New to PSP modding :l Sound reactive LED's

[PSPValentine]

Hi acidmods community i haven't been on for a longtime and had to focus on other things :l so i need help on sound reactive led's and other things.

this is the diagram made this morning from Lordnico's tut and others

i need someone to confirm if this is correct






i got most of my supplies from radioshack, not the best place to get electronic supplies of course but i don't know any hobby stores at location.

here's the following supplies i bought so far

1x blue kynar wire 50ft insulated 30 gauge
1x red kynar wire 50ft insulated 30 gauge
1x electrical tape pvc 3/4
1x rosin-core standard solder .032 8oz not .015 60/40 tin/lead
1xLM386N audio amplifier 400m W
1x and yes the big bulky soldering iron :l
1x flux rosin soldering flux
k the only things i need left are 191k ohm resistor,30k ohm resistor, and LED's

will these supplies be good enough for modding my psp? heard on tangent tutorial saying radioshack have very low quality stuff

and any tips of drilling the shoulder buttons? advices and opinions are welcome

edit gonna return my soldering iron and get a better one but also cheaper :l 15watt conical tip the one i got was just too darn horrible :l

[PSPValentine]

why  isn't anyone replying? ;'(
if i posted this in the wrong section, plz tell me so

[rinsaku]

Everythings fine... I guess? and this explains to me where the ground pin on LM386 goes...

[socomhacker239]

yea it all seems good but why dont you just dirct connect its way simpler an faster you can direct connect to the speakers to make it sound reactive or to the powerboard.

[zerojohnnyx]

Okay so I found the resistors to use for this but what size wattage should I get ? 1/4W , 1/8W 1/2W?

[Jumbo]

the smaller the wattage the smaller teh resistor.

get 1/4 watt

[zerojohnnyx]

Awesome! More than I needed to know , thanks!

[zerojohnnyx]

haha ... well I hope I do just fine. I have already purchased most of the equipment online & am waiting for it to be delivered. I just stumbled upon this site just a few days ago and have been going mad looking up different sound reactive led mod tutorials for my psp. You know just comparing the different tutorials. Mostly just the materials needed & these different tutorials I have come across. I have run across some & then I have run across some very detailed tutorials on this. The real questions may come when I actually have everything needed & am ready to set this up. Thanks for the information though.

[l0rdnic0]

Well if you guys need anything pm me!

[krainsyafiq95]

  that what i need as i wanna mod my psp!

[PSPValentine]

could this work? i had my 2 LED's negative wires tangle with a wire connected to the LM386 ground and another wire connected to the Wlan dead point wrapped with electrical tape.