:censored:

[W-Gaming5]

[ra1n]

check to see if you still got the little gel thing

[Slim Hacker]

Mine is like this tryed everything still drifts and locks up at random times looks like im gonna have 2 buy a hew1

[GhoSt]

If all else fails wire from the analog contacts to the corosponding motherboard contacts. That always fixes mine.

[rceckspurt13]

Yeah just make Sure the clear rubber thing is still in place. It should be held by the LCD cage and sandwiched between it and the nub. Also make sure that it is turned the correct way. If nothing else, you may just have to solder wires from the nub to the mobo as Ghost mentioned.

[W-Gaming5]

 

[GhoSt]

How do you do that? I'll try it

Um... 4 small bits of 30awg kynar wire, solder and a soldering iron.

[phoenix_s]

try to go in "settings" and then "sstem-Settings" and then in "System-information" then it must schon with firmware you have.....

when you are in this screen make some circles with the analog stick... that could maybe help

if not try to use the plugin JOYSENS

[azhockey]

You could just try tightening the faceplate screws. That worked for me. Tighten the lower right ( when looking at the back) screw... make sure you have a small screwdriver. That worked for me when mine drifted.

[Ben.]

Mine sometimes gets stuck drifting but i just ram it from one side to the other and its fixed.. lol

[Blazinkaos]

Yea i had this issue many times either get a new gel piece and tighten the faceplate not to hard those just enough or as Ghost said hard wire it. Its much easier.

[Jumbo]

I knew this pic would be used more than once lol

[Blazinkaos]

Nice jumbo thats perfect.