Author Topic: PS3 rapid fire BY "Ack Like You Know" an acidmods member  (Read 26434 times)

Offline eduunlimited

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #30 on: June 17, 2010, 10:10:12 PM »
Does anyone tried the 3-MODE of this code in COD5 & COD4 ?

I tried it on COD: MW2 and works fine, but I don't own the other two titles.

I'm just asking because I have friends interested in getting a rapid fire mod on their controllers.

I take this as a hobby, as I don't have much time to make fully researches on this things.

I have programmed a PIC 12F683 with the 3-MODE code.

Any reply will be appreciated.

Thanks.

Offline Ack Like You Know

  • Ω Allumnist Ω
  • *
  • Posts: 141
  • Post quality +0/-0
  • Gender: Male
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #31 on: June 18, 2010, 10:38:32 AM »
I made the mod. Mode 1 is for COD4/COD6, Mode 2 has the patch update for COD5 so you can fire at 10.5 sps online without being blocked.

Offline Drummist

  • Chief squatting Hard
  • *
  • Posts: 20
  • Post quality +0/-0
  • Gender: Male
  • New modder
Re: ps3 rapid fire
« Reply #32 on: August 25, 2010, 06:33:36 PM »
Ok Here are two rapid fire solutions for the ps3. These have no affiliation with acidmods. They were laying around the internet, and I posted them here so they can be available to our members. I have never even tested them. let me know what you think. RnD will continue to work on rapid fire without tactile switches, but due to the complexity of the sony design, amount of different controller types, and lack of resources it is a slow ongoing process.


**EDIT*** these codes were provided to acidmods by Jason ackley, some of you may know him as "Ack Like You Know"


two mode:
https://www.acidmods.com/RAND/upload/files/upload/PS3_Rapid_Fire_Tutorial_NEW.zip
https://www.acidmods.com/RAND/upload/files/upload/NEW_PS3_HEX_EDITED.HEX


three mode:
https://www.acidmods.com/RAND/upload/files/upload/3_Mode_PS3_Rapid_Fire_Tutorial.zip
https://www.acidmods.com/RAND/upload/files/upload/PS3_3-Mode_RF_FINAL.HEX

Is there any update on this as I have all the components needed to build this but do not want 2 tactile switches.

I'm happy to have a switch to change mode but do not want a seperate button for fire (rapid fire - R1)

I am looking into putting further tactiles in to take over from other buttons at some point but want the rapid fire functioning 1st.

Any Help would be greatly appreciated.


Thanks.

Get your own Gamercard Sig.

Offline geraldrubalcava

  • E = MC²
  • *
  • Posts: 351
  • Post quality +15/-3
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #33 on: August 25, 2010, 08:25:49 PM »
if there is any testers, coder or people who can add info, we need people! there is an open source code were trying to get off the ground. if anyone is interested here is the thread

https://www.acidmods.com/forum/index.php/topic,37158.30.html

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: ps3 rapid fire
« Reply #34 on: August 26, 2010, 12:41:32 AM »

Is there any update on this as I have all the components needed to build this but do not want 2 tactile switches.

I'm happy to have a switch to change mode but do not want a seperate button for fire (rapid fire - R1)

I am looking into putting further tactiles in to take over from other buttons at some point but want the rapid fire functioning 1st.

Any Help would be greatly appreciated.


Thanks.

soz gaz.... no update on these code's as act is no longer a active member but there is currently a open source project in the making as gerald has said he is in need of testers....
if there is any testers, coder or people who can add info, we need people! there is an open source code were trying to get off the ground. if anyone is interested here is the thread

https://www.acidmods.com/forum/index.php/topic,37158.30.html

also bumping old topics is generally not accepted check the dates before posting new post's on old topics..... anything over a month old (from the last post) is considerd a bump... its no biggy. :) spurg  :tup:

generally...however due to the nature of this post (freeware code) I would not frown upon it. we would not frown upon someone asking about one of tos or hazers codes...this one should be treated the same.
« Last Edit: August 26, 2010, 04:48:51 AM by modded matt »

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline Rodent

  • XBOX,XBOX360,PS3,WII
  • Acidmods Alumni
  • Around the block
  • *
  • Posts: 2983
  • Post quality +75/-5
  • Gender: Male
  • MODDER, REPAIR, CUSTOM IDEAS.
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #35 on: September 01, 2010, 09:56:59 PM »
As a matter of fact I am trying to set up a PS3 dual shock controller now, just finshed a xbox 360 one, I am new at this and am catching on pretty fast, yet  not as good as the guys on here. Would much appreciated if you could get a hex and maybe some tutorials on how to wire the control . Thanks! 

 Tracey: I cant believe Rodent of all people made my damn day
3D0: snacks cartoons and naps  lol sounds like rodents typcial day :rofl:
Rodent consoles mods

Offline lecrack65

  • ½ Pint
  • *
  • Posts: 37
  • Post quality +1/-1
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #36 on: April 23, 2011, 05:19:57 AM »
hello to all
I'd like to install the rapid fire on my Sixaxis controller dualschock3
This is the version msu_vx4
or is the spot weld R1 / R2 / R COMMON / POWER POINT PLEASE
can you give me a detailed diagram please

Offline lecrack65

  • ½ Pint
  • *
  • Posts: 37
  • Post quality +1/-1
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #37 on: April 24, 2011, 10:17:16 AM »
hello to all
here I just changed the schema to be able to shoot with R1
it works perfect but I do not know if there is a risk to stick with this configuration
thank you to tell me if it's good!
« Last Edit: April 24, 2011, 11:24:37 AM by lecrack65 »

Offline Ack Like You Know

  • Ω Allumnist Ω
  • *
  • Posts: 141
  • Post quality +0/-0
  • Gender: Male
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #38 on: April 27, 2011, 11:57:30 AM »
Wow, haven't been on here in a long time.

I programmed the code using "pulses" so I don't know if it will work with lecrack65's wiring. Try it out. If it does, fantastic. The rest of the wiring is stable. My only concern with it is that it'll make every button on the right side "rapid"

Offline joeb0032

  • $$$$
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 57
  • Post quality +1/-0
  • Gender: Male
  • WTF
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #39 on: April 27, 2011, 01:03:28 PM »
Act. you think you could maybe edit the code for R1  :hifive:
If so  :#1:

"There's always a flaw, you just have to find it"-TwistedMind33

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #40 on: April 27, 2011, 01:22:00 PM »
lol good to see you.

as act said it will cause issues with the other buttons on that side of e controller. use hypers code in he open source section.


Offline lecrack65

  • ½ Pint
  • *
  • Posts: 37
  • Post quality +1/-1
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #41 on: April 28, 2011, 03:05:05 AM »
the exact triangle button round and square cross are also in rapid fire and r2 so I'll try something else and coming back to you
else if someone can give us a little rapid fire with 5 modes for the PS3 will trigger r1 ca cool

Offline tempermodz

  • Motor Mouth
  • *
  • Posts: 81
  • Post quality +0/-2
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #42 on: May 25, 2011, 06:56:52 PM »
Im a Beginner on this, I know how to input the code for the xbox, but how do you input this code to the chip for the ps3?
copy and paste ???

Offline tempermodz

  • Motor Mouth
  • *
  • Posts: 81
  • Post quality +0/-2
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #43 on: June 01, 2011, 07:53:08 PM »
Has anyone tried installing this just on the R Common point ? Meaning T18.
if someone did, did it work and anything happen?
« Last Edit: June 01, 2011, 07:57:07 PM by tempermodz »

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #44 on: June 02, 2011, 02:49:23 AM »
that will make all buttons on the right of the controller rapid fire all the time

Offline kikok

  • Guppy
  • *
  • Posts: 9
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #45 on: July 02, 2011, 11:31:38 AM »
please help me i try it to make rapid fire and screwed with soldeer gun

R1 button does not work anymore please help Thank you in advance here is 2 picture

the soldeer point screwed

https://www.acidmods.com/forum/index.php/topic,39862.0.html


Offline tempermodz

  • Motor Mouth
  • *
  • Posts: 81
  • Post quality +0/-2
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #46 on: July 03, 2011, 01:57:11 PM »
does this RF mod works ?also does it work with the newest board ? V4 does it suppose to fire with one of the tactical buttons? can anyone post diagrams for the newest board
« Last Edit: July 03, 2011, 02:39:15 PM by tempermodz »

Offline hyper999

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1158
  • Post quality +544/-3
  • Research and Development
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #47 on: July 03, 2011, 02:22:14 PM »
does this RF mod works ?also does it work with the newest board ? V4 does it suppose to fire with one of the tactical buttons?

yes yes yes yes yes yes yes

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #48 on: January 13, 2013, 08:01:49 PM »
Just a heads up, I went out and bought a new ps3 controller on Thursday and it was a controller revision not show in the tutorial. However, I was able to manage to make it work by following the traces and soldering to them. Bottom line is this still works on new controllers.

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #49 on: January 14, 2013, 08:48:19 AM »
Just a heads up, I went out and bought a new ps3 controller on Thursday and it was a controller revision not show in the tutorial. However, I was able to manage to make it work by following the traces and soldering to them. Bottom line is this still works on new controllers.

not surprised this tut is almost 3 years old....

Good to know.

Offline Anonamous

  • The Unknown Identity
  • Granny Spanker
  • *
  • Posts: 472
  • Post quality +14/-1
  • Gender: Male
  • Electrical Engineering Student
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #50 on: January 16, 2013, 07:33:58 AM »
not surprised this tut is almost 3 years old....

Good to know.

Yes, I was just letting people know that it still works on new controllers if you ca follow the traces from the buttons to the controller board. Figured it was worth bumping up the thread to do so. Unfortunately the trace for R2 (not sure about R1) had to be accessed from the front of the controller (The side that has the LED's o it) because the via is strategically placed underneath the main IC chip.

Offline untamedsail0r

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: PS3 rapid fire BY "Ack Like You Know" an acidmods member
« Reply #51 on: January 16, 2013, 10:36:01 AM »
Well all this schematic n code for pic worked in first time for me. But i think most ps3 games are now patched for rf. Couldn't make 9,16 n 24 sps work on max payne 3. Gun jams after some time. Lots of thanks for this mod anyway.

Sent from my Xperia Arc using Tapatalk 2
« Last Edit: January 16, 2013, 10:37:42 AM by untamedsail0r »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal