« previous next »
Pages: [1]   Go Down

Author Topic: JDM 011 Help For Missing Parts Value  (Read 1344 times)

Offline Kaunting Kaalaman

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
JDM 011 Help For Missing Parts Value
« on: December 25, 2018, 11:49:14 PM »
Hi there can you guys help me to find the same value for the missing part of my Dual Shock Controller, picture attached:


Can you please tell me what is the possible substitute part can be?
thanks in advance...
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM 011 Help For Missing Parts Value
« Reply #1 on: December 26, 2018, 07:26:06 AM »
It's an Inductor. The best place to get a replacement would be from some other bad controller board so all of the specs of it are correct and the PMIC works like it was designed. If I had to take a stab at a replacement, based off measuring a good one here, I'd call it a 4.7uH and try the SRN4018-4R7M in it's place. https://www.digikey.com/product-detail/en/bourns-inc/SRN4018-4R7M/SRN4018-4R7MCT-ND/3821520
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Kaunting Kaalaman

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM 011 Help For Missing Parts Value
« Reply #2 on: December 26, 2018, 10:27:42 PM »
Thanks RDC mod, its a big help
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal