Author Topic: Wii track ball  (Read 25712 times)

Offline SYSTEM aka (Cyberpyrot)

  • Site Founder
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 4091
  • Post quality +3/-0
  • Gender: Male
Wii track ball
« on: November 07, 2008, 05:32:03 PM »
This is the Wii track ball You will need a few items to do this mod a track ball assembly, an 11 pin .5 mm FPC clasp some wire soldering gun and solder. We will install a track ball on a wii mote for enhanced gamming..

here is the pin out for the track ball



Step one lightly sand down the traces so you are able to solder to them.. Here is an ilistration of the wiring lay out of the Wii-Mote..


Step two solder wires to the point shown in the picture. notice I soldered 3 grounds to one spot this will become aparent later..



Here is the corosponding points for soldering the trackball to the wii-mote



This is what your wii-mote track ball should look like when finished..


« Last Edit: September 02, 2010, 03:16:58 PM by modded matt »

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: Wii track ball
« Reply #1 on: November 07, 2008, 05:46:09 PM »
THAT IS AWESOME!

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Wii track ball
« Reply #2 on: November 07, 2008, 06:20:47 PM »
wicked, we want info :D :D
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline spaciousmind

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Acidmods User
Re: Wii track ball
« Reply #3 on: November 25, 2010, 12:21:35 PM »
hey, I have a sister with cerebral palsy and she has limited capacity with her hands, however we found that she could operate a SNES controller with some difficulty, and she can use a standard PC trackball quite well.

I don't really have experience with modding but I was just wondering if in theory it would be possible to wire this into one of those bigger PC trackballs somehow, and also if this could be applied to the analogue stick instead of the D-PAD?

Its probably way to complicated for me but I would like to know if its anyway possible all the same, cheers.



Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: Wii track ball
« Reply #4 on: July 20, 2011, 10:35:36 AM »
Seeing as this is no longer available in the shop is anyone able to provide any more details on the trackball used in this mod?


Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: Wii track ball
« Reply #5 on: July 20, 2011, 10:41:20 AM »
this could come in handy for alot of things now. and help with some of the projects going on right now also :)

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline 1TONpete

  • Millennium Poster
  • *
  • Posts: 1224
  • Post quality +47/-2
  • Sony specialist
Re: Wii track ball
« Reply #6 on: July 20, 2011, 10:46:09 AM »
What did he do? I dont really get it. I  wired up the track ball the same way and my results were not that good.
« Last Edit: July 20, 2011, 10:49:09 AM by denali31004 »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal