Author Topic: JDM-050 detects but doesn't charging  (Read 650 times)

Offline ZhenyaKa

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 61
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
JDM-050 detects but doesn't charging
« on: February 07, 2021, 04:46:52 PM »
When connected to PC consumes 43mA and detected well

At battery no voltage decreasing at all and not increasing when plugged in USB (tried 3.6 and 4.1V charged battery).

I replaced 7736ftg chip, but result the same.

At large resistor (near 7736ftg) that value near zero ohm I have 3.43V. Is it current sensor for charging battery?

3.2V at sticks is okay, 5V at small capacitor near 7736ftg okay to.

At battery contacts I have zero.

Please, help, where to dig?
« Last Edit: February 07, 2021, 04:56:02 PM by ZhenyaKa »

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal