Author Topic: acidmods origional 12F683 HEX rapid fire (Read 38492 times)

SYSTEM aka (Cyberpyrot) · « **on:** July 29, 2008, 07:33:10 PM »

here it is

https://www.acidmods.com/software/butx-cod.rar

KingMike_OS · « **Reply #1 on:** July 29, 2008, 07:34:36 PM »

there every one happy there is the wiring Digrams for one or 2 swtichs
This works on both Type of Controller Old and New Style Wireless no resister needed
I tested on both wireless so please test it on wire one and let me know.

SYSTEM aka (Cyberpyrot) · « **Reply #2 on:** July 29, 2008, 07:46:05 PM »

Please everyone respect the people who made this code if you plan on selling it to your buddy be resonable $7~$8 not $30 as rapid fire on the 360 is so simple it does not justify gouging people....

redryno1221 · « **Reply #3 on:** July 29, 2008, 07:52:14 PM »

Thanx guys.

thm ov3rkill · « **Reply #4 on:** July 29, 2008, 07:56:46 PM »

thanks guys alot i didint expect this what programmer would you guys reccomand for this.

also i really think poeple out there will use this to sell 20 dollar kits on ebay giving them a unfair atvantage when they never did anything.

Whazup · « **Reply #5 on:** July 30, 2008, 05:35:55 AM »

Thanks man! Do you need resistors or only microchip and wire? For USA ppl here you can buy the pic12f863 :

http://export.farnell.com/9759034/semiconductors-integrated-circuits/product.us0?sku=microchip-pic12f683-i-p

*user* · « **Reply #6 on:** July 30, 2008, 06:32:43 AM »

thanks alot of the pic code i'm going to test it out later

what is the best code for a halo type player i'm really not in to cod that much

gameroms · « **Reply #7 on:** July 30, 2008, 07:01:29 AM »

halo 3 only lets you fire so fast because ist coded into the game, and only certain guns work with rapidfire.

thm ov3rkill · « **Reply #8 on:** July 30, 2008, 07:09:31 AM »

whats a good cheap programmer to write this code to the chip.

redryno1221 · « **Reply #9 on:** July 30, 2008, 12:16:07 PM »

Quote from: thm ov3rkill on July 30, 2008, 07:09:31 AM

whats a good cheap programmer to write this code to the chip.

I used this one http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3141

Ack Like You Know · « **Reply #10 on:** July 30, 2008, 12:53:57 PM »

If wired right, will this work the same as the sleeper or is the sleeper a whole different hex?

redryno1221 · « **Reply #11 on:** July 30, 2008, 12:55:32 PM »

Quote from: Ack Like You Know on July 30, 2008, 12:53:57 PM

If wired right, will this work the same as the sleeper or is the sleeper a whole different hex?

the sleeper is a whole different hex...

bluedog · « **Reply #12 on:** July 30, 2008, 01:11:10 PM »

Is the 2 switches for rapid fire on two triggers? The wire goes from the chip to each switch and the middle pin of both triggers? Mind me for asking, but what's the hex if we want to switch from off to single rapid fire to dual rapid fire through the triggers? You'd cycle through the options by using a momentary tact switch.

thm ov3rkill · « **Reply #13 on:** July 30, 2008, 02:17:54 PM »

is this tested and confirmed working?

Porkyfied · « **Reply #14 on:** July 30, 2008, 02:30:46 PM »

Quote from: KingMike_OS on July 29, 2008, 07:34:36 PM

there every one happy there is the wiring Digrams for one or 2 swtichs
This works on both Type of Controller Old and New Style Wireless no resister needed
I tested on both wireless so please test it on wire one and let me know.

i just tied it on a wired controller and followed the diagram and the controller would not swith on and then the chip started burning and went very hot.

hope this helps and will be awaiting your reply

Nemesis · « **Reply #15 on:** July 30, 2008, 02:42:15 PM »

Quote from: Porkyfied on July 30, 2008, 02:30:46 PM

i just tied it on a wired controller and followed the diagram and the controller would not swith on and then the chip started burning and went very hot.

hope this helps and will be awaiting your reply

sure you didn't confuse pin 1 with pin 8? its very easy to get them confused when its in "dead bug" position, as in upside down. i should know, happened to me

Porkyfied · « **Reply #16 on:** July 30, 2008, 04:10:38 PM »

Quote from: Nemesis on July 30, 2008, 02:42:15 PM

sure you didn't confuse pin 1 with pin 8? its very easy to get them confused when its in "dead bug" position, as in upside down. i should know, happened to me

ive just tried again same results so i swaped pins 1 and 8 over and put pin 5 on the other side then it shoots 1 shot and keeps jumping towards 4 o'clock untill i press RT them it rapid fires

any ideas?

thm ov3rkill · « **Reply #17 on:** July 30, 2008, 04:20:52 PM »

guys is this working well with wirless controllors?

