Author Topic: New to PSP modding :l Sound reactive LED's  (Read 4469 times)

Offline PSPValentine

  • Chief squatting Hard
  • *
  • Posts: 10
  • Post quality +0/-0
  • Gender: Male
New to PSP modding :l Sound reactive LED's
« on: August 02, 2008, 04:51:08 PM »
Hi acidmods community :D i haven't been on for a longtime and had to focus on other things :l so i need help on sound reactive led's and other things.

this is the diagram made this morning from Lordnico's tut and others

i need someone to confirm if this is correct






i got most of my supplies from radioshack, not the best place to get electronic supplies of course but i don't know any hobby stores at location.

here's the following supplies i bought so far

1x blue kynar wire 50ft insulated 30 gauge
1x red kynar wire 50ft insulated 30 gauge
1x electrical tape pvc 3/4
1x rosin-core standard solder .032 8oz not .015 :( 60/40 tin/lead
1xLM386N audio amplifier 400m W
1x and yes the big bulky soldering iron :l
1x flux rosin soldering flux
k the only things i need left are 191k ohm resistor,30k ohm resistor, and LED's

will these supplies be good enough for modding my psp? heard on tangent tutorial saying radioshack have very low quality stuff :(

and any tips of drilling the shoulder buttons? advices and opinions are welcome :)

edit gonna return my soldering iron and get a better one but also cheaper :l 15watt conical tip the one i got was just too darn horrible :l
« Last Edit: August 02, 2008, 07:18:02 PM by PSPValentine »
(+ [__]·:·)PSPs are going to take over the world because us humans are enhancing the psp and going beyond its limits, and it will turn on itself and go against its master and annihilating the human race.

Offline PSPValentine

  • Chief squatting Hard
  • *
  • Posts: 10
  • Post quality +0/-0
  • Gender: Male
Re: New to PSP modding :l Sound reactive LED's
« Reply #1 on: August 06, 2008, 10:21:34 AM »
why  isn't anyone replying? ;'(
if i posted this in the wrong section, plz tell me so
« Last Edit: August 06, 2008, 10:28:04 AM by PSPValentine »
(+ [__]·:·)PSPs are going to take over the world because us humans are enhancing the psp and going beyond its limits, and it will turn on itself and go against its master and annihilating the human race.

Offline rinsaku

  • Chief squatting Hard
  • *
  • Posts: 25
  • Post quality +0/-0
Re: New to PSP modding :l Sound reactive LED's
« Reply #2 on: August 06, 2008, 03:23:42 PM »
Everythings fine... I guess? and this explains to me where the ground pin on LM386 goes...


Offline socomhacker239

  • E = MC²
  • *
  • Posts: 327
  • Post quality +0/-0
  • Gender: Male
Re: New to PSP modding :l Sound reactive LED's
« Reply #3 on: August 06, 2008, 05:11:50 PM »
yea it all seems good but why dont you just dirct connect its way simpler an faster you can direct connect to the speakers to make it sound reactive or to the powerboard.

Offline zerojohnnyx

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: New to PSP modding :l Sound reactive LED's
« Reply #4 on: August 15, 2008, 03:17:25 PM »
Okay so I found the resistors to use for this but what size wattage should I get ? 1/4W , 1/8W 1/2W?

Offline Jumbo

  • Dr. Mod
  • BST BAN
  • Around the block
  • *
  • Posts: 2399
  • Post quality +0/-3
Re: New to PSP modding :l Sound reactive LED's
« Reply #5 on: August 15, 2008, 06:16:07 PM »
the smaller the wattage the smaller teh resistor.

get 1/4 watt

Offline zerojohnnyx

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: New to PSP modding :l Sound reactive LED's
« Reply #6 on: August 15, 2008, 09:55:45 PM »
Awesome! More than I needed to know , thanks!

Offline zerojohnnyx

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
Re: New to PSP modding :l Sound reactive LED's
« Reply #7 on: August 16, 2008, 09:17:28 PM »
haha ... well I hope I do just fine. I have already purchased most of the equipment online & am waiting for it to be delivered. I just stumbled upon this site just a few days ago and have been going mad looking up different sound reactive led mod tutorials for my psp. You know just comparing the different tutorials. Mostly just the materials needed & these different tutorials I have come across. I have run across some & then I have run across some very detailed tutorials on this. The real questions may come when I actually have everything needed & am ready to set this up. Thanks for the information though.

Offline l0rdnic0

  • 2%
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1836
  • Post quality +8/-0
  • Gender: Male
  • TeamCYBER

Re: New to PSP modding :l Sound reactive LED's
« Reply #8 on: August 16, 2008, 10:34:33 PM »
Well if you guys need anything pm me!


L0rdNiC0 Pioneering Mods on the PSP Slim :taunt:
Sound Mod, Button LED Mod, Security Mod, Dual NUB, Mode Select Switch + More

Offline krainsyafiq95

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
Re: New to PSP modding :l Sound reactive LED's
« Reply #9 on: August 18, 2008, 01:39:36 AM »
 :clap: that what i need as i wanna mod my psp!

Offline PSPValentine

  • Chief squatting Hard
  • *
  • Posts: 10
  • Post quality +0/-0
  • Gender: Male
Re: New to PSP modding :l Sound reactive LED's
« Reply #10 on: August 20, 2008, 03:10:31 PM »
could this work? i had my 2 LED's negative wires tangle with a wire connected to the LM386 ground and another wire connected to the Wlan dead point wrapped with electrical tape.
(+ [__]·:·)PSPs are going to take over the world because us humans are enhancing the psp and going beyond its limits, and it will turn on itself and go against its master and annihilating the human race.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal