« previous next »
Pages: [1]   Go Down

Author Topic: LOST TRACE ON CG2 XBOX 360 CONTROLER  (Read 1433 times)

Offline Jinz0r

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
LOST TRACE ON CG2 XBOX 360 CONTROLER
« on: August 21, 2019, 08:10:03 AM »
Hello people someone can help me?

I'm very beginner

I changed the left potentiometer of my xbox control, but when removing the solder, I lost the track responsible for doing the up low function, where can I make a jumper to recover this track?


I tried to make a jumper and scrape the area but was unsuccessful.



Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #1 on: August 24, 2019, 08:20:18 PM »
The bottom POT connection you can just jumper wire to the solder lug below it.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Jinz0r

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #2 on: August 26, 2019, 07:11:37 AM »
Hello DRC, thanks for your reply.

Would the jumper be from this POT, for the potentiometer?

I already tried it that way and couldn't make it work.


Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #3 on: August 26, 2019, 07:38:30 AM »
No. The top of the jumper wire is correct, the bottom of it needs to go to the spot that is just to the left there.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Jinz0r

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #4 on: August 26, 2019, 08:49:36 AM »
OFC RDC

thank you i will try now   :hifive:


in case is this right?





 :tup:
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #5 on: August 26, 2019, 09:31:37 AM »
No, just below that, the big solder lug, attach the wire to that.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Jinz0r

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #6 on: August 26, 2019, 10:20:02 AM »
LOL sry for my dumbness in case is the TP1?
Logged

Offline Jinz0r

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #7 on: August 26, 2019, 10:27:43 AM »
or the right jumper is on the GND of the pot?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #8 on: August 26, 2019, 01:16:18 PM »
The bottom lead of 3 at the POT is Ground, you have that part of the idea right. Just solder a jumper wire from that bottom lead to the the solder lug, the big metal thing sticking up out of the board, of the stick that is right there. To the left of your red line, and below the yellow one.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Jinz0r

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: LOST TRACE ON CG2 XBOX 360 CONTROLER
« Reply #9 on: August 26, 2019, 01:39:25 PM »
 :rofl: :rofl: :rofl: :rofl: ok man sry for my dumb! thanks!
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal