PS2 right side analog help

[GhoSt]

Heya acidmodders I ran into a wee problem while modding the right side of the psp with a ps2 analog

done this mod once before with no probs following TDX's tut, trying it again on a powerboard I had lying around and wtf, now its acting as 2 X's and 2 O's. Triangles being a X and [] is being a O any1 know wat on earth I did wrong lol.

Any help apreciated thx people.

[DubbleDutch]

did u cut the potention meters ? so it becomes digital and not analog ?

[Alien_X]

did u cut the potention meters ? so it becomes digital and not analog ?

You mean potentiometers right?

You can't have cut the tracks well enough on the pots..either that or you just can't solder to the right points

[GhoSt]

lol, I pretty sure I soldered it right, same as dual nub to /\ []OX and ground. I think I will have another go at cutting em tracks, but still weird.

Edit:

got it working just need to get the /\ []OX around the right way on the analog, will work this out 2moz.

[LaCozTe-2028]

Nice make sure you add a vid if you can. What did you use a usb or a connector like benheck

[GhoSt]

Nice make sure you add a vid if you can. What did you use a usb or a connector like benheck

nah im having trouble with one of the pots, X and /\ both go at once when up or down is pressed. Its not going to be removable atm im working on breaking out the psp onto breadboards like Alein, so I can prototype controllers ect. This was just mucking around with the powerboard. This is on hold as I have a massive secret mod which Im working on and hoping will work.

[LaCozTe-2028]

Good luck ghost:clap:. Hope your secret mod works and maybe you didn't scratch it well enough i did it and it worked

[GhoSt]

Good luck ghost:clap:. Hope your secret mod works and maybe you didn't scratch it well enough i did it and it worked

Secret project gona be tested today and if its succesful I may post a POC in the weekend.

I got the analog working btw, it had one faulty pot so I replaced that with a aftermarket one and it works like a dream

[Alien_X]

Secret project gona be tested today and if its succesful I may post a POC in the weekend.

I got the analog working btw, it had one faulty pot so I replaced that with a aftermarket one and it works like a dream

How is this "secret mod" activated? Tactile switch, or just on/off switch and trigger presses?
Because if it is the first, I already posted a POC for a different method with a PIC.
And if it is neither, then ignore this.