« previous next »
Pages: [1]   Go Down

Author Topic: What watt iron does everyone use?  (Read 4687 times)

Offline MrPete1985

  • Registered BST
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +6/-0
  • Gender: Male
  • Acidmods User
What watt iron does everyone use?
« on: February 22, 2012, 06:07:06 PM »
I'm wondering what watt iron people use to solder to the Xbox motherboard my weller 12 watt is fine for DVD-ROM boards and what not but just won't do the trick on Xbox motherboard
Logged

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Moderator
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: What watt iron does everyone use?
« Reply #1 on: February 22, 2012, 06:10:36 PM »
12watt should be fine , I use a 15watt or 25watt but , i got some experince with a iron
« Last Edit: February 22, 2012, 07:03:16 PM by Rodent »
Logged

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline nEoVaLoR

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: What watt iron does everyone use?
« Reply #2 on: February 22, 2012, 06:21:20 PM »
I've always used 30 watt.. I don't understand how people can burn SMT components with it, but It does the job for me
Logged

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: What watt iron does everyone use?
« Reply #3 on: February 22, 2012, 06:39:17 PM »
mine has a switch from 15-30 but the xbox mobo is a pain anyway, add flux and solder then try to desolder what your working on.


the new solder helps heat the stuff MS uses
Logged

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: What watt iron does everyone use?
« Reply #4 on: February 22, 2012, 06:44:00 PM »
I find the best to use is a 35 watt iron. Make sure you use plenty of flux too. Soldering to the 360 mobo is a pain because of the lead free solder.
Logged

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: What watt iron does everyone use?
« Reply #5 on: February 22, 2012, 06:58:44 PM »
15w with plenty of flux is safe
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline Aggressive Mods

  • Motor Mouth
  • *
  • Posts: 76
  • Post quality +4/-3
  • Gender: Male
  • Aggressive Modz
Re: What watt iron does everyone use?
« Reply #6 on: February 22, 2012, 07:19:07 PM »
15 watt for me.  :hifive:
Logged

Offline PsychoticWolf

  • C.H.A.O.S Where art Thou.
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 2045
  • Post quality +27/-0
  • Gender: Male
  • Team CYBER
Re: What watt iron does everyone use?
« Reply #7 on: February 22, 2012, 07:52:21 PM »
Logged

For the awesome Sigs Thanks goes to: Blazinkaos, Chef Boyardee
O o
/¯/________________________/
{ IMMA FIRIN' MA LAZAAAAAR!!!!!!
\_\¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯\
RyanF: lol im not that sick.  I don't feel like licking the s*** off a 40 year old guy's ass
RyanF: you want me to lick your crusty old buns dont you?
2/20/2012 at 08:55:34 PM

Offline MrPete1985

  • Registered BST
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 59
  • Post quality +6/-0
  • Gender: Male
  • Acidmods User
Re: What watt iron does everyone use?
« Reply #8 on: February 22, 2012, 08:39:11 PM »
Not trying to remove anything right now but last time I did a 12v fan mod the solder on the underside of the power plug just did not want to melt, eventually I got some solder on it but it looked like :censored:.  I did get a 25 watt iron recently from a friend that never used it so next time I'll give that one a shot
Logged

Offline Sammy

  • BST BAN
  • Granny Spanker
  • *
  • Posts: 393
  • Post quality +15/-1
  • Gender: Male
Re: What watt iron does everyone use?
« Reply #9 on: February 22, 2012, 08:51:33 PM »
I use a 25 watt, and i couldnt get it to melt either, i did the same thing with the fan, and it looked like crap
Logged


Toad: Sam, You sound like your stoned out of your mind lol
Me: :D

Offline Nevbox

  • Granny Spanker
  • *
  • Posts: 356
  • Post quality +12/-5
Re: What watt iron does everyone use?
« Reply #10 on: February 23, 2012, 07:46:18 AM »
Good British Antex CS18.
Logged

Offline FOOKz™

  • Hardware Modder
  • Research & Development
  • E = MC² Mad Scientist
  • *
  • Posts: 2070
  • Post quality +37/-2
  • Electronics Expert Electrical Engineer
Re: What watt iron does everyone use?
« Reply #11 on: February 23, 2012, 12:18:41 PM »
I have a Weller WES51 50Watt adjustable station i use for whatever. Works well for desoldering anything
Logged

Follow my Instagram and subscribe to my YouTube

Offline Hazer

  • x4675636B4E7574
  • Acidmods Alumni
  • Acid Modder
  • *
  • Posts: 583
  • Post quality +59/-0
Re: What watt iron does everyone use?
« Reply #12 on: February 23, 2012, 07:51:48 PM »
I have bought 2 of these (one for me, one for a friend):

http://www.circuitspecialists.com/soldering-stations-csi-station1a.html

It works just as well as the Hakko I had at work. I have used mine for 4 years without problems, and I still cant believe the price. Its almost the same price as a generic 30 watt from RadioShack.
Logged
[Quote from Gamermodz via Viking forums]
Don't be jealous your not half as smart. I hate ****tards like you. An ignorant redneck. Your nothing but a posing ******. Get the **** out of here, really, your claim to fame is an open source rapid fire code? You make me laugh. You think you have control over the modding market?  You couldn't create what I can and do. You are too ignorant with your outrageous assumptions and accusations. [/Quote]

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: What watt iron does everyone use?
« Reply #13 on: February 23, 2012, 08:24:16 PM »
I have a 20+ year old 50w weller soldering station that belonged to my dad. I will hopefully get a smd rework station sometime this year.
Logged
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline toadzilla

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 997
  • Post quality +132/-0
  • Gender: Male
  • something something Tech support
Re: What watt iron does everyone use?
« Reply #14 on: February 23, 2012, 09:06:18 PM »
Quote from: Hazer on February 23, 2012, 07:51:48 PM
I have bought 2 of these (one for me, one for a friend):

http://www.circuitspecialists.com/soldering-stations-csi-station1a.html

It works just as well as the Hakko I had at work. I have used mine for 4 years without problems, and I still cant believe the price. Its almost the same price as a generic 30 watt from RadioShack.
thats 29.95 right that extra 0 threw me off
Logged

Offline Kool1zero

  • Code Monkey
  • Registered BST
  • Motor Mouth
  • *
  • Posts: 99
  • Post quality +5/-0
  • Gender: Male
  • Computer, Electrical, and Network Engineering Stud
Re: What watt iron does everyone use?
« Reply #15 on: February 23, 2012, 09:20:37 PM »
« Last Edit: February 23, 2012, 09:24:24 PM by koolone0 »
Logged
Stolen from f00kz

Offline Marcheslav

  • Guppy
  • *
  • Posts: 1
  • Post quality +1/-0
  • Gender: Male
  • Acidmods User
Re: What watt iron does everyone use?
« Reply #16 on: February 24, 2012, 09:54:03 PM »
I have the same one as fookz, I love it. I also use a cheapo desoldering pump from radioshack.
Logged

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: What watt iron does everyone use?
« Reply #17 on: February 27, 2012, 06:32:38 AM »
80w, with temp set to 350C, add leaded solder then its a dream to solder to the xbox's mobo
Logged

Offline Luigus

  • Who Farted ???
  • *
  • Posts: 219
  • Post quality +6/-3
  • Gender: Male
  • PSP-Direct Team
Re: What watt iron does everyone use?
« Reply #18 on: February 27, 2012, 10:34:59 AM »
I use a 50W Magnum 2004 Temp controlled Iron, set between 250-300 degrees

Ps: got it second hand though, saw it in the shops for about 210$
---> http://www.magnumproducts.co.za/2004.html
« Last Edit: February 27, 2012, 10:45:46 AM by Luigus »
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal