Author Topic: Clear Analog LED Mod (Read 13183 times)

i7vSa7vi7y · « **on:** April 26, 2011, 08:47:27 PM »

Thought i would share my recent mod with the acidmods community
Tell me what you think.

http://www.youtube.com/watch?v=ZWrU6Q9vRgw

Crumbz · « **Reply #1 on:** April 26, 2011, 10:49:00 PM »

nice mod! did you install rapid fire on there too?

sorry if you said you did, I didn't finish watching the video.

i7vSa7vi7y · « **Reply #2 on:** April 27, 2011, 05:23:40 PM »

I did at one point but didnt like the chip so i changed the button for 0 button so i can have a COD drop shot button.
Comes in handy. Also theres more leds hooked up for the rumble motors.

Crumbz · « **Reply #3 on:** April 27, 2011, 09:42:48 PM »

nice!

FOOKz™ · « **Reply #4 on:** April 27, 2011, 09:48:08 PM »

I like the LED rumble effect

joeb0032 · « **Reply #5 on:** April 27, 2011, 11:23:11 PM »

Correct me if im wrong, but im almost sure you just hook positive wire to led up to the duelshocks positive pad. and the negative line to led to any negative source. (besides the duelshocks negative pad) to cause that effect

1TONpete · « **Reply #6 on:** April 28, 2011, 08:07:21 AM »

Nice job.
Ive been looking for clear analogs . Where did you find them? I was going to try some xbox analogs and see if they would work.

whitetop · « **Reply #7 on:** April 28, 2011, 02:04:11 PM »

den you will find some on ebay but ive not got that much money to waste on what some are asking

nEoVaLoR · « **Reply #8 on:** April 28, 2011, 03:11:49 PM »

that is pretty awesome... i like, i like.

i7vSa7vi7y · « **Reply #9 on:** April 28, 2011, 06:34:25 PM »

Thanks for the feedback guys and for the rumble effect i just soldered positive and negative directly to LEDs.
And yeah get clear analogs from ebay or google around. There hard to find. They will be on ebay one day then off another

1TONpete · « **Reply #10 on:** April 28, 2011, 06:39:49 PM »

Do they look like they were molded from one piece ? I'm thinking I might try to mold my own.

i7vSa7vi7y · « **Reply #11 on:** April 30, 2011, 07:48:44 PM »

Yeah there molded from one piece.
If you mold some clear ps3 buttons ill buy them from you

loboplayero · « **Reply #12 on:** April 30, 2011, 10:09:19 PM »

i like it!! nice work.

1TONpete · « **Reply #13 on:** May 01, 2011, 06:22:18 AM »

i7vSa7vi7y-" Yeah there molded from one piece.
If you mold some clear ps3 buttons ill buy them from you"
When I do the mold for my mp3 controller Ill make nubs and buttons. Thanks for the info. only problem with the buttons is I can just make a mold of one button and reuse for the rest, each one is different. Ill let you know when they are ready. I'm sure there will be a thread on the clear button mold making.

802Chives · « **Reply #14 on:** May 01, 2011, 09:15:10 AM »

contact king mike at AM shop for clear analogs... hes got the stash PS3 and xbox360 in quite a few colors

whitetop · « **Reply #15 on:** May 01, 2011, 11:20:59 AM »

how much you think he will ask for them chives?

joeb0032 · « **Reply #16 on:** May 03, 2011, 02:25:28 PM »

Quote from: denali31004 on May 01, 2011, 06:22:18 AM

i7vSa7vi7y-" Yeah there molded from one piece.
If you mold some clear ps3 buttons ill buy them from you"
When I do the mold for my mp3 controller Ill make nubs and buttons. Thanks for the info. only problem with the buttons is I can just make a mold of one button and reuse for the rest, each one is different. Ill let you know when they are ready. I'm sure there will be a thread on the clear button mold making.

I'd also be interested for sure

1TONpete · « **Reply #17 on:** May 03, 2011, 05:48:10 PM »

Well since I see people want clear PS3 nubs , I'll try making a mold for them tomorrow.

whitetop · « **Reply #18 on:** May 03, 2011, 06:06:38 PM »

i have a mold for the whole controller just cannot get any of the stuff to make what i want lol

if you do make some how much you asking?

1TONpete · « **Reply #19 on:** May 03, 2011, 08:46:52 PM »

we'll see Whitetop. Your in the UK tho so shipping will be more than the cost of the analogs i presume .

whitetop · « **Reply #20 on:** May 04, 2011, 04:36:48 AM »

not really i get stuff from the usa a few times a year and barley comes to 3$ shipping but hey its ok if i can get the stuff cheaper here ill make some

1TONpete · « **Reply #21 on:** May 04, 2011, 10:03:25 AM »

any special requests for the clear stuff ? I'm getting ready to mold. making clear nubs and buttons.
if anyone wants colors let me know before the end of the week.

Crumbz · « **Reply #22 on:** May 04, 2011, 10:40:07 AM »

you have a mold for a PS2 controller?

1TONpete · « **Reply #23 on:** May 04, 2011, 11:40:24 AM »

No ps2 molds ready. I don't think I have any ps2 controllers around either.

whitetop · « **Reply #24 on:** May 04, 2011, 11:47:52 AM »

i think there the same size as ps3 bits ill check for you

edit there same size but the bottom of the buttons are differ

1TONpete · « **Reply #25 on:** May 04, 2011, 01:35:10 PM »

I could possibly do a ps2 from a ps3 mold.
note to self: I should have molded the PS3 controller before I started building the MP3 controller.
So I will be doing a clear PS3 controller mold but I don't know when. Since my spare controller is what I'm using for the MP3 controller and has already been modified , I can't use that one to make a mold from. If someone has a controller shell I can borrow until the mold is made , that would be a big help. The mold takes a couple days to dry completely so I don't want to take my main controller out of commission for that long.
he who comes up w a shell gets free buttons and shell. Pm me if you can help.

whitetop · « **Reply #26 on:** May 04, 2011, 01:53:48 PM »

i would send a spare controller as i have 6 lol but im in uk so dont think it can get to you in time

1TONpete · « **Reply #27 on:** May 04, 2011, 02:49:11 PM »

Ill probably have use my main one thats all. after shipping and everything it would be easier. I should clean it and maybe paint it while I got it apart.

i7vSa7vi7y · « **Reply #28 on:** May 08, 2011, 04:38:32 PM »

Whenever you get those clear buttons im for sure interested just PM me or hit me up on utube.
Appreciate it. Also good luck on your mod.

1TONpete · « **Reply #29 on:** May 08, 2011, 07:24:35 PM »

updating all my projects. this one included. Had couple problems with the molds the first batch. Remaking molds. I rushed it to much. I should know better and slow down when making stuff like this. Give me some time, I should have new molds done by the end of the week. Funny thing is I was worried about the r2/l2 mold but that one came out fine.

News:

Author Topic: Clear Analog LED Mod (Read 13183 times)