Author Topic: quike 5 v Q need now  (Read 3048 times)

Offline budgray19

  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2134
  • Post quality +1/-0
  • Gender: Male
  • OH NO MY CHITTY CHICKEN, NOO NOT MY CHITTY BEEF
quike 5 v Q need now
« on: July 10, 2008, 08:18:19 AM »

im using that as my 5 volt for my sound chip mod but i need another one
the spot i was using is too hard to solder to with ouit short circut with the grouund or other leads
i wouuld love any help


Offline rceckspurt13

  • Acid Modder
  • *
  • Posts: 637
  • Post quality +2/-0
  • Gender: Male
Re: quike 5 v Q need now
« Reply #1 on: July 10, 2008, 09:02:07 AM »
I believe there is a 5v point ok the back of the powerboard. People use it to do the trigger mod.
Any Questions? Please Contact Me: rceckspurt13@gmail.com

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: quike 5 v Q need now
« Reply #2 on: July 10, 2008, 09:31:47 AM »
I believe there is a 5v point ok the back of the powerboard. People use it to do the trigger mod.

The powerboard has 3.6 volts............

I belive that the only 5 volt +

Maybe poke around with a multimeter

Offline budgray19

  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2134
  • Post quality +1/-0
  • Gender: Male
  • OH NO MY CHITTY CHICKEN, NOO NOT MY CHITTY BEEF
Re: quike 5 v Q need now
« Reply #3 on: July 10, 2008, 10:23:36 AM »
hmmm
wouldnt a 3.6 volt work for the bigger sound mod chip?


Offline socomhacker239

  • E = MC²
  • *
  • Posts: 327
  • Post quality +0/-0
  • Gender: Male
Re: quike 5 v Q need now
« Reply #4 on: July 10, 2008, 12:56:18 PM »
JUS USE ELETRICAL Tape an hot glue

sorry for using caps i didnt notice till right now lol an i dont feel like retyping

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: quike 5 v Q need now
« Reply #5 on: July 10, 2008, 01:14:42 PM »
No 3.6v wont work for the sound mod, it needs the 5 volt point. just make the end of the wire really short and put on, its kinda annoying when it shorts put some hot glue over it that what i used

Offline Aricado

  • Granny Spanker
  • *
  • Posts: 398
  • Post quality +0/-0
  • Gender: Male
  • Hiding under your bed devouring your dreams..
Re: quike 5 v Q need now
« Reply #6 on: July 10, 2008, 03:46:39 PM »
It's so damn easy to solder there!!
How can you make a short?
And dam!! What's that behind the speaker
female connector??

EDIT: On topic,I don't know of any other 5V spots,I have never bothered to find another one.
+ you can just solder to the positive and and find a same ground somewhere else on the mobo
to solder.I say same because psp has more than one GND's and that's cool. =)
« Last Edit: July 10, 2008, 03:50:55 PM by Aricado »

Aricado: Kenshinffx made my sig.
"I made your Avatar too!"
Aricado: Get outta my head!!!!

Offline j.s2ghetto

  • Millennium Poster
  • *
  • Posts: 1001
  • Post quality +0/-0
  • Gender: Male
  • GHETTO inside
Re: quike 5 v Q need now
« Reply #7 on: July 10, 2008, 03:52:53 PM »
https://www.acidmods.com/forum/index.php?topic=17761.msg133741#msg133741

go down to the r trigger soldering and look at the connector there is a 5v on that

thank u P3nnywise for the sig
"See you have to understand the difference. The difference between me and you is to you, this is your job. To me, this is my life. The club; that's my job. The mall; that's my job. Your neighborhood; that's my job. This studio; this is my life. This is what I do better than anything."

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: quike 5 v Q need now
« Reply #8 on: July 10, 2008, 05:09:13 PM »
LOL i just learned a new 5 volt point J.s2ghetto he cant solder the other one which is bigger and much easier to solder so hecant really do this one i would imagine

Offline budgray19

  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2134
  • Post quality +1/-0
  • Gender: Male
  • OH NO MY CHITTY CHICKEN, NOO NOT MY CHITTY BEEF
Re: quike 5 v Q need now
« Reply #9 on: July 10, 2008, 08:47:11 PM »
It's so damn easy to solder there!!
How can you make a short?
And dam!! What's that behind the speaker
female connector??

EDIT: On topic,I don't know of any other 5V spots,I have never bothered to find another one.
+ you can just solder to the positive and and find a same ground somewhere else on the mobo
to solder.I say same because psp has more than one GND's and that's cool. =)
well im using a 30 watt iron
i liek it better because it melts solder better and faster
but its because the lil brass spot under teh connection that im using as a ground


umm teh 2 solder points u saw behind the speaker plug was for one of my 8ohm speakers i was gonna put in teh umd door
but i never got around to do it

but yea thx guys for all the help and attention
genealy ppl dont respond

edit
my god theres no way id be able to do that or risk my mobo lol
« Last Edit: July 10, 2008, 08:52:17 PM by budgray19 »


Offline budgray19

  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2134
  • Post quality +1/-0
  • Gender: Male
  • OH NO MY CHITTY CHICKEN, NOO NOT MY CHITTY BEEF
Re: quike 5 v Q need now
« Reply #10 on: July 12, 2008, 10:18:17 PM »
well i finally got it
and it turns out teh reason why my sound reactive mod wasnt working was because i had teh led hooked up to the neg and the ground to teh pos of leds LOL
(all the wiring is blue i lost my white wire)
and the right solder point is teh live point so yea.. work now
so thx guys


 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal