Hello there,
i've registered to this board, because i've some strange issue with a fake one of DS4-Controller.
As u can read above, something with button mapping isn't right.
I usually use Mortal Kombat Training Area to test repaired or damaged controller to figure out, what could be wrong.
After rebuild of a disassembled controller i figured out, that ifi press the L1-button, R1 is the respond. By pressing R1 both buttons are shown as pressed. (L1+R1)
I thought, it could be an issue of the foil installed, but another didn't brought any changes.
i guess, there is something wrong with the PCB and there i've devided some solderpoints. All where connected to the 3-pins of the analogue sticks.
3 bridges i've devided at all.
My intention was to put a foil between the original and the PCB as SCUF did, to install "new" triggers to R1 + L1 for a correct function. or do some soldering with triggers connecting at R1 / L1 and 3.2V on the PCB. But i don't really know if this will be helpful.
![:confused:](http://acidmods.com/forum/Smileys/default/confused1.gif)
I appreciate some help with this
![:)](http://acidmods.com/forum/Smileys/default/smile.gif)
I'll upload pics of my curious doing asap.
![tup :tup:](http://acidmods.com/forum/Smileys/default/tup.gif)
with regards,
Baldur
![](https://i.postimg.cc/tnD0s6gp/15967292845003742409397277274916-autoscaled.jpg)
![](https://i.postimg.cc/MXwvj8GF/20200806-174950-autoscaled.jpg)
![](https://i.postimg.cc/xqPqvFJT/20200806-175056-autoscaled.jpg)