Author Topic: new modder here.. first project.. (Read 6914 times)

RobTapps · « **on:** January 04, 2009, 12:17:41 AM »

first i have a slim and a fat.. so im modding my fat..

well i have an old fat that is bricked atm (waiting on a smaller MS to arrive so i can unbrick it..) and i saw that the psp 3000 has a built in mic, so what i want to do is put a mic in my fat.. i want to do this all intern.. witch leads me to my question..does any one know what pins trigger the mic??

i will also update this thread as my mod goes on..

will have pics tommrow..

rceckspurt13 · « **Reply #1 on:** January 04, 2009, 12:49:06 AM »

I don't know if the fat can support a mic. If it can, I'd like to know too. That would be sick to Socom and stuff. As well as go messanger.

RobTapps · « **Reply #2 on:** January 04, 2009, 01:45:37 AM »

yea they can.. i got mine when they first came out and i bought socom the same day when i went home i hooked up the internetz and played socom online.. and ppl were talking over mic..

RobTapps · « **Reply #3 on:** January 04, 2009, 02:10:36 AM »

Both PSP's (Fat = Bottom)

Pic showing Fat is Bricked

Mic Up Close

Sized next to a nickle

rceckspurt13 · « **Reply #4 on:** January 04, 2009, 02:23:35 AM »

Did you find out what pins are for the mic, or are those pics just to show the placement of the mic?

Looks like the mic is in there nice and clean.

RobTapps · « **Reply #5 on:** January 04, 2009, 02:34:42 AM »

sorry i guess i should have stated that i still do not know what pins to use.. and that these are just pictures of the placement of the mic.

and i got it so clean because there was a little rubber sleeve around the mic when i took it apart. so i drilled the hole to the sleeve and put the mic in. after that i trimmed the sleeve to be flush with the body of the psp. once i get this to work i will list parts and what not so you guys can try it too

RobTapps · « **Reply #6 on:** January 04, 2009, 04:03:59 AM »

OK! after googling* for a bit.. i found this!!

i am about to go do'er to'er!! will have more pics of my mod!

RobTapps · « **Reply #7 on:** January 04, 2009, 05:09:08 AM »

more pics showing wire path and mic.. i will also post a full tut. on this with video proof that it works in the tut. section.. (when i unbrick the psp)

FaT3oYCG · « **Reply #8 on:** January 04, 2009, 11:12:31 AM »

someone has done this before and make your pictures smaller.

RobTapps · « **Reply #9 on:** January 04, 2009, 03:12:37 PM »

well ok mr.negative...

RobTapps · « **Reply #10 on:** January 04, 2009, 03:14:08 PM »

Quote from: FaT3oYCG on January 04, 2009, 11:12:31 AM

someone has done this before and make your pictures smaller.

oh i guess you dont read eather.. because if you did you would see that i found the wiring diogram on google..

bustinthejustin · « **Reply #11 on:** January 04, 2009, 03:46:36 PM »

oh i guess you lack knowledge. Doesn't matter where you get your pictures... Just type

[ img width = 500 ] *insert picture here* [ /img ]

And remove all spaces except for the one between img and width.

RobTapps · « **Reply #12 on:** January 04, 2009, 03:48:28 PM »

no i wasnt talking about the img size.. i was talking about him saying it has been done before.. and i was saying no

i got a coupple pics from google so i know its been done..

Sanctus · « **Reply #13 on:** January 04, 2009, 06:34:17 PM »

Good job. I guess you have no means of testing it though because your PSP is still bricked?

bustinthejustin · « **Reply #14 on:** January 04, 2009, 07:04:58 PM »

Quote from: RobTapps on January 04, 2009, 03:48:28 PM

no i wasnt talking about the img size.. i was talking about him saying it has been done before.. and i was saying no i got a coupple pics from google so i know its been done..

