Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Robin I r sorrieez.
However today I was brutally raped by a door handle, and none of my friends helped me up off the floor after ten minutes, instead they all teabaged me, all 10 of them...
hey on the wii mote, the leds are allways on
if im using 0603 leds, how many of them can the wiimote and nunchuck controller handle? thnx great tut will consider doing this soon
ok i decided to make a tutorial on how to mod your wiimote and nunchuck so they can light up. :buttrock: sorry if you think this tutorial is long. tell me what you think of my tutorial ;D ok lets get started. sorry for the big pics 1.These are the things you needWiimoteNunchuckSoldering IronSolder3mm Blue LedTri-Wing ScrewdriverPhillips Screwdriver SetCup Cake Mat :buttrock: roflStep 1First you get your wiimote, nunchuck, soldering iron, solder, etc...Step 2Now you take your tri-wing screwdriver and you take your nunchuck apart like soStep 3 You take your 3mm led and you solder to these points on the nunchuck board like soStep 4Now your nunchuck should look like thisStep 5 You plug your nunchuck to your wiimote and see if it works if so put everything back together like thisAnd there you go your modded nunchuck now on to the wiimoteStep 1You get your wiimote and take it apart like soBe careful on this part take your phillips flathead and pry your wiimote cover off but dont break itStep 2Now you take the board out of th casing and flip it overStep 3You solder your 3mm led to these pointsStep 4 Now bend your led over to the other side and position it like soStep 5Pop your batteries back in and see if it works. im my case it doesStep 6 If it works put your wiimote back together CONGRATS! :buttrock: YOU JUST FINISHED YOUR WIIMOTE AND NUNCHUCK MOD! HERE IS THE FINAL PRODUCT!Plz Leave +Karma Or Gold If You Used My Tutorial Thank You! ;DPinoy- please don't make the title in all caps