KingMike_OS · « **Reply #18 on:** July 30, 2008, 05:58:23 PM »

i tested this code on both type of Wireless controller old and new the video is a old style controller with 2 switch ... the key word is wireless i don't like wire controllers and will not buy one now you can send me one to get it to work, sure.

but i think the 5v on wire controller may be too much .. should put a 100K on a power and sould work

Quote

i just tied it on a wired controller and followed the diagram and the controller would not swith on and then the chip started burning and went very hot.

Try putting a 100k radio shack part # 271-1347. also the rapid fire should only fire when the switch is press not the trigger. the switch don't turn the mod on/off.

thm ov3rkill · « **Reply #19 on:** July 30, 2008, 07:17:06 PM »

kinf mike if you dont mind me asking whats a good cheap programmer i saw on called jdm it was around 13.95im looking for one in between 10-25 bucks?

thm ov3rkill · « **Reply #20 on:** July 30, 2008, 07:45:14 PM »

mike what did you use to write the code what program?

KingMike_OS · « **Reply #21 on:** July 30, 2008, 11:52:13 PM »

I use this program

http://www.imagesco.com/microcontroller/picbasic-pro-compiler.html

and here a programmer for the price you where looking for

http://www.sparkfun.com/commerce/product_info.php?products_id=8

thm ov3rkill · « **Reply #22 on:** July 31, 2008, 02:27:32 PM »

ill buy the cheap programmer from there but do i need a serial cable to connect that to? because i see like a thing sticking out for power.

Ch4rL13 · « **Reply #23 on:** July 31, 2008, 02:36:52 PM »

Quote from: thm ov3rkill on July 31, 2008, 02:27:32 PM

ill buy the cheap programmer from there but do i need a serial cable to connect that to? because i see like a thing sticking out for power.

well the sparkfun programmer, the white thing is power i think and the metle thing is to hook up to a moniter i think? lol

Caution: The programmer may not work with low power serial interfaces - i.e. laptop or notebook serial ports. USB to serial cables have also not been proven to work.

OpTiCz · « **Reply #24 on:** August 01, 2008, 07:09:31 AM »

This worked very well for me.
I'm on the old school Wireless Board.

Ack Like You Know · « **Reply #25 on:** August 01, 2008, 10:12:54 AM »

Quick question on this. Say I wanted to have 2 separate buttons, one for each trigger. I see you have a wire going from pin 5 to the button and then a wire from the other side of the button to the middle pin for the Right trigger. Would it be at all possible to wire two wires from the pin 5 and have the second wire go to a button on the left with a wire coming from the left button to the Left trigger middle point? Would that work or would it just cause the right button to fire? Let me know as I'm about to pursue the install. Thanks

OpTiCz · « **Reply #26 on:** August 01, 2008, 11:25:50 AM »

That's what it shows in the diagram.
Power pin 1, ground pin 8, then pin 5 sends a constant rapid signal.
You could probably hook up any button on the controller to pin 5 for rapid fire.
I really wish spitfire worked, it would be even more cool to use the switch to enable burst, full auto, or off.

Ack Like You Know · « **Reply #27 on:** August 01, 2008, 12:02:53 PM »

Right, but what I want to know is if I could have both right and left triggers function as rapid fire through two different R and L buttons attached to the controller. I want 2 outputs to come from pin 5 to go to 2 different triggers. The way he has done it in his video is that the two buttons both fire the right trigger.

SYSTEM aka (Cyberpyrot) · « **Reply #28 on:** August 01, 2008, 01:41:48 PM »

Quote from: Ack Like You Know on August 01, 2008, 12:02:53 PM

Right, but what I want to know is if I could have both right and left triggers function as rapid fire through two different R and L buttons attached to the controller. I want 2 outputs to come from pin 5 to go to 2 different triggers. The way he has done it in his video is that the two buttons both fire the right trigger.

yes

OpTiCz · « **Reply #29 on:** August 01, 2008, 02:29:44 PM »

I didn't even notice.
I have two switched connected to pin 5.
Each switch goes to a different middle pin.
Works great.

News:

Author Topic: acidmods origional 12F683 HEX rapid fire (Read 38492 times)