« previous next »
Pages: [1]   Go Down

Author Topic: PSP Slim screen  (Read 4954 times)

Offline Silkdeath

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
PSP Slim screen
« on: January 29, 2008, 01:38:08 PM »
Hi

i was doing the Trigger sound mod but when i out the psp on the screen didn't go on so i goteverything off and tryed
again, this time it turned on but not totally i think it's the backlight thats not turning on.
Does anyone know what the problem is??
The rest is all workingfine it's just the screen.... if i tilt it i can see the sreen very dark...

Thanks
« Last Edit: January 29, 2008, 02:09:10 PM by Silkdeath »
Logged

Offline prettierwendead

  • E = MC²
  • *
  • Posts: 327
  • Post quality +0/-0
  • Gender: Male
  • You Are My Living Legend
Re: PSP Slim screen
« Reply #1 on: January 29, 2008, 02:18:48 PM »
first check everything is connected properley if it is and ur sure then it could be the backlight fuse has blown
Logged

Offline Silkdeath

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #2 on: January 29, 2008, 02:21:14 PM »
everything is connected properly.
where is the fuse located??

Thanks for the help
Logged

Offline slslasher

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #3 on: January 30, 2008, 01:29:26 AM »
Behind the motherboard labled FB
Logged

Offline Silkdeath

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #4 on: January 30, 2008, 03:23:02 AM »
i found the label F- something 0,5A
how do i make a brigde?
Can someone make a tut or a picture of which points i should connect?
Thanks again
Logged

Offline DubbleDutch

  • BlietZ Modding
  • Millennium Poster
  • *
  • Posts: 1234
  • Post quality +3/-0
  • Gender: Male


Re: PSP Slim screen
« Reply #5 on: January 30, 2008, 08:14:46 AM »
u bridge a resistor by connection a small wire to both ends of the resistor ;)
Logged



To all of you crying about lag and kicks, remember… when Jesus died, took him 3 days to respawn. Now THAT is lag.

Offline Silkdeath

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #6 on: January 30, 2008, 08:35:07 AM »
i know, and it works the same for a fuse buti don't know wicht points i need to connect so if someone has as picture of it
that would help a lot

thank you

The fuse label is there but i don't know which points i need to connect please show me on this picture

THNX
« Last Edit: January 30, 2008, 09:08:45 AM by Silkdeath »
Logged

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: PSP Slim screen
« Reply #7 on: January 30, 2008, 09:10:06 AM »
bridge is just cover the fuse with solder.
Logged
Retired Modder, minor dabbling from now on :P

Offline Silkdeath

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #8 on: January 30, 2008, 11:45:47 AM »
yes i know but where is the fuse??? could someone place a cirkel around it?
It would mean alot Thank you!!!
« Last Edit: January 30, 2008, 12:18:23 PM by Silkdeath »
Logged

Offline Silkdeath

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #9 on: January 30, 2008, 02:06:25 PM »

i found the fuses i think, no correct me if i'm wrong if i measure wit the multimeter with that function that is beeps when something is connected(don't know the name:P) and if te fuse isgood i should get a beep if i measure it on both sides. am i wrong? if not then they are both broken because i don't get i beep, should i make a bridge for both??
Thanks for all replies people!
Logged

Offline slslasher

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 73
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #10 on: January 30, 2008, 05:14:28 PM »
is the right hand side FB, the left hand side LB is the speaker fuse.
Logged

Offline Silkdeath

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #11 on: January 31, 2008, 07:10:17 AM »
ok i made a brige but still nothing.
on the ribbon of the backlight are 4 pins when i put my multimeter there i get no reaction is there some way i can fix it ?? like connect ??V to one of the pins there??
Logged

Offline Silkdeath

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
Re: PSP Slim screen
« Reply #12 on: January 31, 2008, 12:34:52 PM »
ok i found the problem the connector was lose...........
when i tilted the srceen when the psp was on i saw it turning on then the connector broke off....
so i'm gonna solder the ribbon to the MOBO or does someone recommend anything else??
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal