Author Topic: AcidMods Offical [Post Pictures of your PSP] Thread (Read 514558 times)

phenomenal · « **Reply #810 on:** November 19, 2007, 11:25:13 AM »

Quote from: Optix on November 19, 2007, 09:36:11 AM

Tell youre friend I will trade a Clear PSP with dual nub, and 12 Blue LEd's for his PS3 only .

lol, not sure if i can do that, although heres a little tip, when ever u meet someone incredibly dumb and really really rich, u make the most of it i tell u

Nemesis · « **Reply #811 on:** November 19, 2007, 11:41:36 AM »

Quote from: Phenomenal on November 19, 2007, 11:25:13 AM

lol, not sure if i can do that, although heres a little tip, when ever u meet someone incredibly dumb and really really rich, u make the most of it i tell u

exactly! now he has common sense, and i have a friend who's like that aswell, lol

phenomenal · « **Reply #812 on:** November 19, 2007, 11:44:20 AM »

Quote from: Nemesis on November 19, 2007, 11:41:36 AM

exactly! now he has common sense, and i have a friend who's like that aswell, lol

haha, now u try and get as much as u can off him for an incredibly low price, ask if u can buy his brother lol

anthonyta · « **Reply #813 on:** November 19, 2007, 10:51:42 PM »

mines at the top and the one i modded for my friend is at the bottom =] all on top of my lovely icemat that makes the lights show so much more

phenomenal · « **Reply #814 on:** November 21, 2007, 01:32:45 PM »

Quote from: anthonyta on November 19, 2007, 10:51:42 PM

mines at the top and the one i modded for my friend is at the bottom =] all on top of my lovely icemat that makes the lights show so much more

i had an icemat, until my bad luck striked agian (which it does every few minutes) and some wooden tiger some how jumped off my wardrobe and landed head first into it and it smashed (obviously) and thats another reason why i say everything in my life gets ruined any way it can, but enough about that, nice psps

anthonyta · « **Reply #815 on:** November 21, 2007, 01:45:42 PM »

ahah damn that sucks man.. thanks for the heads up though =] nothing is above my icemat that can fall now hehe

phenomenal · « **Reply #816 on:** November 21, 2007, 02:09:29 PM »

Quote from: anthonyta on November 21, 2007, 01:45:42 PM

ahah damn that sucks man.. thanks for the heads up though =] nothing is above my icemat that can fall now hehe

well, even if i did move it even to another country, it would of still found a way to smash it lol, im not even sure how it fell to, it was nice and sturdy, i quickly take out a chewing gum, put it in my mouth, and it tilted forward and fell, and i was like WTF!!!!!!!!!!!! has a life of its own!!!! ah well, then it landed and smashed, and thing is, it was my bros... so i got in even more deep trouble

ProperBritish · « **Reply #817 on:** November 29, 2007, 10:35:14 AM »

Here's Mine...

MARIOPARTY53 · « **Reply #818 on:** November 29, 2007, 12:08:14 PM »

Quote from: ProperBritish on November 29, 2007, 10:35:14 AM

Here's Mine...

Is it a faceplate or full case?

Fe1ipe · « **Reply #819 on:** November 29, 2007, 01:14:02 PM »

i'd say full case

ProperBritish · « **Reply #820 on:** November 29, 2007, 02:02:55 PM »

It is a full case, ill post a pic of back tomorrow

Azie139 · « **Reply #821 on:** November 29, 2007, 07:02:29 PM »

will sure look nice with some leds

TR4G- · « **Reply #822 on:** November 29, 2007, 07:55:35 PM »

Quote from: Azie139 on November 29, 2007, 07:02:29 PM

will sure look nice with some leds

ill say.....

ProperBritish · « **Reply #823 on:** November 30, 2007, 12:18:46 AM »

Here's The back

Id like some EL Wire in it, but Tec hasnt put up the tut

And I wanna change the On, Charge, Wifi and Memstick LEDs So that whats green now will be blue, and whats orange will be red.

Slimby · « **Reply #824 on:** November 30, 2007, 01:21:47 AM »

I've done that before, with the hold LED being red. Looks amazing. My customer couldn't get over it.

Slimby

ProperBritish · « **Reply #825 on:** November 30, 2007, 08:14:02 AM »

you can have a hold LED? wow, hows that work, hold doesn't normally have an LED

4dP · « **Reply #826 on:** November 30, 2007, 09:16:39 AM »

Quote from: ProperBritish on November 30, 2007, 08:14:02 AM

you can have a hold LED? wow, hows that work, hold doesn't normally have an LED

lol its very easy just wire the negative of a led to the hold contact and positive on power source using resistors if necessary and place it near hold on face plate if there's a simpler way i don't know it

ProperBritish · « **Reply #827 on:** November 30, 2007, 09:48:36 AM »

see, now you hear all these things and wonder why Sony doesn't do them

General Vergel · « **Reply #828 on:** December 02, 2007, 06:55:38 AM »

Here is my piece of awesome:

I already have a thread going with construction pics too.

sakobatoneko · « **Reply #829 on:** December 02, 2007, 08:43:41 PM »

Hi im new to acidmods. I just started modding my psp(warranty expired).

So i started with a simple mod, i change my psp faceplate. Sucks i want to do the led trigger mod on my psp but i dont know where to get the leds.
Well here is my psp:

carboycam · « **Reply #830 on:** December 03, 2007, 08:35:11 AM »

Same faceplate as mine. =P Me and my mate from school are looking to buy a cheap Phat PSP to practice modding on. Looks nice.

What Firmware are you on?

metal_death · « **Reply #831 on:** December 03, 2007, 11:24:54 AM »

Nice PSP General Vergel

Grantlionheart · « **Reply #832 on:** December 03, 2007, 12:18:48 PM »

I'm very impressed by a lot of these PSP's.
I like the White psp with the red buttons.
I noticed that many of them still had the AC bit being yellow... is that hard to disassemble and paint?
Also doesn't the LEDS in those clear case mods get annoying? Or do you just have them off most of the time. Seems kinda pointless to add them and never use them.

My psp is plain at the moment.
My old one, Well i should say my brothers old one since mine got stolen had a transparent clear case *Back & front* and thats about it, I was pretty pissed to find my bro had sold his psp considering i spent money fixing and changing out parts when it started to break :\
Im currently just using his new one that he bought at the moment but i am planning to buy someone's for 100$ It only runs when plugged into the AC and he thinks its broken.... little does he know its actually that the battery is broken xD
And since i already have a spare battery it wont be a problem :P But yeah none of you care so o well.

IndyChav · « **Reply #833 on:** December 03, 2007, 12:50:15 PM »

Mines stock with a matte black faceplate, white buttons, and frosted jewel made by me =]

my soldering iron broke so till i get a new one im pretty screwed lol
got all my parts for my new project thogh

...just waiting for one from santa

sakobatoneko · « **Reply #834 on:** December 03, 2007, 01:50:33 PM »

Quote from: carboycam on December 03, 2007, 08:35:11 AM

Same faceplate as mine. =P Me and my mate from school are looking to buy a cheap Phat PSP to practice modding on. Looks nice.

What Firmware are you on?

Quote from: metal_death on December 03, 2007, 11:24:54 AM

Nice PSP General Vergel

thanks. I have 3.71-3M33 on the phat and slim

Fe1ipe · « **Reply #835 on:** December 04, 2007, 03:07:50 PM »

reserved for my pics...

Jetsurf · « **Reply #836 on:** December 06, 2007, 12:46:56 PM »

Heres my new case (Thanks to all who helped me find a place to get it

)
http://img89.imageshack.us/my.php?image=img22551cg1vm1.jpg (Sorry Its kind of blurry)

Hope it works!
http://img135.imageshack.us/my.php?image=img22561wc7.jpg

Sorry I can't get the pictures to load in my post, can't figure out how...

*FuFa: Please hyperlink your URLs.

sakobatoneko · « **Reply #837 on:** December 06, 2007, 07:56:49 PM »

Quote from: Jetsurf on December 06, 2007, 12:46:56 PM

Heres my new case (Thanks to all who helped me find a place to get it )
http://img89.imageshack.us/my.php?image=img22551cg1vm1.jpg (Sorry Its kind of blurry) Hope it works!
http://img135.imageshack.us/my.php?image=img22561wc7.jpg

Sorry I can't get the pictures to load in my post, can't figure out how...

*FuFa: Please hyperlink your URLs.

nice psp case where you get it and how much?

mootoo · « **Reply #838 on:** December 09, 2007, 09:18:00 AM »

http://www.youtube.com/watch?v=md27e9-jz0M
this is my last project.

Thaiboy · « **Reply #839 on:** December 09, 2007, 05:29:21 PM »

I wish I could do those LED mods like that.
guess I'll just stick to spray painting for now.):
Oh, Has anyone tried dying their psps yet?
I've seen people dye wiimotes so...

News:

Author Topic: AcidMods Offical [Post Pictures of your PSP] Thread (Read 514558 times)

phenomenal

phenomenal

phenomenal

phenomenal