Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
so oh the PLUS side i mount the resistor. then i wire off leds from the resistor right?for green white i dont need resistors...so i wire the leds BEFORE the resistor right?
What the heck are you doing?Why have you put the same value resistor on each led's branch???
i got white,green (3.5 both) Red ,Blue,yellow (2.5) i would only need resistors for 2.5 v leds right? so how would i do that? cuz i only need resistors fpr 2.5 not 3.5
today i tried connecting leds to speakers. I only connect to one speaker right?
Psp, did you wire in parallel or series? If it's wired in parallel, I think you have to add resistors to equal resistance out or something and I don't even think you can wire it in series O_O. I don't know, but I know you can wire up diff color leds, but there's a certain way to do it. Still, the main question is: What's the voltage coming out O_O
which color didn't lite up? I think green doesn't use as much voltage.