ps3 rapid fire problem really slow fire????

[socomhacker239]

This topic waas about a different subject and i different topic so i just editdd this one. so i have the rapid fire installed and on cod5 the rapid fire actually shoots really slow i have went step by step and re soldered everything 6 times no lie but still he same results any help is highly appreciated thank you.

[ndru98]

You can find em on those xbox forums.
Forgot its name

[socomhacker239]

oh and i used the right resistor i made sure also even the machine guns fire slow lol.
EDIT: well now im down to using a 10k resistor XD i was just thinking about bridging the 2 points together its still going sorta slow but better then before when i fire a fully automatic gun the rate of fire is slow if i use the regular r1 it will fire faster then using the rapid fire button.

[GBlaster]

Your not supposed to use rapid fire with an automatic gun.

[socomhacker239]

oh haha that help out alot. But still when i had the 56k resistor on the hand guns it fires slow and on the other guns too. But im using only 10ks of resistance im going to switch it back to 56 ks and update later this later.

[GBlaster]

Alright, let me know how it goes.

[socomhacker239]

ok well i just reinstalled it and online the first clip i unload works but then after that it would go slow i think i might need to use a bigger resistor.

[Modded Matt]

ok well i just reinstalled it and online the first clip i unload works but then after that it would go slow i think i might need to use a bigger resistor.

just a quick question socom, Are you testing your mod with cod5? if so, your timing is too fast.

if not, and this is happening on say cod4, its not a bigger resistor you need, its a bigger capasitor, you are depleting all the juice from the 555 during the first clip. I delt with this issue on the xbox.

[GBlaster]

it might be possible your using the wrong type of 555 timer. it should be a Low Power - 555 timer.

[socomhacker239]

hahahaha aday late and dollar short i just took out the parts, But yea i was testing it with cod5 so i do need a bigger resistor huh. I tripled checked the numbers on the packages i got from radioshack and it was a match to the numbers you posted gblaster.

[Modded Matt]

no, socom, the reason I asked that question is because your mod is working correctly. cod5 has a cap built into the game that restricts your fire rate after the first clip if it is expended too quickly. that is made into the game. the fastes fire rate allowable is 8.33, GBlaster, where is this 555? what is your resistance between opin two and seven?

[GBlaster]

no, socom, the reason I asked that question is because your mod is working correctly. cod5 has a cap built into the game that restricts your fire rate after the first clip if it is expended too quickly. that is made into the game. the fastes fire rate allowable is 8.33, GBlaster, where is this 555? what is your resistance between opin two and seven?

R2 is currently set at 56k ohms (about 11 shots per second). If the rate limit works the way you say it does then you can change R2 to 82k ohms which will give you about 8.2 shots per second.

I've never had any problems with the 11 shots per second though with call of duty 5 when I the game. (Note: I got it after the limit patch)

[socomhacker239]

well okay when i have time i will buy another 555timer and re try it with a 82k resistor thanks 

[lookkool3]

hey, socomhacker do you know where i can find a tut on the ps3 rapid fire mod??

[ndru98]

GBlaster made it.
Its around here somewhere....
In this section as well....
Lemme find it

EDIT:

https://www.acidmods.com/forum/index.php?topic=24921.0

[longhornsb25]

Do u still have the hex code for the chip? Can you PM it to me?

[seriouslysilly]

R2 is currently set at 56k ohms (about 11 shots per second). If the rate limit works the way you say it does then you can change R2 to 82k ohms which will give you about 8.2 shots per second.

I've never had any problems with the 11 shots per second though with call of duty 5 when I the game. (Note: I got it after the limit patch)

hey gblaster,
Just took my ds3 controller to a friend's house with cod5.  the ds3 has the 56k ohm and works fine with cod4. 
I took it to his house to test it with cod5 as I don't have it.

He says that it works for the first clip but will not after that.
you would have to wait till the next board/round to be able to use it again (first clip).

I guess I'll have to start using the 82k ohm resistors from now on.

[Modded Matt]

in place of this resistor, ue a 100k pot, that way you can play both games.

[seriouslysilly]

yeah, actually just put one on a few days ago.
working like a charm, but dn't have cod5