Author Topic: How to connect a dip switch to LEDs? (Read 5443 times)

almostPSP · « **on:** July 22, 2009, 01:59:26 PM »

I have a black PSP 1000 and i'm not sure what LED's to get... either white or blue?

Blazinkaos · « **Reply #1 on:** July 22, 2009, 02:02:56 PM »

YOu can mix it up are you doing solid or sound reactive.

noobpsphacker · « **Reply #2 on:** July 22, 2009, 02:44:46 PM »

It all depends where you're putting the LEDs. Triggers? Power/memstick? UMD Drive? /\[]XO D-Pad?

Blazinkaos · « **Reply #3 on:** July 22, 2009, 02:49:55 PM »

Well he may be new to this so he should start out with the mod that most new members take witch it the trigger mod.

bustinthejustin · « **Reply #4 on:** July 22, 2009, 03:53:15 PM »

Blue looks nice although overused.... Green actually looks amazing with black imo, but in the end it's your choice.

.MadX · « **Reply #5 on:** July 22, 2009, 03:59:17 PM »

I prefer blue but If you don't like that then I'd say white or red.

Blazinkaos · « **Reply #6 on:** July 22, 2009, 04:06:53 PM »

Quote from: bustinthejustin on July 22, 2009, 03:53:15 PM

Blue looks nice although overused.... Green actually looks amazing with black imo, but in the end it's your choice.

Yea true blue is over used.

thib1903 · « **Reply #7 on:** July 23, 2009, 02:38:46 AM »

Yellow one or Orange Are so good with a black psp ...But it depend only on your feelings ...(you just have to choice the good resistor.)I agee that blue one is over use.

Blazinkaos · « **Reply #8 on:** July 23, 2009, 01:05:33 PM »

Yea orange sounds pretty cole for black psp, Halloween style.

tapdisbong · « **Reply #9 on:** July 23, 2009, 02:41:07 PM »

mix it up with white and blue, or white an red.

ApheX · « **Reply #10 on:** July 23, 2009, 04:53:28 PM »

Quote from: tapdisbong on July 23, 2009, 02:41:07 PM

mix it up with white and blue, or white an red.

I agree, White and blue mixes really well. Not too sure about red and white, only because of the difference in power consumption. could be a pain for a new modder to sort out. I know it was for me when I first started.

Blazinkaos · « **Reply #11 on:** July 23, 2009, 05:04:36 PM »

Yea he still hasn't messaged about what color hes going do but it would be better of since hes a new modder to start off with one color.

almostPSP · « **Reply #12 on:** July 24, 2009, 02:39:56 AM »

I'm doing sound reactive LED's but i feel like doing white LED's but it might look really dull since i have a black PSP, i'm putting them in the bottom speakers and the triggers

Blazinkaos · « **Reply #13 on:** July 24, 2009, 09:25:14 AM »

OK at least you know what you want to do now do you want direct connect the leds or use the LM386.

Direct contact is were you connects the leds to the speakers of the psp.

The LM386 works as a amp giving a boost to your leds and speaker thous making you leds much brighter then direct contact.

W-Gaming5 · « **Reply #14 on:** July 24, 2009, 05:07:22 PM »

Blazinkaos · « **Reply #15 on:** July 24, 2009, 06:28:10 PM »

Oh thats an option as well.

almostPSP · « **Reply #16 on:** July 27, 2009, 11:01:05 AM »

Where can i buy a LM386?

tapdisbong · « **Reply #17 on:** July 27, 2009, 12:28:07 PM »

ebay or radioshack

W-Gaming5 · « **Reply #18 on:** July 27, 2009, 02:01:14 PM »

almostPSP · « **Reply #19 on:** August 02, 2009, 11:06:54 AM »

How would you connect a different switch like a dip switch instead of using a LM386?

News:

Author Topic: How to connect a dip switch to LEDs? (Read 5443 times)