Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Its somewhere on the mobo to powerboard zif connectorI should start saving pics to make it easier to find this stuff lolIll do some searchingEDIT--Edit-About the fader, Only difference I can think about is the Deluxe can handle 20+ leds by default & the little one can only use 10 by defaultAnd I don't think they are that much smaller Good Luck
Jumbo, that is the same +5v power point as the one you use on the powerboard.There is a pad which is +5 volts nearby, if you give me a close up of the motherboard near the zif connector I can point it out.
Yup it is.Measure it first though
Cool, i think i'm just going to get the fader deluxe, at least theres a tut for that and i can't be to work out the new one. not yet anyway.
It isn't too hard.Here I will help you:PO - Positive Point on the PowerboardSW - Notebutton (if you want to control with notebutton - you would have to sever the trace first) Otherwise, It would be : Sw -> 1 - 10k resistor -> Tactile Switch -> GroundL1 and L2 To negative of Leds, Could bridge pads together if you wish. Then connect positive of leds to a 5v Point Through resistor of appropriate value (preferably the motherboard 5v point)Connect the + Pad to PO, or just connect the Powerboard Positive to +And - to any ground.Done
Cool, well then the slim fader board it is then. Thanks for all the help today Alien. in regards to the Sw -> 1 - 10k resistor -> Tactile Switch -> Ground. i take it i could solder that wire to the wifi swich that already has a soundboard attached?
I don't quite understand, sorry.It needs to be a tactile switch, but I might not have interpreted what you were saying right.
sorry, i mean instead of using a tactile swich, would it be possibal to use the wifi swich on the mobo, like you would with a sound reactive mod using a Im386 chip for example.
try droping it againmy retared friend fixed by droping it 1Sniper- not to be an but, its special friend
Hey could you put the link to the tut i would like one feel like doing one with a fader thanks