Author Topic: PSP Trigger Mod fixed pictures (Read 76549 times)

kaz · « **Reply #60 on:** January 02, 2009, 01:35:23 PM »

First of all this is the best site ever!!

Thanks for the tut but i have one question this tut is for putting only leds in the triggers or can is use it to put more leds like 8??
Thanks for all

and keep up the good work!!

jay_88888 · « **Reply #61 on:** January 09, 2009, 05:41:21 AM »

ahm guys is this mod applicable for psp2000?

whitetop · « **Reply #62 on:** January 21, 2009, 07:17:46 AM »

no the ps2000 is in another thread this is just for the ps1000

juust0_ · « **Reply #63 on:** February 02, 2009, 05:17:26 PM »

Im trying to add 6 0603smd leds and hook them to my powerboard. Do i need 10 ohm resistor or what? Ill use blue leds. Any resistors here --> http://www.led1.de/shop/ , that i can use

skd05 · « **Reply #64 on:** February 08, 2009, 01:23:10 PM »

Thank you for the doog pic.Can i use the 3 volt 3mm red led instead or were can i bye the right led please help

Edit-

sorry (GOOD)

~Jumbo- Don't Double post. Thanks

pirite · « **Reply #65 on:** March 04, 2009, 07:09:36 AM »

just wondering, has anyone tried putting a switch in so they can turn the lights on and off when they choose?

gamerdude767 · « **Reply #66 on:** March 04, 2009, 09:12:25 AM »

Quote from: pirite on March 04, 2009, 07:09:36 AM

just wondering, has anyone tried putting a switch in so they can turn the lights on and off when they choose?

you would need a dip switch.. ask jumbo he knows more than i do about them

pirite · « **Reply #67 on:** March 04, 2009, 10:03:35 AM »

Quote from: gamerdude767 on March 04, 2009, 09:12:25 AM

you would need a dip switch.. ask jumbo he knows more than i do about them

just sent him a pm. thanks a bunch

djprobc · « **Reply #68 on:** March 16, 2009, 02:46:31 PM »

hey ? uhh how did u get from two wires to 4?? and do u need a resistor??

Blazinkaos · « **Reply #69 on:** March 23, 2009, 02:23:25 PM »

Quote from: djprobc on March 16, 2009, 02:46:31 PM

hey ? uhh how did u get from two wires to 4?? and do u need a resistor??

Each led needs 2 wires that how they came about into 4.Yes you do need a resistor cuz it is directly connected to the 3.6v source.

Emerald · « **Reply #70 on:** March 31, 2009, 12:38:46 PM »

Ok I am a bit confused on how to wire this so I am going to post two wiring diagrams and I just wanna know which one is correct.

so just wondering which one is correct as the first would be easier but for some reason the second seems more correct. or will either one work. and if neither work could someone please post a wiring diagram. Also the board in mention is the circle square triangle x button board. Thanks for the help

Blazinkaos · « **Reply #71 on:** March 31, 2009, 05:59:51 PM »

use the bottom one

Emerald · « **Reply #72 on:** March 31, 2009, 06:03:23 PM »

will it matter that I am going to use red led's. will the 10 ohm resistor still be ok for that.

Blazinkaos · « **Reply #73 on:** March 31, 2009, 06:17:37 PM »

i dnt think so

hacker350 · « **Reply #74 on:** April 20, 2009, 08:07:33 PM »

SUP GUYS I WAS WONDERN WHERE YOU PEOPLE BOUGHT THE SUPPLIES FROM LIKE WHATS A GOOD SITE TO BUY THEM????
THANKS

Blazinkaos · « **Reply #75 on:** April 20, 2009, 10:49:14 PM »

supplies to this mod i suppose

cheezburger · « **Reply #76 on:** May 12, 2009, 06:42:01 PM »

Can someone tell me what the right SMD;s are from here?---http://www.kingbrightusa.com/category.asp?catalog_name=LED&category_name=KCChip+SMD+-+1.6X0.8mm+(0603)&Page=1 thx

DustySeven7 · « **Reply #77 on:** May 25, 2009, 02:00:29 PM »

Quote from: ndru98 on October 03, 2008, 07:28:51 PM

O!!! Thats what I was asking, do I make the knot at the end, or in the middle. But now I get it.. you make it like so one end is smaller, the small end goes to the + and -. And the other end goes to the LEDS... lmao, I get it.. then the resistance goes where? O.O

the resitor goes on the negative wire. the gold strand on the resitor should be away from the led.

Blazinkaos · « **Reply #78 on:** May 30, 2009, 01:07:52 AM »

Quote from: DustySeven7 on May 25, 2009, 02:00:29 PM

the resitor goes on the negative wire. the gold strand on the resitor should be away from the led.

No no the resistor goes on the positive wire not the negative. It doesnt matter witch way the bands face guys i done this a many times and it doesnt matter.

Blackie1909 · « **Reply #79 on:** June 14, 2009, 08:50:30 AM »

Hey Hello,
I'm sorry do post in here, but i'm not able to start a new thread..I hope someone can help me..

I want to make the sound reactive trigger mod with the hold button as ON-Off-Switch...

I think it shoud work like these:
I get +5voltage from the speakers,from there i go to the hold switch,then from the switch to the leds and finally to the resistor on ground..

in theory it should work, but i have not had a look inside my psp..So could me please anyone tell if this is working?

Thanks in advance

ps: sorry for posting it in here and also for my bad english

edit: sorry ..now i have figured out when i get from one Speaker both leds are set a light..
so i have do do i it the other way.ihave to go from the speakers to the leds and from there to the switch followed by the resistor and ground..

Now I'm right,or?

Blazinkaos · « **Reply #80 on:** June 16, 2009, 08:56:02 PM »

Talk with one of the admins they can help you.
Look through the PSP sections or maybe the TUT sections you may find what your looking for. I believe thats where the trigger TUT is located unless it was moved.

Dragonspirit · « **Reply #81 on:** September 26, 2009, 01:58:33 AM »

Quote from: Blackie1909 on June 14, 2009, 08:50:30 AM

edit: sorry ..now i have figured out when i get from one Speaker both leds are set a light..
so i have to do i it the other way.i have to go from the speakers to the leds and from there to the switch followed by the resistor and ground..

Now I'm right,or?

um, im sure you put the Resistor BEFORE the LEDs mate, on the POSITIVE side...Basic NooBy Mistake!!

(Data from- http://www.phenoptix.com/DataSheets/DATASHEET.pdf)

and i dont use a resistor when going from the speakers... its 2V constant and 3.3V max i think... will need to get out the MM and check for you!!
... I seem to be seeing a lot of Tuts with that backwards advice.
and yes you wire from

Positive(speaker~)>Switch>Resistor>LED>Ground (speaker~)...

I would use DIP switches to turn them all on or off if you want to do a Dual LED mod,( 2 sets of LEDs in each L+R button!) as you can only use the hold switch to turn on one set of LEDs... so if you use 2 channels... like left and right Speaker for EG (see Utube Vid Below).. you would need to have 2 swithces otherwise you would not have 2 channels, you would cross wire the 2 curcuits!

Dual Sound Activated LED MOD ( L+R Buttons)

nfs177 · « **Reply #82 on:** May 13, 2010, 03:41:47 PM »

for leds try here :tup:http://www.phenoptix.com/shop/0603-leds-c-21_30_32.html?sort=2a&currency=USD

News:

Author Topic: PSP Trigger Mod fixed pictures (Read 76549 times)