« previous next »
Pages: [1]   Go Down

Author Topic: Elite Controller not going on with cable  (Read 795 times)

Offline youspoes

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
  • Acidmods User
Elite Controller not going on with cable
« on: January 22, 2021, 05:56:54 AM »
So i got a xbox one elite controller v1 and it doesnt turn on with cable. With batteries it works fine. I opened up the controller but the usb chargeport looks completely fine. No proken traces no loose solder pads nothing. Anyone know what it could be ?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Elite Controller not going on with cable
« Reply #1 on: January 22, 2021, 08:31:12 AM »
Top board, check R1, make sure there is 5v on both ides of it when the USB is plugged in. You can do these tests with just the top board alone.

If that's good, check the output of U1p5 (U1 pin number 5) it should be 3v

If there is 3v make sure it's getting to U2p1.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal