Author Topic: TX Coolrunner 3 Lite  (Read 1854 times)

Offline Phantom

  • Club AM VIP
  • Granny Spanker
  • *
  • Posts: 355
  • Post quality +11/-1
  • Gender: Male
TX Coolrunner 3 Lite
« on: August 20, 2012, 04:34:07 AM »


Team Xecuter have just announced their new glitch chip CR3 Lite, its bigger and better and now supports Corona v1 boards, built into the board are the addons that before you had to purchase separately (multi cap addon, CPU RST cleaner). There will also be a Pro version that includes much higher tuning functions and the new Rater feature...


http://team-xecuter.com/

Summer is almost over and pretty much all of our staff have taken their summer vacations and are back working on our new CR3 range of RGH addons.

The first to be launched is the new CR3 Lite which has taken over from the now discontinued CoolRunner Rev C. There were so many inferior copies that we felt it needed a good upgrade with all of the latest fixes and tweaks (we've included the PLL_BYPASS Multicap Addon, CPU_RESET Cleaner Addon, Corona QSB Upgrade, Added an upgraded CPU_RESET UF.L Micro Connector and more)


FEATURES:

    Brand new design from the all new CR3 Range !
    Next-Gen RGH Circuit - Embedded All Current Fixes & Tweaks
    Quality Assured - No Cheap Chinese Knocks-Offs
    New RGH1 PLL_BYPASS Cleaner Switches (680pF, 150pF, 100nF, 68nF, 47nF Caps)
    New RGH1 & RGH2 CPU_RESET Cleaner Switches (1k, 2k, 3.3k Resistors and 470pF, 560pF 680pF Caps)
    New Corona Support - High Quality Branded 48.000Mhz Crystal (No cheap quality knock offs - gives higher performance)
    New UF.L / UMCC Connector for CPU_RESET (Includes Ground - Plug In Adapter No Soldering to the CR3 Lite required)
    New 50 Ohm Micro Double Shielded & Grounded CPU_RESET Cable (Only 1.53mm and up to 6Ghz passband)
    New Built In ROL Option (Show Debug LED On Front Panel Ring Of Light)
    Built-in Ribbon Cable Connector For DemoN (Includes CR_EN and XSVF Programming - no soldering or wires)
    Enable/Disable C15 Jumper
    Enable/Disable 10 Ohm Jumper
    Unique design - do not confuse with other brands that have copied the public schematics
    Optimized timing for each motherboard version
    Easy programming via JTAG
    JTAG CK3 Power Plug Included for LPT (JP4)
    Power LED
    Reset Cycle Debug LED
    Easy Install (Includes All Wires)
    Works perfectly with the world famous NANDX, J-R Programmer & DemoN
    QSB Add-Ons Available
    Trusted Team Xecuter Design & Warranty


 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal