ok guys been awhile since i did any work on consoles etc crap load of fam problems at the moment
i ended up getting a ps3 phatty but it had a ylod no biggie i only paid 20 bucks for it
so i opened this sucker up and to my surprise the blu ray drive connector the little brown part that keeps the ribbon in place on the motherboard itself
was hot glued down i removed the glue using a blow dryer
did a simple reflow and reglued the brown part on and once booted it had 3,55 ofw on it....i know sweet right...
but since then the thing is giving me a ylod again kinda understandable since i used cheap thermal paste
or maybe its because i used hot glue to keep the ribbon back on like the previous person did?
well one whats the best thing i can do to try and fix the connector?
or what about using kapton tape to hold the ribbon and connector into place since that tape can withstand a good amount of heat i mean the blu ray drive worked perfect
what other things i can i do to keep this sucker cool or any other trick i can do to semi keep it from ylod again?