to try out as many as you need until you find one that works.Also, do not write the ecc to the console until you can confirm you have a complete nand dump of your console.
once you have the nand dumps you can write the ecc and then get the CPU KEY . then you can create your image and write the nand ... your work looks really good. great job for your first time! make sure you reinstall the CPU/GPU heatsync and the fan before powering it up. due to it will get hot fast. could be why its not glitching. double check all your work. from pics it looks correct.
Makes me want to try it. Nice work
Correct His Is Trying To Get His Cpu Key. But He Needs To Prgram His Coolrunner To Get It To Glitch Boot Into XelL. If Theres IsA Way To Glitch Without A Glitch Board, Let Me know.
If I am not mistaken, He is only trying to get the cpu key files for the xkey. If I was following this post right.... Anyways if this is so and you have the dumps then you are almost their. Just need to get into xex and get the key.
wasnt trying to sound insulting, its just when im on my phone, it auto cap the first letter of every word. it would have been the cheaper route if he had paid someone else to grab the keys. but from my understanding, he is trying to do this himself for learning experience. lol he picked a tough console to learn on as well. but yeah, you have to do the full rgh install if you want the dvd keys from certain dvd boards. the dvd key is stored on the nand itself for dvd boards dg5s and hitachi dln500. so the cpu key is needed to decrypt and extract the key from the nand files.
dual nand not possible on the v4 corona yet.
you can do a little more with the jr programmer. like programming the sonus. also if you get the jrp v2, you will get the rater feature that works with the cr3pro and the new r-jtag. fine tunning for faster boots.
scroll up vision, he edited his post rather than make a new post. and thanks for the vouch
nand x is about 20-30 sec faster than jrp v2. but it cost a bit more. but its up to you on what you want to get.
buy both just incase cause one you will want the nand x for BB jaspers, you will also want the jr programmer for other things like the sonus and just incase you fry your nand x i know its happened to me,
Lets get some more pics in here!! I want to see the current state.