« previous next »
Pages: [1]   Go Down

Author Topic: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)  (Read 4520 times)

Offline MikesPenus

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« on: August 17, 2012, 08:44:53 AM »
Alright so... my psp go is messed up i bought it off some guy who can lmb. But its chill cuz trying to Fix it keeps me busy but i cant figure out the problem, it doesnt seeM like its the battery nor is it bricked because it opened a few times then died out after Like 10 seconds. doesnt do that nomore, thing is i open up the back and under the battery there's to silver boxes covering something so i apply pressure on that and the green light stays on as i apply pressure which is freakin' awesome because it gives me hope. but as soon as i remove fingers green light is gone and if i apply the right amount of pressure im sure it will turn on until i let go... but point is wheres the problem how can i fix it and if u wanna see a video of it let me know, help is greatly appreciated
Logged

Offline mario_99

  • Who Farted ???
  • *
  • Posts: 216
  • Post quality +5/-3
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #1 on: August 17, 2012, 11:41:33 AM »
Quote from: MikesPenus on August 17, 2012, 08:44:53 AM
Alright so... my psp go is messed up i bought it off some guy who can lmb. But its chill cuz trying to Fix it keeps me busy but i cant figure out the problem, it doesnt seeM like its the battery nor is it bricked because it opened a few times then died out after Like 10 seconds. doesnt do that nomore, thing is i open up the back and under the battery there's to silver boxes covering something so i apply pressure on that and the green light stays on as i apply pressure which is freakin' awesome because it gives me hope. but as soon as i remove fingers green light is gone and if i apply the right amount of pressure im sure it will turn on until i let go... but point is wheres the problem how can i fix it and if u wanna see a video of it let me know, help is greatly appreciated
upload a video so i can see what your talking about i might be able to help
Logged

Offline MikesPenus

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #2 on: August 17, 2012, 02:07:47 PM »
Quote from: mario_99 on August 17, 2012, 11:41:33 AM
upload a video so i can see what your talking about i might be able to help
http://youtu.be/3e_u1Pq3qvI

THERE IT IS
« Last Edit: August 17, 2012, 02:10:44 PM by MikesPenus »
Logged

Offline nEoVaLoR

  • Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #3 on: August 17, 2012, 05:24:04 PM »
Quote from: MikesPenus on August 17, 2012, 02:07:47 PM
http://youtu.be/3e_u1Pq3qvI

THERE IT IS

There's either a short or needs a reflow.  When you're pressing that silver thing, you are applying pressure to either a chip that has become disconnected with the motherboard, or pushing something conductive out of the way that is shorting. You can remove that shield.
Logged

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #4 on: August 17, 2012, 06:35:51 PM »
yes sir remove that shield and check it out
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline MikesPenus

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #5 on: August 18, 2012, 07:42:59 AM »
how would i reconnect whatever is lose?
Logged

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #6 on: August 18, 2012, 07:54:24 AM »
remove the shield and check it out we cant help you until you show us something we dont know at this point if its an easy or hard fix
try and get some good video a clear pic of the area under that shield
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline MikesPenus

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #7 on: August 18, 2012, 08:32:49 AM »
http://imgur.com/av8iD&PqEcw&CPmI1

its not turnin on no more ( not bricked)
BTW I APPRECIATE THE HELP WETHER ITS FIXED OR NOT ITS GREATLY APPRECIATED*
« Last Edit: August 18, 2012, 08:33:52 AM by MikesPenus »
Logged

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #8 on: August 18, 2012, 08:42:13 AM »
figured thats what was under the shield
id get me some no clean flux very cheap locally or on fleabay not req but helpful
get a dropper drip some flux under that chip and give it a very simple reflow using a heat gun if you dont have a hot air machine
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline MikesPenus

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #9 on: August 18, 2012, 08:53:29 AM »
how can you see the problem? im not questioning your knowledge i just like to know why im doing something when doing it so i can properly applie it to other things
and my dad has a heat gun how long should i use it for and how far from the psp go
Logged

Offline 3D0kassiah

  • Acid Modder
  • *
  • Posts: 809
  • Post quality +19/-2
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #10 on: August 18, 2012, 09:51:17 AM »
well if you were  applying pressure to that area you were making contact to the connections underneath  chips like that make
it hard to work with when you dont have the proper equipment like a hot air machine thats where a good old heat gun comes into play so you can heat it up enough so that the solder under the chip could make a connection again same concept when it comes to xbox rrod fixes etc
or
maybe maybe something in that general area isnt making connection due to a cold solder joint ps i wouldnt recommend you keep messing with it since it can cause a short resulting in blown cap resistors etc or whatever is on the board
if you wanna try it set it to low heat and give it a circular motion to that general area for about maybe 5 secs give or take just need to get it hot enough so it can melt the solder remember to remove the battery etc make sure not to bump it or move it while its hot because that might result in other things moving around

hell you can even use your gf or moms blow dryer used a blow dryer before on boards with high risk of fn things up and worked perfect
« Last Edit: August 18, 2012, 09:53:37 AM by 3D0 »
Logged
Tracey: f off Rodent
rodent:i would of flew it to bill gates and shoved it up his a$$

Offline MikesPenus

  • Guppy
  • *
  • Posts: 6
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PSP GO WONT OPEN F. ANY IDEAS ON WHERE THE PROBLEM IS (NO CFW)
« Reply #11 on: August 19, 2012, 06:15:43 AM »
doesnt turn on at all no more did i blow something ? and theres no fix to that is there x.x
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal