[TUTORIAL] Repair sound

[Arioch_76]

Hi all, This is a mini tutorial to repair sound if even after change speakers , you don't have sound 
The tutorial was done on a MB TA-081, you had to find alternative items for your MB version .

So take your motherboard and locate the weld shown in the photo:



Then solder two cable between the points (I had no sound from the right side, so I made the change to the right speaker , if it's the left speaker does not work anymore, made this manipulation with the other point)



Voila it's over

PS : sorry for my poor english , if an administrator or moderator can edit for more comprehension , thanks to him.
And sorry if I post in a bad section.

[LaCozTe-2028]

good job or you could just bridge a fuse

[Arioch_76]

Thanks but Fuse is on the Slim PSP , in the fat I haven't see a fuse for the sound....

[GhoSt]

great tut, Yea there is no sound fuse on psp phat.

[Blazinkaos]

yea but goof TUT there more option for repairing the sound tho...

[ApheX]

great mini tut dude, handy info to know.

[Jumbo]

Tried it on a Mobo that the sound in the right speaker didnt work.

It didn't work?

[natedoggy94]

hi there, thanks for the tut. my sound doesnt work on both speakers but i have a TA-086 mobo and the board is completely different and it doesnt have those solder points to solder onto its only got a bunch of resistors and stuff so does any1 know how i can fix it??

[Arioch_76]

Tried it on a Mobo that the sound in the right speaker didnt work.

It didn't work?

Hi , what's your MB ? , cause I do this on two TA-081 and it's work ....

That is a very very good find - your work really impresses me!

That is because it will be different for different motherboard versions, since on some they changed the routing, and circuit slightly through the capacitors into the bga ic.

Thanks a lot Alien_X 

hi there, thanks for the tut. my sound doesnt work on both speakers but i have a TA-086 mobo and the board is completely different and it doesnt have those solder points to solder onto its only got a bunch of resistors and stuff so does any1 know how i can fix it??

Ok I have a TA-086 at Home , I see this and I post a photo for the point in a TA-086

By

[Haze47]

So i havent been on here awhile, but finally got back on. Been wondering about this for some time since my right speaker hasnt been working, im assuming i did something when i was modding it. But from what i read seems like this will only work for the slim psp and not for the phat psp. Is this true, if not how could i do this for the phat psp? Thanks in advance. By the way my right speaker it the one not working from what i beleive, i wil have to check it out though. Thanks if anyone can help.

[Arioch_76]

Hi , this "tuto" is for phat PSP , for the slim there's a fuse to change for the sound :



+

[IceSlot]

I soldered the points like on the pictures(phat) but there was still no sound,then i dropped my psp down and now,sound si working great 

[Arioch_76]

Hi , sometimes I must remove the little black square component for the sound comeback , it's him which is broken , and perhaps he's just desoldering in somes case ......

Bye

[Sibobby1]

Hey Arioch_76,

I had a PSP, Ta-079, which broke through time, I mean I kept this thing together with glue, tape, rubber bands, and paper clips, not legitimately but still, My psp was in rough shape, to a point of disrepair, I bought another PSP, which was a TA-081 motherboard, Both speakers were working perfectly, when I took it apart, and put it in my clear case, without ever removing any components such as speakers and AC Adapter, I turned it on and tested a song, the right speaker wasn't working.... Grrr.... Any idea whats going on?
Message me back, thanks:

Sibobby1 = AIM
Sibobby1@hotmail.com = MSN
Sibobby1@yahoo.com = Yahoo
Sibobby1@gmail.com = Google Talk

Thanks Bro. I;ll upload pictures / videos soon.

[atomicareprise]

will this works on ta-082???my speaker are buzzing..

after the buzzing is gone it produces no sounds at all...

thanks..