d-pad solder points+ds screwdriver

[coulonkid2012]

ok ill start with the problem ive looked everywhere and cant find a d-pad layout solder points (im doing a simple analog mod) also everyone is talking about the ds screwdriver i just made my own with a di-grinder rotary tool and its bettr than most ones u can buy

[Tri-edge]

what do you need them for the ds phat or the lite?

[coulonkid2012]

oo srry lite

[Tri-edge]

okay I away from my main computer right now so I can't edit pics right now but I'll do my best to describe them to you.
ok you should see two contacts for each direction on the dpad I will tell which on you need to solder to.

1. for up you solder to the left contact
2. for right you solder to the bottom contact
3. for down you solder to the right contact
4. for left you solder to the upper contact
5. and for the ground you should see a square with an another square in it below the screen ribbon cable you solder to     there

and that should be it

[coulonkid2012]

so like this

idk if the ground is an ok spot but r u talking about the the gold square with the little black square in the middle
ight thanks for the help

[Tri-edge]

so like this

idk if the ground is an ok spot but r u talking about the the gold square with the little black square in the middle
ight thanks for the help

you that's right but I would use the ground below the screen cable, it's much easier to solder to. and where did you get that picture? I think I've seen it before but I don't know where

[coulonkid2012]

ya ok i will use that one the and im not sure where i got it from somewhere on am
ill post sum pics when im done

[Shadow Ops]

you that's right but I would use the ground below the screen cable, it's much easier to solder to. and where did you get that picture? I think I've seen it before but I don't know where

https://acidmods.com/forum/index.php?topic=27388.msg201973#msg201973