Oh sorry, didn't read it properly i guess

RobTapps · « **Reply #15 on:** January 04, 2009, 09:05:49 PM »

Was partly my fault.. but here is some more pics!! there will be a tut up asap! (and yes i still have no means of testing it.. thats why im waiting to post the tut. )

i will try and get a MS tommrow

..

blackburn · « **Reply #16 on:** January 05, 2009, 12:44:29 AM »

looks good, if it works i might just have to do this to mine

, i wonder if the mic from a DS would work

Sanctus · « **Reply #17 on:** January 05, 2009, 01:38:27 AM »

Quote from: blackburn on January 05, 2009, 12:44:29 AM

looks good, if it works i might just have to do this to mine , i wonder if the mic from a DS would work

It should. The only way to be sure though is to open it up and see.

rceckspurt13 · « **Reply #18 on:** January 05, 2009, 07:08:02 AM »

I would try to find the smallest mic I could. Then you could make it all internal instead of having it stick out.

LaCozTe-2028 · « **Reply #19 on:** January 05, 2009, 08:36:06 AM »

Yup its should work ive already done it its in thepsphackers team tut pretty easy esier then in the slim

blackburn · « **Reply #20 on:** January 05, 2009, 09:57:56 AM »

Quote from: rceckspurt13 on January 05, 2009, 07:08:02 AM

I would try to find the smallest mic I could. Then you could make it all internal instead of having it stick out.

thats what im saying about the DS mic, its pretty small and, its made of rubber which can be pressed almost completely flat. I was thinking of using that, and carefully drill out one of the "speaker holes" on the faceplate and make it fit behind there, so it just looks like one of the speaker holes on the bottom of the PSP, but its a mic.

PhenomenalDesigns · « **Reply #21 on:** January 05, 2009, 12:47:31 PM »

Quote from: blackburn on January 05, 2009, 09:57:56 AM

thats what im saying about the DS mic, its pretty small and, its made of rubber which can be pressed almost completely flat. I was thinking of using that, and carefully drill out one of the "speaker holes" on the faceplate and make it fit behind there, so it just looks like one of the speaker holes on the bottom of the PSP, but its a mic.

The DS microphone is just enclosed in rubber, to stop vibrations I think and for sturdyness

Also is that diagram work? If it does I might do it, I have a few broken phone microphones laying around

RobTapps · « **Reply #22 on:** January 05, 2009, 01:35:35 PM »

yea i found a video on youtube of it working... but now that mine is done.. i went to turn on my bricked psp (so the light would come on and i could make sure i wasnt shorting anything..) the power light blinks at me.. what does this mean?

Sanctus · « **Reply #23 on:** January 05, 2009, 01:49:37 PM »

Quote from: RobTapps on January 05, 2009, 01:35:35 PM

yea i found a video on youtube of it working... but now that mine is done.. i went to turn on my bricked psp (so the light would come on and i could make sure i wasnt shorting anything..) the power light blinks at me.. what does this mean?

Low battery?

RobTapps · « **Reply #24 on:** January 05, 2009, 02:48:44 PM »

yea but it does it with a full batt and when i plug it in it blinks once and turns off..

FaT3oYCG · « **Reply #25 on:** January 05, 2009, 03:29:57 PM »

you borked it, and i wasnt being negative with my last post, simply stating a fact.

Sanctus · « **Reply #26 on:** January 05, 2009, 04:35:56 PM »

Quote from: RobTapps on January 05, 2009, 02:48:44 PM

yea but it does it with a full batt and when i plug it in it blinks once and turns off..

Have you tried unbricking yet?

RobTapps · « **Reply #27 on:** January 05, 2009, 05:05:44 PM »

yea but it doesnt work with an 8gb card

rceckspurt13 · « **Reply #28 on:** January 05, 2009, 06:50:24 PM »

Yeah i think the highest that works is 4. Id just go buy a cheap 1gb at walmart or somthing if i was you. If you had to rate this on a scale from 1 to 10 fir difficulty, where would you put it? From looking at it, id say about a 3-4. I havent taken my psp apart any farther than the mobo before. i had to take it out to do the usb charge.

RobTapps · « **Reply #29 on:** January 05, 2009, 10:02:49 PM »

well gtting the wire solder and the iron in that corner (with out burning your hands/melting the wire) is a big pain in the

and now i dont know what is wrong with it.. its like the mic is drawing more than 5 volts.. i think the mic needs a some resistors and a capacitor.. (like it had in headset form)
EDIT: i would give it like a 4-5

News:

Author Topic: new modder here.. first project.. (Read 6914 times)