« previous next »
Pages: [1]   Go Down

Author Topic: DS4 not full range with new Joystick  (Read 898 times)

Offline Sadenki

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
DS4 not full range with new Joystick
« on: September 24, 2021, 12:30:39 PM »
Hi, since 2019, I fix controller for my shop, but lately, I have encounter issue with Joystick replacement, ALPS or Polyshine, same issue.

New joystick don't have full range when soldered (I don't speak about offset, I know since a long time how to calibrate it by adding resistor).

Like new joystick, Go 95% left, 100% right. 100% up 80% down.
If I use another one, I can have different result, but always lack of fullrange.

I get this result with everything back in place (when out of sheel, they have full range on everyside).

Anybody have fix for that issue ?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: DS4 not full range with new Joystick
« Reply #1 on: September 24, 2021, 04:37:55 PM »
Sandpaper.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Sadenki

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: DS4 not full range with new Joystick
« Reply #2 on: September 24, 2021, 04:59:01 PM »
incrase diameter of ring could help, but I repair mostly Scuf controller, so customer won't like this option.
Thx for your reply
Logged

Offline dj_amir

  • Chief squatting Hard
  • *
  • Posts: 19
  • Post quality +0/-0
  • Acidmods User
Re: DS4 not full range with new Joystick
« Reply #3 on: September 25, 2021, 04:50:08 AM »
Hi
Use Potentiometer 6.3 kohm

https://ibb.co/QJx9pLD
Logged

Offline Eren_Ackerman

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 64
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: DS4 not full range with new Joystick
« Reply #4 on: October 13, 2021, 05:37:22 PM »
The same is happening to me now with a JDM-040

Logged

Offline ChrisJavier

  • Fart Sniffer
  • *
  • Posts: 44
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: DS4 not full range with new Joystick
« Reply #5 on: October 14, 2021, 08:20:57 PM »
Would replacing the pot fix this issue?
Logged

Offline Eren_Ackerman

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 64
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: DS4 not full range with new Joystick
« Reply #6 on: October 18, 2021, 01:35:55 PM »
Quote from: ChrisJavier on October 14, 2021, 08:20:57 PM
Would replacing the pot fix this issue?


I "fixed" mine by bending the plastic "spike" that engages to the potentiometer a little bit in the "down" direction. Then I lubricated the surface between the potentiometer and the metallic structure of the analog stick with the intention to reduce friction that could potentially bend the plastic to its original shape.

I know, I know, it's not a fix I should be "proud" of, but it did the trick for now.
« Last Edit: October 18, 2021, 01:37:19 PM by Eren_Ackerman »
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal