Author Topic: Few questions before I start modding  (Read 2527 times)

Offline akomismo01

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
  • prOudLy PiNoy!..
Few questions before I start modding
« on: June 07, 2012, 07:20:04 AM »
Hi guys! I'm back for a very long time, Im going to mod a psp 200 slim now with jewel, I have a couple of questions:

  • What voltage does the backlight of the PSP have (Planning to put the backlight of the LCD at the UMD door
  • Is it safe to use a copper wire? (The very thin ones? It is somewat plated with something i do not know so it protects the circuit)
  • Is there any 3v pinout on the slim? If not, what resistors do I need for a 5 white leds?

THanks in advance guys!

Boooh Yah!

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Few questions before I start modding
« Reply #1 on: June 08, 2012, 05:41:14 AM »
welcome

I do not understand your BL question
no, do not use magnet wire.
here are the pin outs https://www.acidmods.com/forum/index.php/topic,28586.0.html, use a resistor calculator to determine what resistor you need.
have fun

Offline akomismo01

  • Ω Allumnist Ω
  • *
  • Posts: 142
  • Post quality +0/-0
  • Gender: Male
  • prOudLy PiNoy!..
Re: Few questions before I start modding
« Reply #2 on: June 08, 2012, 07:09:28 AM »
welcome

I do not understand your BL question
no, do not use magnet wire.
here are the pin outs https://www.acidmods.com/forum/index.php/topic,28586.0.html, use a resistor calculator to determine what resistor you need.
have fun

I mean, the backlight. My LCD broke so i took it out and had an idea to reuse the backlight of the LCD. How much voltage does it need to run?

May I also ask if SMD fuses are safe so that if i shorted out something, my MOBO is safe?

This one is a 2amp smd fuse
http://www.ebay.ph/itm/10Pcs-Littelfuse-SMD-0603-2A-2-Amp-Fuse-/180599475307?pt=LH_DefaultDomain_0&hash=item2a0c914c6b#ht_1411wt_907

This one is a 1amp smd fuse
http://www.ebay.ph/itm/10Pcs-Littelfuse-SMD-0603-1A-1-Amp-Fuse-/170579403087?pt=LH_DefaultDomain_0&hash=item27b753214f#ht_1469wt_907

This one is a 0.5amp smd fuse
http://www.ebay.ph/itm/10Pcs-Littelfuse-SMD-1206-0-5A-0-5-Amp-Fuse-/170578137880?pt=LH_DefaultDomain_0&hash=item27b73fd318#ht_1701wt_907

Which would work on the psp?
« Last Edit: June 08, 2012, 07:14:15 AM by akomismo01 »

Boooh Yah!

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Few questions before I start modding
« Reply #3 on: June 14, 2012, 05:19:38 PM »
I would not use sad resistor free formed in side the psp. You can but it may give you headache in the long run. I use 1/8w through hole resistors and a small piece of heat shrink tubing.

Good luck post pics

Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal