AcidMods Wii Rapid Fire Kit /Wii RapidFire Pro Video Added

[SYSTEM aka (Cyberpyrot)]

Once again AcidMods is first to bring you some serious video game pwnage.. Now we have the Wii rapid fire kits. Ever wonder what an automatic shot gun is like? Well now you can see in house of the dead with the new rapidfire kits..With this kit you can have rapid fire on virtualy every wii game. Wii rapid fire will make gaming on the wii insane just check out this footage…

Wii Rapid Fire Pro NEW

In the next series of pictures you will see how simple the install is we will put up a more detailed tutorial up later.. but trust me this is a simple install out of all our kits this is the far simplest..


Thanks to Nintendo's simple PCB design which lables everything it was not hard to fing the power and ground locations...

Woot that chip looks mighty snug in there thanks Nintendo.. Also we have a convenient spot to place out activation button next to the sync button..
 

Looks so pretty she is ready to be turned on!!!!

We love having a activation led to let us know what mode we are in....

Get your Wii Rapid Fire Kit in the AcidMods Shop Here

[KingMike_OS]

Wii Wire Diagram.


Remove the 4 TRI-Wing Screws.


Wii Mote Internal Pic.


Chip and Switch locations marked with sharpie.


Drilling hole for switch.


Switch hole beside hole for sync button.


Switch and Chip in correct location.


+V and GND locations.


B location on pcb is Lable you can hook it up to the pads it self if its hard to solder to the B point


Yellow wire solidered to B location on pcb.


Yellow wire secured safely.

[mersi]

This is so da.n sweet...
I must have that on my wiimote!


And because of living in germany and not being able to order from your shop i would really appreciate a nice tutorial! :-)

[SYSTEM aka (Cyberpyrot)]

This is so da.n sweet...
I must have that on my wiimote!


And because of living in germany and not being able to order from your shop i would really appreciate a nice tutorial! :-)

we will post a tutorial soon and our shop ships world wide

[Bor311]

Could you please post the source that you programmed into the pic. That woud be awsome sauce.

[tapdisbong]

can you post a picture of the soldered chip

[gameroms]

no sir its not, but will be in the kit.

[ISOHaven]

Can you post an install diagram for those that don't want the LED?  I'd rather keep the installation even simpler and just guess which mode it's in.  I'm not a fan of flash.  I assume just leave pin 2 alone and still give pin 1 power?

Also, I have a couple extra remotes (7 total and only need 4).  I would love to play around with an always on unit.  What would happen if I shorted 4 and 8 to ground, gave 1 power and wired 7 to my button of choice?

One last question, what all comes in the kit? The chip AND the switch (wire?  I'm all out)?  The product page says chip only.  It seems that was to get accross to people NO WIIMOTE but I wasn't sure if the switch was incuded.  My radio shack doesn't sell that switch and getting them to order force feed is a PITA.

With all that said and asked...AWESOME JOB!  You guys rock!  I figured we would never see a Turbo remote since Nintendo will not license these things to anyone else.  THANKS!

[SYSTEM aka (Cyberpyrot)]

Can you post an install diagram for those that don't want the LED?  I'd rather keep the installation even simpler and just guess which mode it's in.  I'm not a fan of flash.  I assume just leave pin 2 alone and still give pin 1 power?

Also, I have a couple extra remotes (7 total and only need 4).  I would love to play around with an always on unit.  What would happen if I shorted 4 and 8 to ground, gave 1 power and wired 7 to my button of choice?

One last question, what all comes in the kit? The chip AND the switch (wire?  I'm all out)?  The product page says chip only.  It seems that was to get accross to people NO WIIMOTE but I wasn't sure if the switch was incuded.  My radio shack doesn't sell that switch and getting them to order force feed is a PITA.

With all that said and asked...AWESOME JOB!  You guys rock!  I figured we would never see a Turbo remote since Nintendo will not license these things to anyone else.  THANKS!

Everything you need comes with the kit LED, Chip, Button and wire...

[taylorclark]

you guys made it onto hack-a-day!

[Alien_X]

Could you please post the source that you programmed into the pic. That woud be awsome sauce.

They won't give you the source.
I recommend you purchase the kit from the acidmods store.
But if you want some code I wrote then message me, it works, and is simple.
Alien.

[ISOHaven]

Everything you need comes with the kit LED, Chip, Button and wire...

Awesome!  Thanks for the info.  Can someone also get to at least this:

Can you post an install diagram for those that don't want the LED?  I'd rather keep the installation even simpler and just guess which mode it's in.  I'm not a fan of flash.  I assume just leave pin 2 alone and still give pin 1 power?

[KingMike_OS]

yeah you can keep it simple .. we even made the basic simpler .. remove 10K not needed any more ..

IF you don't Want the LED than Just Leave Out Pin 5 .. thats it .. only 4 pin to wire up .. there only 2 mod any way

is not hard to tell which is Which

[ISOHaven]

Thank you very much for that!  My orders will be in soon.

I hate to be a bother, but now I have one more clarification:

only 4 pin to wire up

Your first diagram showed a switched ground going to pin 4 but in the new diagram it was moved to pin 2 and nothing on 4?

[802Chives]

Thank you very much for that!  My orders will be in soon.

I hate to be a bother, but now I have one more clarification:

Your first diagram showed a switched ground going to pin 4 but in the new diagram it was moved to pin 2 and nothing on 4?

Don't worry about pins moving around, these are microcontrollers that can be configured anyway the programmer desires.  Some pins have additional functions, so not every pin can do the same job, but for the most part all the pins can be used as inputs and outputs.

I think you may be looking at this like a chip with a special funtion like a 555, it is not.  It is more similar a computer in that it can be set up in many different configurations, with endless amounts of functions through custom firmware programs that are loaded to the chip.

Hope that clears it up for you, and don't worry about being a bother....there is no such thing as stupid questions, just stupid answers

[ISOHaven]

Don't worry about pins moving around, these are microcontrollers.....

What I meant by my question is that you stated "only 4 pin to wire up" but your new diagram has no 4.  I just wanted to make sure you meant pin 2.

Thanks again!

[Alien_X]

What I meant by my question is that you stated "only 4 pin to wire up" but your new diagram has no 4.  I just wanted to make sure you meant pin 2.

Thanks again!

I think by "4 pin to wire up" Mike means that you only have four wires to solder for the entire install.
Hope this helps you.
Alien

[ISOHaven]

I think by "4 pin to wire up" Mike means that you only have four wires to solder for the entire install.
Hope this helps you.
Alien

DOH!  It bit me.  That's what happens when you over think something.

Thanks!

[KingMike_OS]

Now the Pro kit is not for the  beginner its hard and lot's of work and making the wires fit

[treemty]

I just knew this would come out, next up psp rapid fire XD

[Alien_X]

I just knew this would come out, next up psp rapid fire XD

PSP Rapidfire isn't happening apparently.
I did it ages ago anyway.
It is just too simple, and useless.

[ISOHaven]

What's up with the shop?  Your shop link above brings back "Product not found" and I don't see any products after that???

[rietherll]

What I meant by my question is that you stated "only 4 pin to wire up" but your new diagram has no 4.  I just wanted to make sure you meant pin 2.

Thanks again!

Still waiting for the new style controller install pics and wiring diagrams

[robin1989]

What's up with the shop?  Your shop link above brings back "Product not found" and I don't see any products after that???

hey the shop is down as it got totally screwed when the servers whent down and crashed

[ISOHaven]

hey the shop is down as it got totally screwed when the servers whent down and crashed

Awe man, that sucks.  Ok, I'll wait for it come back online.  Thanks for the update.


edit*
I got your email about the store being back up.  Still waiting for the Wii product to show up.

Thanks guys!!!!

1Sniper- plz dont double post. just hit the edit button on the side of the post

[802Chives]

I finished those chips a long time ago, try messaging mike.  It was up in the store before the server problems, we'll get it up asap.

[KingMike_OS]

yup been having server problem .. its added to the shop

[ISOHaven]

yup been having server problem .. its added to the shop

Thanks for adding the basic kit back!  Is there an ETA for the advanced kit?  The dual button one?

[kaosbmx]

ok im lost... i just got my basic kit. does it come with LED's. their is a black and red wire wrapped together and on one end solderd to something very very small. (wat is that?) and also where do i put the switch that actually makes the rapid fire. it came with 2 switches. sorry im dumb. somone please help....

[KingMike_OS]

the black and and Red is the + and - for the 603 SMD led ..  that thing at the end is the led pre solder for you

there is also another one that is not solder its a extra one .. in your kit

why they are 2 switches .. 2 color red /black pick one what ever you like there is no wrong answer

the pro kit i will added this week to the shop ...

Now there are 2 ver of the Wii Remote Board and some one email me the picture of the new
board i have mark the points since its Diff that the one i did the TUT on :