Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
But looking at this seems you got everything one on constant line witch isnt right from what i know. They have to be separate with there own wires but with a switch to switch from one another.
so this is good?but for the umd jewel I've seen people have a line and have it work fine like in the diagram (They did lm386 but it should still work).
most people don't use resistors for green.so you don't need them
Thanks for the refferral blazin. Lolfrom what I understand, you want to put a momentary push style switch under each trigger to make them push reactive rigt?If that's the case, this original diagram isn't far off. He already has the LEDs in parallel. Only thing is, the way the diagram currently is, pushing one trigger will light them both up while pushing the other will light the umd door. Also the lights will only be on while the buttons are being pushed.OP: Let me know if I got it wron. Or missed anything. Once I know what exactly is wanted, I'll go ahead and draw you up a diagram.