Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
o mine are sound reactive
I have read a lot about people doing the sound reactive led mod. One question that has come several times is, "what is the difference between soldering the leds to one or both of the speakers simutanous." there is a difference. When you have it where both leds are on speaker, you have a mono set up. this means the leads while only react based on which speaker they are connected, left or right. This means the leds can possible dim if the channel they are connected to is the lower level channel. To fix the dimming issue, you could solder the neggitve to the left channel and the possitive to the right channel. This makes the leds stereo sound reactive and not mono. I believe I am correct on the solder points for the stereo setup, if not, feel free to correct me.