Author Topic: 2915 Work Log - PSP Dash mod  (Read 7098 times)

Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
2915 Work Log - PSP Dash mod
« on: January 17, 2013, 10:21:18 AM »
I will be uploading my photos tonight (and will just edit this post)

I will be doing a PSP 1000 mod with a bunch of the normal led's and what not so nothing to special except i will be atempting to wire them to the UMD motor to make them spin =)

The big part of this mod will be building a vacume forming table so i can make a custom Dash mount for by car as i have long since removed my deck and would like to make my PSP my deck.

Stay tuned for photos
« Last Edit: April 08, 2013, 06:05:12 PM by Modded Matt »

Offline nEoVaLoR

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 734
  • Post quality +36/-26
  • Gender: Male
  • Young Modder
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #1 on: January 17, 2013, 05:39:14 PM »
I will be uploading my photos tonight (and will just edit this post)

I will be doing a PSP 1000 mod with a bunch of the normal led's and what not so nothing to special except i will be atempting to wire them to the UMD motor to make them spin =)

The big part of this mod will be building a vacume forming table so i can make a custom Dash mount for by car as i have long since removed my deck and would like to make my PSP my deck.

Stay tuned for photos

What? How in the heck are you planning to do that?

Sounds AWESOME if you could pull it off but i'm not sure how it could work.. Number one the motor only spins when a umd is inserted, and when you insert one wouldn't it cover up the leds? Number two wouldn't the wires get all twisted up and what not since they're moving? idk. just saying my thoughts out loud lol

Offline 1TONpete

  • Millennium Poster
  • *
  • Posts: 1224
  • Post quality +47/-2
  • Sony specialist
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #2 on: January 17, 2013, 06:19:10 PM »
Both kool ideas Bonz.
First my thoughts on the spinning action, if you want to re-use your umd drive motor, you could eliminate the whole drive circuit and just drive it off a voltage and a switch. Maybe wifi etc.
Also they make a generator/light combo attachment for dremils. something like tha could be adapted to work. You might run into trouble with the spining and trying to run wires or contacts to your leds. 

Your deck idea is cool. I started out doing one for my Vita and ended up putting in an android 7" tab. My dash was previously modded to accept a 7" lcd. I just removed the lcd in the dash and made a dock for it. Not sure if I still got build pics from it but , I could show what the end result came out like.
My final choice of the tablet was better given the larger screen.
« Last Edit: January 17, 2013, 06:23:08 PM by 1TONpete »

Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #3 on: January 17, 2013, 10:11:45 PM »
thank you guys.

your both very correct i will be disabling the way the umd drive works and will likely wire up the umd motor to a roller switch (like an old volume nob on a gameboy) so i can adjust the speed.  as for how to run the led's think of that old electric race track you had when you were a kid, or even a train set.  same idea for powering the leds.  hopefully the power needed is so low it won't generate sparks but who knows!

pics should be up in an hour or so

Offline 1TONpete

  • Millennium Poster
  • *
  • Posts: 1224
  • Post quality +47/-2
  • Sony specialist
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #4 on: January 18, 2013, 11:19:37 AM »
Just an idea but , do you know how a points system works in older cars?
You could have the spinning action light up leds as it hits contacts for them like a points distributor. Giving a flashing rotating pattern.

Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #5 on: January 18, 2013, 06:51:36 PM »
Just an idea but , do you know how a points system works in older cars?
You could have the spinning action light up leds as it hits contacts for them like a points distributor. Giving a flashing rotating pattern.


wow that would look really cool... but i'm kinda thinking of finding a tiny arduino type chip and making this a POV. but we will see how that works =)

Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #6 on: January 31, 2013, 08:56:31 PM »
Photo Upload time!

Sorry it has been a crazy few weeks with my 2nd child being born on the 19th but we are all settled in now and it's time to mod!


This First one is everything i have for the mod (so far)


https://www.dropbox.com/s/wfr41mwb6lzqloq/2013-01-31%2022.14.02.jpg



Here is just my PSP 1001 that i will be moding

https://www.dropbox.com/s/ico9nxi85skmwuw/2013-01-31%2022.14.50.jpg



Here is the dual Micro SD to Pro duo converter i bought on ebay and 2 16GB cards ($0.99)

https://www.dropbox.com/s/25b0kc6w3d6arng/2013-01-31%2022.15.14.jpg



Bran new Battery from ebay ($5)


https://www.dropbox.com/s/3l7kgztboqfqoue/2013-01-31%2022.15.43.jpg



Here are the 10 Micro Surface mount RGB LED's that i got from ebay ($6 for 10) i wanted to order just blue but the RGB were cheaper but i'll still likely be using just blue!


https://www.dropbox.com/s/2gg4yh3qpsshwxa/2013-01-31%2022.16.47.jpg



This weekend i will be working on my UMD Window I have a friend (maker of the ultimate useless machine) He has a sweet Laser Cutter so i will be doing the acid mods logo on the window =) and next weekend i will be likely doing my car dash dock!
« Last Edit: February 11, 2013, 11:07:37 AM by whitetop »

Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #7 on: February 11, 2013, 12:43:18 AM »
Ok so i haven't even done my disassembly yet but my buddy from frivolous engineering had some time to i took the UMD door off of the PSP so do some fun stuff with it.  here's what we came up with

Here is a pic of what we are using


https://www.dropbox.com/s/77p7nqk0v9i5nsx/2013-02-10%2019.14.53.jpg


the ring removed

https://www.dropbox.com/s/aoa9cwe6s1g9vzx/2013-02-10%2019.09.48.jpg


door in the cutter

https://www.dropbox.com/s/l8tb5j13pt0d68t/2013-02-10%2019.10.01.jpg


Here is the cut video!  ***WARNING WE TEND TO SWEAR A BUNCH***

https://www.dropbox.com/s/txt41ikno47pew5/2013-02-10%2019.20.17.mp4


Oh Ya your gonna love this video!!!

https://www.dropbox.com/s/t6ibi7xqp8gy1lh/2013-02-10%2019.52.37.jpg


Here's a better look

https://www.dropbox.com/s/omxgmjc1bv7vc67/2013-02-10%2019.54.34.jpg

https://www.dropbox.com/s/lna26qd2cyiai1e/2013-02-10%2019.54.30.jpg

The final Part

http://www.dropbox.com/s/t6ibi7xqp8gy1lh/2013-02-10%2019.52.37.jpg





I dono why but i seem unable to add Photo via the add photo OR by attaching them..... FUSTRATING
« Last Edit: February 11, 2013, 11:18:09 AM by whitetop »

Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #8 on: February 11, 2013, 11:19:48 AM »
looking nice i have fixed your pictures dropbox does not use direct linking this is why you get this problem saves bandwidth.
i have left the links under the images doe a better looks.


and looking nice by the way
come to the rite place if you kiss admins as they promote you to admin.

Offline crashmasher

  • Registered BST
  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 64
  • Post quality +4/-0
  • Gender: Male
  • Acidmods User
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #9 on: February 12, 2013, 05:10:12 PM »
Gotta love those laser cutters. I built my entire case from one for last years comp. Its amazing to see how good the quality of etched images are. I cant wait to see what else you have planned for the psp

Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #10 on: February 18, 2013, 10:27:08 AM »
thanks for making the pic's work.  i've started building the vacuum former and will post pics when it is done!

Offline snowcolt17

  • Local Moderator
  • Acid Modder
  • *
  • Posts: 552
  • Post quality +16/-1
  • Gender: Male
  • If all else fails, reflow it
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #11 on: February 18, 2013, 01:00:50 PM »
thanks for making the pic's work.  i've started building the vacuum former and will post pics when it is done!

nice work going on there..

on future reference in the dropbox Public folder. then add them ;)


Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #12 on: February 18, 2013, 11:06:21 PM »
so I've hit a road block and i was coping someone could help...

the motor for the umd (and laser control) are A/C powered (3 pins) so i won't be able to power them direct.  does anyone know where i could rob A/C power from in the psp... Or even better know of a piece of homebrew that will activate the drive motor?

my last ditch would be to grab a very tiny inverter to do the job but I'd rather not have to go that route

any help would be great

Offline halfamused

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +1/-0
  • Gender: Male
  • point me to the closest search engine
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #13 on: February 20, 2013, 05:17:53 AM »
Sounds like a tough one. Maybe make the psp spin it naturally while trying to read a scratched UMD Disc (extracted from case) mounted to the motor, then mount the LEDs to the top of the disc? If you did that, you could also scratch through the mirror coating in certain places to make a small laser show whenever its trying to read (personally I would electrocute it for the desired effect lol).

Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #14 on: February 21, 2013, 07:23:40 PM »
Sounds like a tough one. Maybe make the psp spin it naturally while trying to read a scratched UMD Disc (extracted from case) mounted to the motor, then mount the LEDs to the top of the disc? If you did that, you could also scratch through the mirror coating in certain places to make a small laser show whenever its trying to read (personally I would electrocute it for the desired effect lol).

not a bad idea but the psp shuts down the drive after about 30 sec of not being able to read the disk.  makes me wish that i could program, I'd just write something to activate the drive!

i may just find a tiny motor to replace it with. 

Offline halfamused

  • Chief squatting Hard
  • *
  • Posts: 16
  • Post quality +1/-0
  • Gender: Male
  • point me to the closest search engine
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #15 on: February 21, 2013, 11:41:25 PM »
Damn, wasn't aware of that. Have you come up with any alternatives?

Offline Bonz

  • I'm Back Baby
  • Who Farted ???
  • *
  • Posts: 217
  • Post quality +3/-1
  • Gender: Male
  • 2 1337 4 u
    • Bonznumber1
Re: 2915 Work Log - PSP Dash mod (working name)
« Reply #16 on: February 25, 2013, 09:22:22 AM »
Damn, wasn't aware of that. Have you come up with any alternatives?

nothing yet, i'm left with replace the motor or scrap the idea, and i'm having problems finding a motor, and i'm running out of time

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal