Author Topic: PS3 rapid fire BY "Ack Like You Know" an acidmods member (Read 26405 times)

Modded Matt · « **on:** March 26, 2010, 12:23:01 PM »

anyone intrested in a ps3 rapid fire hex for the 12f683? I think rnd is working on something for the 12f683. I was just checking for member intrest.

here it is:
two mode:
https://www.acidmods.com/RAND/upload/files/upload/PS3_Rapid_Fire_Tutorial_NEW.zip
https://www.acidmods.com/RAND/upload/files/upload/NEW_PS3_HEX_EDITED.HEX

three mode:
https://www.acidmods.com/RAND/upload/files/upload/3_Mode_PS3_Rapid_Fire_Tutorial.zip
https://www.acidmods.com/RAND/upload/files/upload/PS3_3-Mode_RF_FINAL.HEX

rafaliyo86 · « **Reply #1 on:** March 26, 2010, 12:58:13 PM »

I am interested, i think its a great idea, i have been looking on ebay and there are some chips. There is a seller who put diagrams if it help to rnd team i could get this diagrams. Do you want?

Post Merge: March 26, 2010, 12:58:18 PM

I am interested, i think its a great idea, i have been looking on ebay and there are some chips. There is a seller who put diagrams if it help to rnd team i could get this diagrams. Do you want?

Modded Matt · « **Reply #2 on:** March 26, 2010, 01:36:54 PM »

sure post them up.

rafaliyo86 · « **Reply #3 on:** March 26, 2010, 01:57:51 PM »

Ok i will post them later when i get home

Brainstorm32 · « **Reply #4 on:** March 26, 2010, 02:36:11 PM »

Yes, I would be very interested. Bring it on.

SN!P3R · « **Reply #5 on:** March 26, 2010, 02:48:58 PM »

I would like much

Demonboy · « **Reply #6 on:** March 26, 2010, 03:19:30 PM »

im intrested.... i have more ppl locally requesting ps3 RF than 360 so ya lol.... plus i think id like to start working on the ps3

Modded Matt · « **Reply #7 on:** March 26, 2010, 03:47:41 PM »

so the next question is, should it be opensource?

Frankie.R · « **Reply #8 on:** March 26, 2010, 04:54:30 PM »

Im definetly interested ! And yes it should be open source.

Demonboy · « **Reply #9 on:** March 26, 2010, 05:01:00 PM »

opensource would be nice

but thts up to the developer i suppose

rafaliyo86 · « **Reply #10 on:** March 26, 2010, 06:02:58 PM »

I think an opensource would be the best option because we are so much who play in many games of xbox360 with the differents types of RF and would be nice can do the same with ours ps3 controllers but is a R&D team decisions

bustinthejustin · « **Reply #11 on:** March 26, 2010, 10:18:42 PM »

I'd be interested

Many of my friends have PS3s and I've been itching to stick a rapidfire into one of their controllers, but I've never really come across any that I would consider reputable. It would be great if AcidMods made one!

Demonboy · « **Reply #12 on:** March 26, 2010, 11:50:28 PM »

im same boat as justin

ExoFire · « **Reply #13 on:** April 04, 2010, 07:21:49 AM »

What exactly is it that you are looking for here? There are plenty of sellers with chips that use R1 to fire with...

Modded Matt · « **Reply #14 on:** April 07, 2010, 05:28:07 AM »

Ok Here are two rapid fire solutions for the ps3. These have no affiliation with acidmods. They were laying around the internet, and I posted them here so they can be available to our members. I have never even tested them. let me know what you think. RnD will continue to work on rapid fire without tactile switches, but due to the complexity of the sony design, amount of different controller types, and lack of resources it is a slow ongoing process.

**EDIT*** these codes were provided to acidmods by Jason ackley, some of you may know him as "Ack Like You Know"

two mode:
https://www.acidmods.com/RAND/upload/files/upload/PS3_Rapid_Fire_Tutorial_NEW.zip
https://www.acidmods.com/RAND/upload/files/upload/NEW_PS3_HEX_EDITED.HEX

three mode:
https://www.acidmods.com/RAND/upload/files/upload/3_Mode_PS3_Rapid_Fire_Tutorial.zip
https://www.acidmods.com/RAND/upload/files/upload/PS3_3-Mode_RF_FINAL.HEX

nathd · « **Reply #15 on:** April 12, 2010, 05:02:57 PM »

I'm 99% installed with the 3 mod version here. I'm just thinking before closing my controller, could I have both an R1 and an R2 wired as follows. Instead of 1 wire on pin 7, have 2 going to two seperate tacts, from each leading to their own transistor sharing R common but one on R1 and one on R2.

Ack Like You Know · « **Reply #16 on:** April 13, 2010, 08:18:36 AM »

My 3 Mode Rapid Fire Tutorial!! Hooray!! Wondering where the hex came from though. I've made a little editing to it since this tutorial to align the pins better and cut down on wires.

Modded Matt · « **Reply #17 on:** April 13, 2010, 09:46:58 AM »

these are yours Jason, and are stored on the AM server for archiving. Thank You for sharing this with the world.

Ack Like You Know · « **Reply #18 on:** April 13, 2010, 10:53:27 AM »

Enjoy!! Mode 1 is 8 sps, mode 2 is 10.5 cod5 compatible, mode 3 is 20 sps. I might just set up a small diagram with the new hex that cuts down on the wiring and improves pin spacing.

Modded Matt · « **Reply #19 on:** April 13, 2010, 10:55:16 AM »

anything you want to do would be greatly appreciated. let me know and I will host your information on the AM server as I did with these tuts and hex files.

Ack Like You Know · « **Reply #20 on:** April 13, 2010, 11:18:31 AM »

You may want to remove the 2 mode. It's basically usesless except with cod5. The 3 mode works with all cod titles.

Post Merge: April 13, 2010, 11:45:44 AM

You may just wanna clean this up a bit. Make your post with the codes/tuts the first post and get rid of these messages that are correspondence between us. That way, it makes it easier to find the codes. I'll just pm you from now on with any changes.

OpTiCz · « **Reply #21 on:** April 23, 2010, 02:24:04 PM »

Seems to work really well.
Can you tell me how I might wire it so I can use the trigger itself and not the rapid button?
Since I can turn it off and on, this would make the most sense.

Thanks,
Mike.

Ack Like You Know · « **Reply #22 on:** April 23, 2010, 05:45:24 PM »

You can't with this code. I can tweak the code to make it R1, but I don't have the knowledge to do so. ExoFire seems to know how, but like to squirrel it away. Seeing as though I haven't sold a single rapid fire kit in almost 6 months and released my hex for free, he still seems to wanna hide the knowledge.

OpTiCz · « **Reply #23 on:** April 23, 2010, 05:56:05 PM »

Hazer's sleeper mod worked really well on my Xbox, maybe we can get his input....

Hazer · « **Reply #24 on:** April 23, 2010, 07:17:54 PM »

The Xbox controller was a simple potentiometer wiper that could be voltage driven easily enough. If the wiper went one way when you pressed teh trigger, you could force the voltage back to the 'released' state.

The PS3 is not a potentiometer. Every button is pressure sensitive, and has analog voltage. This is not what stops people. The problem is that the entire controller is a matrixed analog controller. It uses the common line to pulse each analog button in sequence to read its variable state. If the PIC tries to force the voltage, it will do so to all the button on that common line. This is why people need to use a transistor to manipulate the buttons. But I am looking into it.

Ack Like You Know · « **Reply #25 on:** April 24, 2010, 04:32:54 AM »

Thanks Hazer. What people are doing, just as a tip, seems to be they are only hooking up the single wire to the "R common" spot and it seems to only trigger the "R1" button (those who are doing it right). I'm wondering if there's a way to tell "R common" to only allow the pulse through if "R1" is pulled. Like put a hold or something on the pulse until the signal from R1 comes through R common.

Demonboy · « **Reply #26 on:** April 25, 2010, 01:23:13 AM »

whats the lil componenants called tht only allow flow of energy in 1 direction? im sry its been a long day and i aint slept in like 4... maybe u could use those lil thingys lol

laxboy · « **Reply #27 on:** April 25, 2010, 06:55:37 AM »

i belive your your thinking of diods

Bakke · « **Reply #28 on:** April 26, 2010, 11:19:30 AM »

I'm new to pic's and just wondering for the PS3 what pic do I need to use and do I need to program it and if so can someone post the code plz thanks.

Modded Matt · « **Reply #29 on:** April 26, 2010, 12:28:41 PM »

the chip is a 12f683. the code is posted in reply #14 above.

News:

Author Topic: PS3 rapid fire BY "Ack Like You Know" an acidmods member (Read 26405 times)