dual rapid fire for halo3 help

[everlast4291987]

my controller is cg the new style and i would like to make a dual trigger rapid fire for halo3 i dont play gear of war or cod i just have halo3 for now and would like help im how to make one and other stuff i have read some post mostly on the matrix rf and some on cg but none talk about cg dual rf for halo3 how do i make one and where can i get the cheapest programmer for the chip of where can i get one pre programed for halo3 i would like it to be a sleeper dual mod you know incase i do get gears of war or cod

please help me out

thank you

[Modded Matt]

the best advise I can give you is to buy this: https://acidmods.com/ShopUSA/product_info.php?products_id=38  from the shop, or you can try thishttps://www.acidmods.com/forum/index.php?topic=22727.0

[everlast4291987]

then how would i make a a cg dual rapid fire controller and i will buy the chip that is preprogrammed for halo 3 if there is a way could i have the link for it

[treemty]

This is the closest thing you can get to halo rapid fire
https://acidmods.com/ShopUSA/product_info.php?cPath=26&products_id=49

[everlast4291987]

now if i buy this how to i solder it to a thing half the size of a grain of rice the led is so small i dont want to damage it

[Ghost In Black]

Just practice a little bit with some scraps of wire. The first time I ever soldered I put a wire on the 3rd player LED with a cheap Radio Shack soldering iron. Not too hard if you have patience.

[everlast4291987]

ok will do as i heard that you could put solder on the wire first and let it dry and then put the wire to the led and then tap the soldering iron to it and it will solder it to the led.

[Modded Matt]

yes, this is called tinning , it is good practice for any soldering job you need to do.